Rycote have developed a little upgrade for the INV-Lite mount itself, which provides en...
8.00 EUR 12.00 EUR
store
local_shipping
Rycote
055345 Baseball Mini Windjammer
Baseball Windjammer from Rycote is made from synthetic fur that is specially sourced and constructed to provide maximum wind protection and audio transparency.
46.00 EUR
store
local_shipping
INFO
Dinkum
1/4" to 3/8" Adaptor Screw
Already own one of the Dinkum Systems® ActionPod® mounts or any other device wi...
7.00 EUR
store
local_shipping
Rycote
10 cm Hot Shoe Extension [037303]
The Rycote 037303 Cold Shoe Extension is a 4" bar that fits in your camera's hot shoe m...
39.00 EUR
store
local_shipping
Rycote
10cm Classic-Softie (19/22) [033022]
Rycote Softies provide optimum wind diffusion and noise rejection while remaining cost...
138.00 EUR
store
local_shipping
INFO
Rycote
10cm Classic-Softie (24/25) [033023]
Suitable for small diaphragm condenser microphones, with slots no further than 10 cm fr...
138.00 EUR
store
local_shipping
INFO
Rycote
10cm SGM Foam & Windjammer (19/22)
The Shotgun Mic Foam and Windjammer Combo from Rycote is a slip on wind solution for sh...
69.00 EUR
store
local_shipping
INFO
Rycote
10cm SGM Foam & Windjammer (24/25)
Suitable for shotgun microphones, with slots no further than 10 cm from the front of th...
69.00 EUR
store
local_shipping
INFO
Rycote
10cm SGM Foam (19/22) (10 Pack)
The Rycote 104408 10cm Standard Hole SGM Foam (10-Pack) is ideal for protecting your sh...
257.00 EUR
store
local_shipping
INFO
Rycote
Kampaaniad
10cm SGM Foam (19/22) (Single)
The Rycote 104408 10cm Standard Hole SGM Foam is ideal for protecting your shotgun micr...
21.00 EUR 29.00 EUR
store
local_shipping
Rycote
10cm SGM Windjammer
This Rycote Windjammer is intended to cover an existing Rycote foam windscreen and deli...
49.00 EUR
store
local_shipping
INFO
König & Meyer
11903 Pr.Shield With Stand
The flexible and mobile stand for increased protection against infection. In the music...
207.00 EUR
store
local_shipping
INFO
König & Meyer
12152 Mouse Rest
Clampable mouse rest for tubes up to 30 mm diameter. Mouse pad included...
46.00 EUR
store
local_shipping
Rycote
12cm Classic-Softie (19/22) [033032]
Rycote Softies provide optimum wind diffusion and noise rejection while remaining cost...
138.00 EUR
store
local_shipping
Rycote
12cm Classic-Softie (24/25) [033033]
Rycote softies provide optimum wind diffusion and noise rejection while remaining cost...
138.00 EUR
store
local_shipping
INFO
Rycote
12cm Classic-Softie Camera Kit (19/22)
All-in-one suspension and windshield kit for shotgun microphones, with slots no further than 12cm from the front of the mic and 19-22mm in diameter
257.00 EUR
store
local_shipping
INFO
Rycote
12cm Classic-Softie Kit (19/22) [033332]
The Rycote 12cm Softie / Pistol-Grip Kit conveniently provides both, a durable pistol-g...
257.00 EUR
store
local_shipping
INFO
Rycote
12cm SGM Foam & Windjammer (19/22)
The Shotgun Mic Foam and Windjammer Combo from Rycote is a slip on wind solution for sh...
69.00 EUR
store
local_shipping
Rycote
12cm SGM Foam & Windjammer (24/25)
12cm SGM Foam & Windjammer (24/25)
69.00 EUR
store
local_shipping
INFO
Rycote
12cm SGM Foam (19/22) (10 Pack)
The Rycote 104410 12cm Standard Hole SGM Foam (10-Pack) is ideal for protecting your sh...
257.00 EUR
store
local_shipping
Rycote
12cm SGM Foam (19/22) (Single)
The Rycote 104410 12cm Standard Hole SGM Foam is ideal for protecting your shotgun micr...
29.00 EUR
store
local_shipping
INFO
Rycote
12cm SGM Windjammer
This Rycote Windjammer is intended to cover an existing Rycote foam windscreen and deli...
49.00 EUR
store
local_shipping
INFO
RME
12MIC Preamp
RMEs first preamp for audio networks12 transparent mic preamp for exceptional aud...
2737.00 EUR
store
local_shipping
INFO
RME
12Mic-D
Audio interface with 12 microphone preamps and Dante, ADAT and MADI.
3600.00 EUR
store
local_shipping
König & Meyer
14086 Piano bench
Piano bench
213.00 EUR
store
local_shipping
INFO
Rycote
15cm Classic-Softie (19/22) [033042]
Rycote Softies provide optimum wind diffusion and noise rejection while remaining cost effective. This softie features a standard size hole and measures 15cm (5.91") in length. The softie will fit microphones with diameters from 19-22mm (0.74-0.87").
138.00 EUR
store
local_shipping
Rycote
15cm Classic-Softie Camera Kit (19/22) [116011]
Classic-Softie Camera Kit for Shotgun Microphones (15cm) is an all-in-one kit for outside filming using your camera mounted shotgun microphone with a slot no further than 15cm from the front of the mic and 19-25mm in diameter.
257.00 EUR
store
local_shipping
Rycote
15cm Classic-Softie Kit (19/22) [033342]
Wind protection solution designed for microphones with a diameter of 19 to 22mm. This kit includes the Classic-Softie windscreen, providing excellent wind noise reduction while preserving the clarity of the recording.
257.00 EUR
store
local_shipping
INFO
Rycote
15cm SGM Foam & Windjammer (19/22) [055207]
The Shotgun Mic Foam and Windjammer Combo from Rycote is a slip on wind solution for sh...
69.00 EUR
store
local_shipping
Rycote
15cm SGM Foam (19/22) (10 Pack)
15cm Standard Hole SGM Foam (10-Pack) is ideal for protecting your shotgun microphone from the elements, especially wind noise.
257.00 EUR
store
local_shipping
INFO
Rycote
15cm SGM Foam (19/22) (Single) [104402]
The Rycote 104402 15cm Standard Hole SGM Foam is ideal for protecting your shotgun micr...
29.00 EUR
store
local_shipping
Rycote
15cm SGM Windjammer
This Rycote Windjammer is intended to cover an existing Rycote foam windscreen and deli...
49.00 EUR
store
local_shipping
INFO
Rycote
15cm Super-Softie (19/22) [033202]
15cm Super-Softie Wind Shield for Shotgun Mics features an aerodynamic shape and surface structure made from the company's 3D-Tex material, which allows for attenuation of wind noise with acoustic transparency.
174.00 EUR
store
local_shipping
König & Meyer
16019 Drink Holder
Metal holder for holding bottles, glasses and cups. Suitable for table tops. Clamp 40mm, height 80mm, 0.34 kg.
24.00 EUR
store
local_shipping
König & Meyer
16026 Drink Holder XL
Drinkholder, clamps on to pipes up to 30mm, steel, Extra Large model, Black.
29.00 EUR
store
local_shipping
König & Meyer
16027 Drink holder Biobased
Holder for glass, jar or bottle, made of bio-based plastic, attached to stand, black.
20.00 EUR
store
local_shipping
Rycote
18cm Classic-Softie (19/22) [033052]
Rycote Softies provide optimum wind diffusion and noise rejection while remaining cost...
138.00 EUR
store
local_shipping
Rycote
18cm Classic-Softie (24/25) [033053]
Rycote softies provide optimum wind diffusion and noise rejection while remaining cost...
138.00 EUR
store
local_shipping
Rycote
18cm Classic-Softie Camera Kit (19/22) [116012]
18cm Classic-Softie Camera Kit. 19-22mm.
257.00 EUR
store
local_shipping
Rycote
18cm Classic-Softie Kit (19/22) [033352]
The Rycote 18cm Softie / Pistol-Grip Kit conveniently provides both, a durable pistol-g...
257.00 EUR
store
local_shipping
INFO
Rycote
18cm Classic-Softie Kit (24/25) [033353]
Softie Windshield Kit 18cm 24/25 includes a Sofite Windshield, Lyre shock-mount and Pistol-grip
257.00 EUR
store
local_shipping
INFO
Rycote
18cm ME66 SGM Foam & Windjammer [055210]
The Shotgun Mic Foam and Windjammer Combo from Rycote is a slip on wind solution for sh...
69.00 EUR
store
local_shipping
Rycote
18cm ME66 SGM Foam (10 Pack)
The Shotgun Mic Foam is a discreet, slip-on foam windshield, designed to protect the mi...
257.00 EUR
store
local_shipping
INFO
Rycote
18cm ME66 SGM Foam (Single)
The Rycote Shotgun Mic Foam series of windscreens feature an open-cell acoustic foam ma...
29.00 EUR
store
local_shipping
INFO
Rycote
18cm SGM Foam & Windjammer (19/22) [055208]
The Shotgun Mic Foam and Windjammer Combo from Rycote is a slip on wind solution for sh...
69.00 EUR
store
local_shipping
INFO
Rycote
18cm SGM Foam & Windjammer (24/25) [055209]
The Shotgun Mic Foam and Windjammer Combo from Rycote is a slip on wind solution for sh...
69.00 EUR
store
local_shipping
Rycote
18cm SGM Foam (19/22) (10 Pack)
18cm SGM Foam (19/22) (10 Pack)...
275.00 EUR
store
local_shipping
INFO
Rycote
18cm SGM Foam (19/22) (Single) [104401]
The Rycote 104401 18cm Standard Hole SGM Foam is ideal for protecting your shotgun micr...
29.00 EUR
store
local_shipping
Rycote
18cm SGM Foam (24/25) (10 Pack)
The Rycote 104413 18cm Large Hole SGM Foam (10-Pack) is ideal for protecting your shotg...
257.00 EUR
store
local_shipping
INFO
Rycote
18cm SGM Foam (24/25) (Single) [104413]
The Rycote 104413 18cm Large Hole SGM Foam is ideal for protecting your shotgun microph...
29.00 EUR
store
local_shipping
Rycote
18cm SGM Windjammer
This Rycote Windjammer is intended to cover an existing Rycote foam windscreen and deli...
49.00 EUR
store
local_shipping
INFO
Rycote
18cm Super-Softie (19/22) [033203]
18 cm Super-Softie (19/22)
174.00 EUR
store
local_shipping
INFO
Rycote
18cm Super-Softie (24/25) [033204]
The large hole Rycote 18cm Super-Softie Wind Shield for Shotgun Mics features an aerody...
174.00 EUR
store
local_shipping
INFO
König & Meyer
19400 Stand Adaptor
Mount a small mixer or monitor speaker on a microphone stand. Max. load capacity: 5 kg
31.00 EUR
store
local_shipping
König & Meyer
19410 Clamp Bracket
Multipurpose clamp for installing equipment on a desk or other surface.
86.00 EUR
store
local_shipping
INFO
König & Meyer
19671 Speaker Tilt
Tilt connector, 15 degrees angle, adjustable depth 50 mm
40.00 EUR
store
local_shipping
INFO
König & Meyer
19695-100
The flexible universal joint can be used on practically any microphone stand and gives you more freedom than ever by providing maximum flexibility for positioning a range of equipment such as microphones, hand-held recorders, etc.
28.00 EUR
store
local_shipping
König & Meyer
19695-300
K&M 19695-300 - universal mount with 3/8" interior thread to 3/8" exterior thread.
26.00 EUR
store
local_shipping
König & Meyer
19753 Smartphone Holder
Universal holder with 3/8" or 5/8" thread - suitable for smartphones, flat devices and MP3 players.
26.00 EUR
store
local_shipping
König & Meyer
19755 Smartphone Holder
Universal holder suitable for all flat devices with a width of 55 to 85 mm. Quick mounting on any tube with a diameter of 10 to 30 mm, 55-85 mm, 0.23 kg.
20.00 EUR
store
local_shipping
König & Meyer
19756 Desktop Smartphone Stand
Universal Desktop smartphone stand for all flat devices with a width of 55 to 85 mm, 200mm, 0.62 kg.
37.00 EUR
store
local_shipping
König & Meyer
19788 Universal Stand
Universal stand, the stand can be combined with a boom arm, microphone, small speaker cabinet, smartphone/tablet holder, etc. 550 mm base, height 620 to 1470 mm, steel, 1.4 kg.
44.00 EUR
store
local_shipping
König & Meyer
19795
Smaller Tablet devices have a safe and secure hold: The Universal Tablet Holder can be...
42.00 EUR
store
local_shipping
König & Meyer
19796
Universal Tablet Holder for different models. The Universal Tablet Holder can be adjust...
76.00 EUR
store
local_shipping
König & Meyer
19797
Stable Table Stand with Universal Tablet Holder for different models. With this high-qu...
65.00 EUR
store
local_shipping
INFO
König & Meyer
19798
The combination of the stand and the Universal Tablet Holder supports you on stage, at...
Renowned DPA soundNatural vocals from folk to metalReduces feedback issues
656.00 EUR
store
local_shipping
INFO
König & Meyer
20800
This compact overhead microphone stand is now even lighter and more stable. Thanks to a...
108.00 EUR
store
local_shipping
König & Meyer
20811
A microphone stand in a two-piece folding design that extends to over 4 m and as such is very suitable for organ and choir recordings. Height 1850 - 4400 mm, Weight 9,94 kg
258.00 EUR
store
local_shipping
Rycote
20mm BBG Windshield
The Baby Ball Gag Windshield is a low-profile ball type wind diffuser for cylindrical m...
165.00 EUR
store
local_shipping
INFO
König & Meyer
210/4B
Height: 900 - 1605 mm Boom length: 470 - 770 mm Weight: 3,2 kg...
85.00 EUR
store
local_shipping
König & Meyer
210/8B
The K&M 210/8 Microphone Stand (Black) features a telescoping microphone stand and...
63.00 EUR
store
local_shipping
König & Meyer
210/8C Mic stand chrome
Microphone Stand Chrome. Height 925 to 1630 mm, Bom length: 425 to 725 mm.
90.00 EUR
store
local_shipping
König & Meyer
210/8G
K&M 210/8 Micro Stand - with extending boom.three leg base, Height adjustable from...
86.00 EUR
store
local_shipping
König & Meyer
210/9B
The K&M 210/9 (Black) tripod microphone stand and boom offers sturdy support for li...
72.00 EUR
store
local_shipping
König & Meyer
210/9C Mic stand chrome
Microphone Stand Chrome. Height 925 to 1630 mm, Bom length: 425 to 725 mm.
82.00 EUR
store
local_shipping
König & Meyer
210/9W Microphone stand wht
A more compact version of the classic 210/2. The combination of the long-legged 201A/2 mic stand and the 211/1 telescopic boom arm. Height 900 - 1605 mm, boom 460 - 770 mm, 3.2kg, white.
98.00 EUR
store
local_shipping
König & Meyer
21010 Microphone Stand
Microphone stand with boom arm, extra sturdy & secure arm clamping, telescopic boom arm 420-730mm, height 1030-1730 mm, black finish.
89.00 EUR
store
local_shipping
König & Meyer
21020 Mic Stand Black
Microphone stand
87.00 EUR
store
local_shipping
König & Meyer
21021B
The K&M 21021B overhead tripod microphone boom stand offers the height and durabili...
97.00 EUR
store
local_shipping
König & Meyer
21060B
Boom arm: one-piece designBoom arm clamping: wing nutBoom arm length: 805 m...
62.00 EUR
store
local_shipping
König & Meyer
21060G
Modern update of the classic 210/2 - Height: from 925 to 1,630 mm - gray ...
67.00 EUR
store
local_shipping
König & Meyer
21070
Low-priced all-metal-stand. Consists of tubing assembly, boom arm and zinc die-cast bas...
51.00 EUR
store
local_shipping
König & Meyer
211/1
Classic tow-piece telescopic boom arm with 3/8" thread. Silent, scratchless swivel join...
39.00 EUR
store
local_shipping
König & Meyer
211/1B
The 211/1 Boom Arm is an extendable tube combination with a 3/8” connector thread...
30.00 EUR
store
local_shipping
König & Meyer
21105 Counter Weight
Used for heavy microphones. Fits all one-piece K&M boom arms with 3/8" thread conne...
23.00 EUR
store
local_shipping
König & Meyer
21140 Boom Arm
Two-piece telescopic boom arm with 3/8" thread. Complete with locking washer and plasti...
32.00 EUR
store
local_shipping
König & Meyer
21150 Boom Arm XL
Boom arm, Extra long, fits on 3/8" threds, extra sturdy & secure clamping, telescopic 420-730mm, black finish.
43.00 EUR
store
local_shipping
König & Meyer
21160 Boom Arm
Short one-piece boom arm with 3/8" thread. Locking washer and plastic grip. Smooth adjustment. Easy to tighten with wing nut.. Boom arm length: 395 mm
20.00 EUR
store
local_shipping
König & Meyer
211B
Boom arm for microphone stand, 800 mm long, 3/8" thread, black.
32.00 EUR
store
local_shipping
König & Meyer
21231
Weight: 5.3 kg, Bom Length: 1155/2060 mm. ...
122.00 EUR
store
local_shipping
König & Meyer
21232 Boom arm
Boom arm
127.00 EUR
store
local_shipping
INFO
König & Meyer
21315 Carrying case
Sturdy carrying case for 6 microphone stands. Separate internal compartments prevent sc...
82.00 EUR
store
local_shipping
König & Meyer
21411 Overhead Mic Stand
Extremely sturdy overhead mic stand for studio and broadcast applications. Extendible u...
123.00 EUR
store
local_shipping
König & Meyer
21430 Overhead Mic Stand
Mobile heavy steel microphone stand for studio or stage. 10 kg cast metal base, low cen...
289.00 EUR
store
local_shipping
König & Meyer
21431
The short moveable microphone boom arm is suitable for many applications. It is particu...
27.00 EUR
store
local_shipping
König & Meyer
215
Thread Adapter - Zinc- Plated. 1/2" and 3/8" female thread, 5/8" 27 gauge male thread.
Useful microphone fishing pole made of aluminum tubing; 3-piece folding design. The cla...
89.00 EUR
store
local_shipping
König & Meyer
23765 Microphone fishing pole
Useful microphone fishing pole made of aluminum tubing; 4-piece folding design. The cla...
126.00 EUR
store
local_shipping
INFO
König & Meyer
23782
Fishing Pole Large
235.00 EUR
store
local_shipping
INFO
König & Meyer
23783
Fishing Pole Large
281.00 EUR
store
local_shipping
INFO
König & Meyer
237B
The 237B Table Clamp (Black) from K&M is a table clamp whose mouth can be adjusted...
15.00 EUR
store
local_shipping
König & Meyer
23830 Microphone Holder
Sturdy microphone mounting bar, made of powder-coated steel, with 3/8" threaded connection for clamping to tube diameters up to 30 mm.
14.00 EUR
store
local_shipping
König & Meyer
23840
Flexible desktop microphone boom arm with 3/8" or 5/8" threaded connection for recording studios and multimedia workstations. Clamp 20-51cm, length 460-960 mm, max load 0.8 kg, 1.38 kg.
73.00 EUR
store
local_shipping
König & Meyer
23850
Our popular, smooth-running microphone desk arm with 3/8" or 5/8" thread connector for...
107.00 EUR
store
local_shipping
König & Meyer
23855
Table Flange, Black. Suitable for microphone arm 23850 and 23860.
25.00 EUR
store
local_shipping
König & Meyer
23856
Wall Mount for Microphone Desk Arms
28.00 EUR
store
local_shipping
König & Meyer
23860
This exclusive microphone arm with a 3/8" or 5/8" thread connector in a modern design w...
206.00 EUR
store
local_shipping
König & Meyer
23865
Microphone Desk Arm
183.00 EUR
store
local_shipping
König & Meyer
238B
Attaches to stands with diameter up to 30 mm. 3/8" threaded bolt for attaching goosenec...
20.00 EUR
store
local_shipping
König & Meyer
23900
The extremely practical Quick-Release adapter facilitates the quick and easy change of...
19.00 EUR
store
local_shipping
König & Meyer
23903-100 Thread Bolt 1/4"
Thread Bolt 1/4" which makes it possible to attach several microphones, photo cameras, video cameras or other devices to a microphone stand equipped with the Quick Release Adapter 23900
8.00 EUR
store
local_shipping
INFO
König & Meyer
23903-300 Thread Bolt 3/8"
Thread Bolt 3/8" which makes it possible to attach several microphones, photo cameras, video cameras or other devices to a microphone stand equipped with the Quick Release Adapter 23900
8.00 EUR
store
local_shipping
INFO
König & Meyer
23956
The K&M Popkiller - a world-wide classic. For stands with diameter of up to 30 mm....
27.00 EUR
store
local_shipping
König & Meyer
23966
The large Popkiller for modern studio engineering. The large 200 mm nylon screen guaran...
45.00 EUR
store
local_shipping
König & Meyer
240/1
Microphone Arm - Black. Height: 340 mm, Bom Length: 605 mm Attaches t...
48.00 EUR
store
local_shipping
König & Meyer
240/5
Universal microphone holder suitable for many applications. The microphone can be mount...
39.00 EUR
store
local_shipping
König & Meyer
24030B
Unique, compact holder to attach microphones to drums. Easy to mount and remove. Rubber...
18.00 EUR
store
local_shipping
König & Meyer
24035B
24035 Microphone holder for drums - blackCompact holder to attach microphones to...
25.00 EUR
store
local_shipping
König & Meyer
24517 Mini TV pin
Mini TV pin
6.00 EUR
store
local_shipping
INFO
König & Meyer
24621
4 fittings to mount spotlights to lighting stand 24620 or cross bar 24622. ...
23.00 EUR
store
local_shipping
INFO
König & Meyer
24637
Load capacity up to 8 kg. Weight: 0.6 kg, Length: 665 mm. ...
52.00 EUR
store
local_shipping
INFO
Rycote
24cm Classic-Softie (19/22) [033072]
Rycote Softies provide optimum wind diffusion and noise rejection while remaining cost...
138.00 EUR
store
local_shipping
INFO
König & Meyer
252
Weight: 2.9 kg, H: 620/1470 mm, Bom Length: 490/795 mm...
82.00 EUR
store
local_shipping
König & Meyer
25400
Entry-level, low-priced microphone stand. The practical swivel joint allows the one-pie...
30.00 EUR
store
local_shipping
König & Meyer
25530 Extra-long boom arm
Telescopic, extra-long stand boom, black, stepless length adjustment, 3/8" thread.
48.00 EUR
store
local_shipping
König & Meyer
255B
Boom arm: 2-piece telescopic designBoom arm clamping: T-bar locking screwBo...
109.00 EUR
store
local_shipping
König & Meyer
25600
High-quality microphone stand with telescopic boom arm. Die-cast base with folding legs...
96.00 EUR
store
local_shipping
König & Meyer
25680
With the unique - Soft-Touch« one-hand clutch the height can be adjusted with a q...
91.00 EUR
store
local_shipping
König & Meyer
25800
This variable microphone clamp has everything you need. A sophisticated mechanism allow...
70.00 EUR
store
local_shipping
König & Meyer
259/1B
Extra low design for bass drums or special use. Comes complete with boom arm. Attractiv...
72.00 EUR
store
local_shipping
König & Meyer
25907
Microphone Stand...
62.00 EUR
store
local_shipping
König & Meyer
25910
Extra low design for bass drums or special use. Comes complete with boom arm. Attractiv...
62.00 EUR
store
local_shipping
König & Meyer
25950
Extra low design for bass drums or special use. Very short and heavy legs provide maxim...
79.00 EUR
store
local_shipping
König & Meyer
25960
Low profile round-base mic stand with telescopic boom arm, designed for bass drums and...
71.00 EUR
store
local_shipping
König & Meyer
25993 Microphone Stand
Compact, space-saving microphone stand for bass drums, AMPs, Cajons, etc. The flat, sta...
87.00 EUR
store
local_shipping
König & Meyer
25995
This useful and versatile steel microphone table stand ensures stability and functional...
69.00 EUR
store
local_shipping
König & Meyer
259B
Low 2-piece microphone stand with 2-piece boom. Height: 425 - 645 mm. Black color.
89.00 EUR
store
local_shipping
Rycote
25mm BBG Windshield [011003]
The Baby Ball Gag Windshield is a low-profile ball type wind diffuser for cylindrical m...
165.00 EUR
store
local_shipping
König & Meyer
260/1
Microphone Stand - Nickel. Cast-iron round base, with anti-vibration rubber insert for...
69.00 EUR
store
local_shipping
König & Meyer
260/1B
The K&M 260/1 Microphone Stand (Black) has a metal cast-iron base which features an...
45.00 EUR
store
local_shipping
König & Meyer
260/1G
The K&M 260 Microphone Stand (Black) has an extra heavy metal cast-iron base which...
67.00 EUR
store
local_shipping
König & Meyer
260/1W Microphone stand White
Straight microphone stand with round base, white finish. Height: 870/1575 mm, round base diameter 250 mm.
79.00 EUR
store
local_shipping
König & Meyer
260/8
1400-3280 mm...
137.00 EUR
store
local_shipping
König & Meyer
26007-300-55 Microphone highstand
Extra high tube combination for special recording techniques and antenna positions. The...
57.00 EUR
store
local_shipping
König & Meyer
26009 Base plate mic.stand
The threaded connector M20 x 1.25 mm fine thread is suitable for all K&M microphone...
59.00 EUR
store
local_shipping
König & Meyer
26045
This model has a round, heavy cast-base with a cut-out design that allows for stacking...
64.00 EUR
store
local_shipping
INFO
König & Meyer
26050
Microphone stand with extra-long extension for studio, stage or rehearsal room. 1050-1750 mm, 3.2 kg.
62.00 EUR
store
local_shipping
König & Meyer
26085
With the unique - Soft-Touch« one-hand clutch the height can be adjusted with a q...
75.00 EUR
store
local_shipping
König & Meyer
260B
The K&M 260 Microphone Stand (Black) has an extra heavy metal cast-iron base which...
72.00 EUR
store
local_shipping
König & Meyer
26125
Perfect presentation and function: this heavy duty, large round base microphone stand i...
89.00 EUR
store
local_shipping
INFO
König & Meyer
26145
Significant Stand Point! The larger tubing reaches a height of 1.7 m and as such is wel...
100.00 EUR
store
local_shipping
König & Meyer
26200
The new star in your show! The avant-garde, one-hand microphone stand is setting new st...
126.00 EUR
store
local_shipping
König & Meyer
26250
The practical one-hand microphone stand Performance impresses through its reliability a...
110.00 EUR
store
local_shipping
König & Meyer
26700W Base Plate White
Flat round base suitable for all common distance rods and rod combinations using a M20...
81.00 EUR
store
local_shipping
INFO
König & Meyer
26704
The external dimensions of the medium-sized base plate are 480 x 480 mm and it weighs 1...
183.00 EUR
store
local_shipping
INFO
König & Meyer
26705
Heavy and sturdy base plate for all common distance rods and tube combinations with M20 threaded bolts. 550 x 550 x 27,3 mm, 13.5 kg.
210.00 EUR
store
local_shipping
INFO
König & Meyer
26705W Base Plate White
Heavy and sturdy base plate for all common distance rods and tube combinations wi...
220.00 EUR
store
local_shipping
INFO
König & Meyer
26753 Projector Tray
Tray for projectors, monitors & other equipment, fits on speakerstand with a pipe diameter of 35mm, steel, black.
48.00 EUR
store
local_shipping
INFO
König & Meyer
27105 Microphone stand
Inexpensive, handy table microphone stand for professional use. Sturdy plastic base wit...
53.00 EUR
store
local_shipping
König & Meyer
27195 Microphone stand
Inexpensive stand with professional features. Fiberglass-reinforced plastic base with f...
71.00 EUR
store
local_shipping
König & Meyer
27500 XLR Microphone Stand
Professional microphone stand with XLR connections and built in gooseneck. 1165-1520 mm, 3,3 kg.
123.00 EUR
store
local_shipping
König & Meyer
27500 XLR Microphone Stand Gooseneck Black
Professional stand, Built in wired XLR connections, Gooseneck, 3-pin XLR connector, Height: 1.520 mm, 3.3 kg, Black.
Classic Touring Kit with 4 Mics and Accessories (Loud SPL)
2573.00 EUR
store
local_shipping
INFO
Rycote
45/100 Large Diaphragm Mic Foam Single
Protect your large diagram microphone from wind noise and the elements with the Rycote...
30.00 EUR
store
local_shipping
INFO
Rycote
45/100 Windjammer for foam [055428]
Rycote Windjammer for 45/100 Foam for Large Diaphragm Condenser...
53.00 EUR
store
local_shipping
Solid State Logic
500-Series VHD+ Preamp
Infused with technology from SSL's flagship large-format analog console, the Solid...
750.00 EUR
store
local_shipping
Dunlop
5010 Dunlop Mic Stand Pkhldr 7"
It's happened before. You're midsong, getting ready for that ripping solo, when —...
9.00 EUR
store
local_shipping
dbx
Kampaaniad
580 Mic Pre-amp
dbx 580 Microphone Preamp is the perfect partner to your microphones, providing sonically-transparent gain that will reveal the detail and audio signature of even the most esoteric microphones.
389.00 EUR 443.00 EUR
store
local_shipping
INFO
Rycote
5cm Classic-Softie (19/22) [033012]
5cm Classic-Softie (19/22), Cost effective windshielding which is tough enough to endure ENG and location recording.
110.00 EUR
store
local_shipping
Rycote
5cm Classic-Softie (24/25) [033013]
Slip-on for and open cell foam windshield suitable for cylindrical microphones with slots no further than 5cm from the front of the mic and a diameter of 24-25mm.
110.00 EUR
store
local_shipping
INFO
Rycote
5cm Classic-Softie Kit (19/22) [033312]
The 5cm Standard Hole Classic-Softie Kit from Rycote features a Softie Windshield, a Ly...
248.00 EUR
store
local_shipping
INFO
Rycote
5cm Classic-Softie Kit (24/25) [033313]
The 5cm Large Hole Classic-Softie Kit from Rycote features a Softie Windshield, a Lyre...
248.00 EUR
store
local_shipping
INFO
Rycote
5cm SGM Foam & Windjammer (19/22 [055201]
The Shotgun Mic Foam and Windjammer Combo from Rycote is a slip on wind solution for sh...
69.00 EUR
store
local_shipping
Rycote
5cm SGM Foam & Windjammer (24/25)
The Shotgun Mic Foam and Windjammer Combo from Rycote is a slip on wind solution for sh...
69.00 EUR
store
local_shipping
INFO
Rycote
5cm SGM Foam (19/22) (10 Pack)
The Rycote 104406 5cm Standard Hole SGM Foam (10-Pack) is ideal for protecting your sho...
119.00 EUR
store
local_shipping
INFO
Rycote
5cm SGM Foam (19/22) (Single) [104406]
The Rycote 104406 5cm Standard Hole SGM Foam is ideal for protecting your shotgun micro...
14.00 EUR
store
local_shipping
Rycote
5cm SGM Foam (24/25) (10 Pack)
The Rycote 104407 5cm Large Hole SGM Foam (10-Pack) is ideal for protecting your shotgu...
119.00 EUR
store
local_shipping
INFO
Rycote
5cm SGM Foam (24/25) (Single)
The Rycote 104407 5cm Large Hole SGM Foam is ideal for protecting your shotgun micropho...
13.00 EUR
store
local_shipping
Rycote
5cm SGM Windjammer
SGM Windjammer 5cm, Suitable for 5cm SGM Foam
49.00 EUR
store
local_shipping
Rycote
5cm Super-Softie (19/22) [033205]
Super-Softie® The Super Softie® is a completely new approach to the slip-...
156.00 EUR
store
local_shipping
INFO
Rycote
5cm Super-Softie (24/25) [033206]
5cm Super-Softie (24/25) Wind Shield for Shotgun Mics...
156.00 EUR
store
local_shipping
DPA
6060/61/66 Makeup Cover, Orange, 5 pcs.
6060/61/66 Makeup Cover, Orange, 5 pcs...
14.00 EUR
store
local_shipping
INFO
DPA
6066 CORE Omni Subminiature Mic Boom Brown
Omni Mic Boom
817.00 EUR
store
local_shipping
INFO
Universal Audio
710 Twin-Finity Mic Pre & D.I.
The 710 Twin-Finity™ is a radically new UA pre-amp design which uniquely combines...
918.00 EUR
store
local_shipping
INFO
Rycote
7CM Classic-Softie (19/2
For Sanken CS-M1 MicrophoneWorks with Rode VideoMic NTGFits 1.9 to 2.2cm Mi...
129.00 EUR
store
local_shipping
INFO
DPA
8-way Clip for 6060 Subminiature series, Black
When used as a lavalier, a special rotatable clip is available. The 360° clip allow...
31.00 EUR
store
local_shipping
INFO
König & Meyer
85035 Microphone clip
Tapered slip-in microphone clip, diameter 17-21 mm, high quality elastic rubber...
6.00 EUR
store
local_shipping
König & Meyer
85050 Microphone Clip
Microphone clip diameter: 22-28 mm.Elastic mic support.Threaded connector ,...
6.00 EUR
store
local_shipping
König & Meyer
85055 Microphone Clip
Microphone clip diameter: 28-34 mm.Elastic mic support.Threaded connector ,...
4.50 EUR
store
local_shipping
König & Meyer
85060 Microphone Clip
Microphone clip diameter: 38-40 mm.Elastic mic support.Threaded connector ,...
6.00 EUR
store
local_shipping
König & Meyer
85070
The microphone clip is made from an elastic, high quality plastic material which holds...
7.00 EUR
store
local_shipping
Quik Lok
A-107
Add extra microphones without more stands congestions. Perfect for micing saxophones, drums, acoustic guitars, etc. 76,2 cm, 0.72 kg.
24.00 EUR
store
local_shipping
Quik Lok
A-114 Chrome
Short microphone stand, tabletop, triangular base, chrome.
44.00 EUR
store
local_shipping
INFO
Quik Lok
A-114 Mic Triangle Base
Short microphone stand, tabletop, triangular base, black.
42.00 EUR
store
local_shipping
Quik Lok
A-156 Microphone Boom
Clamp-on Thread Telescopic Mic Boom Arm allows you to achieve a true acoustic sound by avoiding the clutter of mic stands around your piano.
61.00 EUR
store
local_shipping
Quik Lok
A-188 Rubber Mic Holder
Desk tripod microphone stand with rubber mic holder, 11-17 cm, fot 19 cm, 335 g.
29.00 EUR
store
local_shipping
Quik Lok
A-25 Microphone Desk Arm
Microphone Desk Arm for studios and multi-media workstations. The flexible yet steady microphone desk arm comes with mic threaded adapter and microphone cable.
117.00 EUR
store
local_shipping
Quik Lok
A-26
Professional microphone desk arm developed for musicians, streamers and podcasters. Comes with table clamp and microphone cable.
179.00 EUR
store
local_shipping
INFO
Quik Lok
A-302
One of the most sold microphone-stands with boom. Tripod legs. Height 95.9-157.5 cm, boom 76.2 cm, weight 1.9 kg.
44.00 EUR
store
local_shipping
Quik Lok
A-302 BK EU-BB
One of the most sold microphone-stands with boom. Tripod legs. Height 95.9-157.5 cm, boom 76.2 cm, weight 1.9 kg. Delivered in brown box.
35.00 EUR
store
local_shipping
INFO
Quik Lok
A-304
Popular micstand with adjustable boom. Tripod legs. Height 95.9-157.5 cm, boom 55.9-101.6 cm, weight 1.65 kg.
55.00 EUR
store
local_shipping
Quik Lok
A-305
Short, Tripod with Fixed Length Boom. Height 52.1 - 76.8 cm, boom 76.2 cm, 1.4 kg.
45.00 EUR
store
local_shipping
Quik Lok
A-306
Short tripod microphone stand with telescopic boom Height 41.9 - 48.9 cm, boom 55.9 - 101.6 cm, weight 1.3 kg.
46.00 EUR
store
local_shipping
Quik Lok
A-344
Straight microphonestand, tripod legs, 94.6-158.8 cm, 82 cm folded, 1.5 kg, black.
34.00 EUR
store
local_shipping
Quik Lok
A-386 BK EU
Add-on telescopic boom with steel boom swivel, for 300 Series mic stands. 55.9-101.6 cm.
22.00 EUR
store
local_shipping
INFO
Quik Lok
A-399 Mic Stand
Straight microphone stand with round base, 90.2-156.2 cm, 24.75 cm fot, 3.8 kg.
58.00 EUR
store
local_shipping
Quik Lok
A-492 Mic Stand
Microphone stand with boom, tripod legs, 100-176 cm, 80 cm boom, 95.3 cm folded, 2.45 kg.
65.00 EUR
store
local_shipping
Quik Lok
A-494 Mic Stand
Microphone stand with adjustable boom, tripod legs, 100-176 cm, boom 53-91 cm, 95.3 cm folded, 2.6 kg.
65.00 EUR
store
local_shipping
Quik Lok
A-495
Short microphone stand with telescopic boom and round base, 38-58 cm, boom 53-91 cm, 55 cm folded, 24.75 cm base, 3.5 kg.
80.00 EUR
store
local_shipping
Quik Lok
A-496 Mic Stand
Short mic stand featuring cast-alloy tripod base and telescopic mic boom with metal boom swivel. 52.1-76.8 cm, boom 53-91 cm, 76cm folded, 2.1 kg.
61.00 EUR
store
local_shipping
Quik Lok
Välkmüük
A-50
Perfect stand for any recording, broadcast or live show application. 136-232.5 cm, boom 118-221 cm, 136.7 cm folded, 12.2 kg.
169.00 EUR 227.00 EUR
store
local_shipping
Quik Lok
A-512
Professional microphone stand featuring heavy-duty cast-alloy tripod base and fixed length mic boom with metal boom swivel. 100-176 cm, boom 80 cm, 95.3 cm folded, 3.7 kg.
97.00 EUR
store
local_shipping
INFO
Quik Lok
A-514
Professional microphone stand featuring heavy-duty cast-alloy tripod base and telescopic mic boom with metal boom swivel. 100-176 cm, boom 53-91 cm, 95.3 cm folded, 3.85 kg.
99.00 EUR
store
local_shipping
Quik Lok
A-516
Short professional microphone stand featuring heavy-duty castalloy tripod base and telescopic mic boom with metal boom swivel. 52.1-76.8 cm, boom 53.91 cm, 76 cm folded, 3.7 kg.
99.00 EUR
store
local_shipping
Quik Lok
Välkmüük
A-85
Height adjustable studio boom stand with tripod leg design provides steady, stable base for holding all kinds of studio microphones. 150-236 cm, 114-194 boom, 140 cm folded, 7.15 kg.
145.00 EUR 179.00 EUR
store
local_shipping
Quik Lok
A-988
Microphone stand, straight, one-hand clutch height adjustment mechanism, round base. 104-156.6 cm, 24.8 cm baseplate, 4.8 kg.
75.00 EUR
store
local_shipping
Quik Lok
A-989
Microphone stand with boom, tripod, one-hand clutch height adjustment mechanism, 104-156,5 cm, 2.1 kg.
99.00 EUR
store
local_shipping
Shure
A100WS
Foam Windscreen for KSM141 and KSM137 Microphones...
14.00 EUR
store
local_shipping
Shure
A12
The Shure A12 is a microphone stand, mounting flange designed for flush-mounting into d...
15.00 EUR
store
local_shipping
INFO
Shure
A120S
The Shure A120S In-Line On/Off Switch is an in-line, balanced, locking or momentary swi...
44.00 EUR
store
local_shipping
INFO
Shure
A13HD
The Shure A13HD is a heavy-duty microphone stand, mounting flange designed for flush-mo...
18.00 EUR
store
local_shipping
INFO
Shure
A13HDB mounting flange
Heavy-duty mounting flange available in black. The A13HD is a heavy-duty microp...
18.00 EUR
store
local_shipping
INFO
Shure
A15AS
The Shure A15AS is a switch selectable Microphone Attenuator which helps prevent amplif...
72.00 EUR
store
local_shipping
Shure
A15BT
Overview The Shure A15BT Bridging Transformer can be used to connect balanced and unbal...
80.00 EUR
store
local_shipping
Shure
A15HP
The Shure A15HP filter rolls off low audio frequencies to reduce 60Hz electrical hum, l...
84.00 EUR
store
local_shipping
Shure
A15LA
The Shure A15LA provides 50dB of attenuation, allowing a balanced line-level source to...
65.00 EUR
store
local_shipping
Shure
A15PRS
The Shure A15PRS reverses the phase (polarity) of a balanced audio signal. Typical use...
106.00 EUR
store
local_shipping
INFO
Shure
A15TG
The Shure A15TG Tone Generator is a battery-powered 700 Hz signal source used to troubl...
219.00 EUR
store
local_shipping
INFO
Shure
A181WS
The Shure A181WS is a foam windscreen for the Beta 181 condenser microphone...
19.00 EUR
store
local_shipping
Shure
A25D
Mic clip secures your handheld microphone to the mic stand safely while providing easy and positive angle adjustments. Works with Shure SM58, SM57, Beta 58A, 57A, 87A, 87C, or any mic with the same barrel size.
12.00 EUR
store
local_shipping
Shure
B-Stock
A25D [B-STOCK] 1 pcs left
B-STOCK] - Used, but in new condition. Sold in existing condition.
4.00 EUR 11.00 EUR
store
local_shipping
Shure
A25E
The Shure A25E Stand Adapter is a microphone stand adapter for the Shure KSM9 handheld...
21.00 EUR
store
local_shipping
Shure
A26M
Allows two Shure SM57, Beta 57A, or 545 Series microphones to be placed vertically on a...
123.00 EUR
store
local_shipping
Shure
A26X
The Shure A26X 3-Inch Extension Tube for Desk Stands provides additional heig...
15.00 EUR
store
local_shipping
Shure
A27M
The Shure A27M allows two microphones to be positioned onto a single microphone stand f...
146.00 EUR
store
local_shipping
INFO
Shure
A27SM
Elastic-suspension shock mount provides secure mounting and sound isolation when used with PG27, PGA27, SM27, Beta 27, and KSM27 Microphones.
119.00 EUR
store
local_shipping
INFO
Shure
A2WS-GRA Locking mic Windscreen for SM57 gray
Use the Shure Model A2WS Windscreens to attenuate unwanted breath and wind noise in clo...
25.00 EUR
store
local_shipping
Shure
A2WSBK
Shure A2WSBK Black Windscreen (for SM57 and 545)...
25.00 EUR
store
local_shipping
Shure
A300M
Stand mount provides secure thread-lock mounting for KSM313/NE, KSM313, and KSM353/ED Microphones.
125.00 EUR
store
local_shipping
INFO
Shure
A32M
Shure Pro Audio outfits the music industry with purer sound. Their A32M Swivel Mount f/...
94.00 EUR
store
local_shipping
INFO
Shure
A32SM
Shure A32SM Suspension Shock Mount for KSM32 Models Details Shure A32SM Suspensio...
212.00 EUR
store
local_shipping
INFO
Shure
A32WS
Blak Foam Windscreen for PG27, PG42, SM27, BETA 27, KSM27, KSM32, KSM42 and KSM44...
19.00 EUR
store
local_shipping
INFO
Shure
A3WS
Shure microphone accessory model A3WS The Shure A3WS Windscreen is designed with...
21.00 EUR
store
local_shipping
Shure
A400SM
The Shure A400SM is a recessed surface mount for gooseneck and desk top microphones. Th...
37.00 EUR
store
local_shipping
INFO
Shure
A400SMXLR
The A400SMXLR packages the A400SM Shock Mount with the A400XLR Connector/Insert...
58.00 EUR
store
local_shipping
Shure
A412MWS
The Shure A412MWS Locking metal windscreen from Shure features aoustically transparent...
27.00 EUR
store
local_shipping
Shure
A42OR
Elastic bands replace elastic bands for the A42SM ShureLock Shock Mount used with the KSM42 Microphone.
14.00 EUR
store
local_shipping
Shure
A4WS
Foam Windscreen for 16A, 16L and VR116L Microphones...
15.00 EUR
store
local_shipping
INFO
Shure
A53M
The Shure A53M Shock Mount Microphone Clip reduces transmission of mechanical noise and...
58.00 EUR
store
local_shipping
Shure
A55M
Shock Stopper isolation mount reduces transmission of mechanical noise and vibration by...
38.00 EUR
store
local_shipping
Shure
A56D
Shure's innovative A56D Microphone Drum Mount sets a new standard for versatility. Comp...
65.00 EUR
store
local_shipping
Shure
A57AWS
Locking foam windscreen for Beta 57 and Beta 57A microphones...
17.00 EUR
store
local_shipping
Shure
A57F
The Shure A57F is a break-resistant plastic microphone clip that securely holds a varie...
15.00 EUR
store
local_shipping
Shure
A58WS Black
Black foam windscreen for all Shure Ball type microphones such as SM48, SM58, Beta 58A or 565SD.
10.00 EUR
store
local_shipping
Shure
A58WS Blue
Blue foam windscreen for all Shure Ball type microphones such as SM48, SM58, Beta 58A or 565SD.
10.00 EUR
store
local_shipping
Shure
A58WS Gray
Gray foam windscreen for all Shure Ball type microphones such as SM48, SM58, Beta 58A or 565SD.
10.00 EUR
store
local_shipping
Shure
A58WS Green
Green foam windscreen for all Shure Ball type microphones such as SM48, SM58, Beta 58A or 565SD.
10.00 EUR
store
local_shipping
Shure
A58WS Red
Red foam windscreen for all Shure Ball type microphones such as SM48, SM58, Beta 58A or 565SD.
10.00 EUR
store
local_shipping
INFO
Shure
A58WS Yellow
Yellow foam windscreen for all Shure Ball type microphones such as SM48, SM58, Beta 58A or 565SD.
10.00 EUR
store
local_shipping
INFO
Shure
A75M
Do you dread setting up for a large studio date or stage show, laboriously screwing cou...
125.00 EUR
store
local_shipping
Shure
A7WS
Large Close-Talk Windscreen for SM7, SM7A, and SM7B Microphones...
37.00 EUR
store
local_shipping
Shure
A81WS
A large, stylish foam windscreen that adds an extra dimension of clarity and professionalism to your sound. Designed to fit Shure SM81 and SM57 microphones.
55.00 EUR
store
local_shipping
Shure
A83FUR
Developed by Shure with Rycote®, the A83-FUR Windjammer® is a high-quality synt...
66.00 EUR
store
local_shipping
INFO
Shure
A83W
Replacement foam windscreen Compatibility: VP83 and VP83F LensHopper Exclus...
25.00 EUR
store
local_shipping
INFO
Shure
A85WS
Standard foam windscreen for SM85, SM87A, Beta 87A, Beta 87C and BG5.1 microphones...
17.00 EUR
store
local_shipping
Shure
A88SM
The Shure Model A88SM Microphone Isolation Mount is designed especially for use where e...
285.00 EUR
store
local_shipping
Shure
A89LM-BA
The Shure A89LM-BA Double Lyre Boom Adapter Mount is essentially a boompole shockmount...
224.00 EUR
store
local_shipping
INFO
Shure
A89M-CC
Mounts VP89 Medium & Small Mics Features Camera Clamp Adapter Patented...
208.00 EUR
store
local_shipping
INFO
Shure
A89M-PG
Developed by Shure with Rycote, adjustable handheld mount works with VP89S and VP89M En...
224.00 EUR
store
local_shipping
INFO
Shure
A89U
The Shure A89U Adapter is used to shorten the footprint of the three VP89L, VP89M and V...
257.00 EUR
store
local_shipping
Shure
A98D
The Shure A98D is a gooseneck type drum mount for the Shure SM98A and Beta 98 microphon...
104.00 EUR
store
local_shipping
Shure
A98KCS
Universal Horn Clamp for Shure SM98 Mics The Shure Model...
146.00 EUR
store
local_shipping
INFO
Shure
A99WS
Be Shure of your audio. Shure's high-performance Foam Mic Windscreen for Gooseneck Mics...
12.00 EUR
store
local_shipping
INFO
Sennheiser
AB 3700
Antenna booster, range: 470-866 MHz, active, 15 dB gain, BNC, 3/8" thread"
618.00 EUR
store
local_shipping
Sennheiser
AB 4-AW+
Inline antenna booster, +10 dB gain, BNC connectors, frequency range: AW+ (470 - 558 MHz)
243.00 EUR
store
local_shipping
Sennheiser
AB 4-BW
Inline antenna booster, +10 dB gain, BNC connectors, frequency range: BW (626 – 698 MHz)
243.00 EUR
store
local_shipping
Sennheiser
AB 4-DW
Inline antenna booster, +10 dB gain, BNC connectors, frequency range: DW (790 – 865 MHz)
243.00 EUR
store
local_shipping
Sennheiser
AB 4-GW
Inline antenna booster, +10 dB gain, BNC connectors, frequency range: GW (558 - 626 MHz)
242.00 EUR
store
local_shipping
Dinkum
ActionPod
ActionPod® is a clamping monopod that is genius in its simplicity, providing the qu...
35.00 EUR
store
local_shipping
INFO
Dinkum
ActionPod PRO
The Dinkum Systems ActionPod PRO (10") has a long arm and a large spring clamp, acco...
41.00 EUR
store
local_shipping
Dinkum
ActionPod Top 1/4" - 3/8"
Already own one of the Dinkum Systems® CINE™ or PRO™ lens shades?  ...
16.00 EUR
store
local_shipping
INFO
Sony
AD-KIT88B accessories kit for ECM-88
SONY AD-KIT88B ACCESSORY KIT For ECM-88 series microphones,...
337.00 EUR
store
local_shipping
INFO
Sony
AD-R44B Wind Screens Black
Black Foam Windscreen for Sony ECM-44.
150.00 EUR
store
local_shipping
INFO
Sony
AD-R66B wind screens Black
Windscreens for Sony ECM66 lavalier microphone, black, 12-pack.
150.00 EUR
store
local_shipping
INFO
Sony
AD-R77B Wind Screens Black
Metal windscreens are designed to fit the Sony ECM77 lavalier microphone. The set includes 6 windscreens case. Color, black.
150.00 EUR
store
local_shipping
Sony
AD-R88B Wind Screens Black
Windscreen kit that includes 12,replacement urethane windscreens for the Sony ECM88 lavalier microphone. Color black.
281.00 EUR
store
local_shipping
INFO
Sony
AD-RV1B2//K wind screens for ECM-V1BMP
For use with UWP Series models including UWP-V1, UWP-V6, UTX-B2V and ECM-V1BMP, 5 piece...
64.00 EUR
store
local_shipping
INFO
Sony
AD-RX7B wind screens for ECM-X7BMP
The Sony ADRX7B Windscreens will protect your ECM-X7BMP and UWP series lavalier microph...
50.00 EUR
store
local_shipping
DPA
Adapter: Audio-Technica
Adapter for Audio-Technica ATW-T3201, ATW-T5201, ATW-T6001S (DAD6040)
161.00 EUR
store
local_shipping
INFO
Quik Lok
ADC-001
Camera adapter for microphone stands. 3/8" Female, 1/4" male
3.74 EUR
store
local_shipping
Dinkum
Additional Links 3/4" (5 Segments)
The Dinkum Systems Additional Links 3/4" (5 Segments) lengthens the ar...
10.00 EUR
store
local_shipping
INFO
DPA
ADH0002
The pack of 25 ADH0002 Double-Sided Tape from DPA Microph...
31.00 EUR
store
local_shipping
INFO
DPA
ADH0002-500
The pack of 500 ADH0002 Double-Sided Tape fromDPA Microphones...
412.00 EUR
store
local_shipping
INFO
DPA
ADH0005
Versatile self-adhesive mounting tape, originally made as toupee tape. Store tape away...
46.00 EUR
store
local_shipping
INFO
DPA
Adjustable Headset Mount for MMB4066/67/88 Beige Large
Adjustable Headband Mount
165.00 EUR
store
local_shipping
INFO
DPA
Adjustable Headset Mount for MMB4066/88 Beige
Adjustable Headband Mount
165.00 EUR
store
local_shipping
INFO
DPA
Adjustable Headset Mount for MMB4066/88 Beige Small
Adjustable Headband Mount
165.00 EUR
store
local_shipping
INFO
DPA
Adjustable Headset Mount for MMB4066/88 Black
Adjustable Headband Mount
165.00 EUR
store
local_shipping
INFO
DPA
Adjustable Headset Mount for MMB4066/88 Black Large
Adjustable Headband Mount
165.00 EUR
store
local_shipping
INFO
DPA
Adjustable Headset Mount for MMB4066/88 Black Small
Adjustable Headband Mount
165.00 EUR
store
local_shipping
INFO
TritonAudio
AirHead
Attenuator for all types of microphonesPassive -15dB attenuatorFor all type...
51.00 EUR
store
local_shipping
Shure
AMV5-DS
Shure AMV5-DS MV5 Desk Stand...
21.00 EUR
store
local_shipping
Shure
AMV88-CC
Carrying case holds and protects 1 MV88 Microphone. ...
21.00 EUR
store
local_shipping
Shure
AMV88-FUR
Shure AMV88-FUR MV88 Rycote Deadcat...
52.00 EUR
store
local_shipping
Shure
AMV88-WS
Shure AMV88-WS MV88 Foam Windscreen...
21.00 EUR
store
local_shipping
Shure
AMVL-BAG
AMVL-BAG DRAWSTRING CARRYING POUCH FOR MVL...
17.00 EUR
store
local_shipping
Shure
AMVL-CLIP
Metal Tie Mount...
3.74 EUR
store
local_shipping
Shure
AMVL-FUR
Rycote® Windjammer® for MVL. ...
35.00 EUR
store
local_shipping
Shure
AMVL-WS
Replacement Foam Windscreen...
3.74 EUR
store
local_shipping
Omnitronic
Kampaaniad
ANV-1 Microphone Stand Black
• Anti-vibration microphone stand with 6.5 cm padding • Standard 16 mm...
32.00 EUR 65.00 EUR
store
local_shipping
Omnitronic
AP-1 Microphone Stand black
Rugged constructionAdded stabilityFully shock absorbingBoom arm adjus...
42.00 EUR
store
local_shipping
RTX
AP01
RTX accessories microphone filter antipop to clamp diameter 16 cm...
31.00 EUR
store
local_shipping
Proel
AP122
3/8" - 5/8" universal adapter.
1.98 EUR
store
local_shipping
DPA
APE30RS
64.00 EUR
store
local_shipping
INFO
DPA
APE40RS
Acoustic Pressure Equalizer, 40mm Ball
64.00 EUR
store
local_shipping
INFO
DPA
APE50RS
64.00 EUR
store
local_shipping
INFO
Proel
APM215
Professional shock mount holder for microphones 22-24mm, 5/8" thread.
26.00 EUR
store
local_shipping
Proel
APM225
Professional shock mount holder for microphones 44-48mm, 5/8" thread.
26.00 EUR
store
local_shipping
Proel
APM40
5/8' - 3/8' universal screw link for microphone stands.
1.98 EUR
store
local_shipping
Proel
APM65
Additional metal bracket for microphone stand, equipped with 5/8” thread and 30 cm length gooseneck. Matt black finish.
22.00 EUR
store
local_shipping
Proel
APOP30 Pop Filter
Mini curved pop-filter in metal, with 29 cm length adjustable gooseneck. Equipped with universal clamp for pipes up to 25 mm in diameter. Black colour.
25.00 EUR
store
local_shipping
Proel
APOP35
Dual layer nylon screen pop filter, equipped with 34 cm length adjustable gooseneck. Filter diameter 155 mm. Equipped with universal clamp for pipes up to 25 mm in diameter. Black colour.
18.00 EUR
store
local_shipping
Proel
APOP40
Metal screen mini pop filter, equipped with adjustable gooseneck and universal mounting plate for straight microphone stands
32.00 EUR
store
local_shipping
Proel
APOP50
Anti-sibilant flexible nylon screen pop filter, equipped with gooseneck and adjustable with universal fastening screw for straight stands.
35.00 EUR
store
local_shipping
Proel
APOP65
Dual layer nylon screen pop filter, equipped with 32 cm length adjustable gooseneck. Filter diameter 155 mm. Equipped with universal clamp for pipes from 17 up to 30 mm in diameter
41.00 EUR
store
local_shipping
Audix
APS-2
Audix APS2 Two Channel 48V Phantom Power Supply
134.00 EUR
store
local_shipping
Audix
APS-910
For electret microphonesMini-XLR 3-pin on XLR-maleSuit...
49.00 EUR
store
local_shipping
INFO
ART
ART Tube MP/C
The ART Tube MP/C rocks.
188.00 EUR
store
local_shipping
Omnitronic
Kampaaniad
AS-01 Microphone Absorber System
•Portable absorber/diffusor for studio and live applications •Reduces u...
129.00 EUR 141.00 EUR
store
local_shipping
Omnitronic
Kampaaniad
AS-03
Microphone Absorber System, foldable. 5/8 inch thread, 5/8 inch thread, Width 39,5 cm, Depth 15 cm, Height 36 cm, Weight 1,50 kg
75.00 EUR 95.00 EUR
store
local_shipping
Omnitronic
Kampaaniad
AS-04
Desk-Microphone-Absorber System, foldable incl. tripod. 5/8 inch thread, Width 21 cm, Depth 20 cm, Height 38 cm, Weight 800 g
65.00 EUR 85.00 EUR
store
local_shipping
Audient
ASP800
8-channel microphone preamp including the AD conversion, HMX and IRON.ASP800 is a...
693.00 EUR
store
local_shipping
Audient
ASP880
The Audient ASP880 is an eight-channel microphone preamp/ADC that delivers transparent,...
1050.00 EUR
store
local_shipping
Audio-Technica
AT4049B EL
Omnidirectionel head capsule for AT4900b-48 electronic body.
239.00 EUR
store
local_shipping
INFO
Audio-Technica
AT8109A
Foam windscreen with light pipe for ES925 cardioid, hypercardioid and omnidirectional elements black.
20.00 EUR
store
local_shipping
Audio-Technica
AT8123
Windscreen for Audio-Techica Pro24Cm W/S
14.00 EUR
store
local_shipping
INFO
Audio-Technica
AT8138A
Foam windscreen with light pipe for ES925 MicroLine® element (black).
25.00 EUR
store
local_shipping
Audio-Technica
AT8153
Two-stage foam windscreen, black, for U853/857.
17.00 EUR
store
local_shipping
Audio-Technica
AT8153WH
Two-stage foam windscreen, white, for U853/857.
29.00 EUR
store
local_shipping
Audio-Technica
AT8472
Slip-in mic clamp for PRO24 or any 21 mm body diameter microphone with camera shoe mount.
43.00 EUR
store
local_shipping
INFO
Audio-Technica
AT8482
Shock mount bracket for AT5040 with elastic suspension
337.00 EUR
store
local_shipping
INFO
Audio-Technica
AT8484
Shock mount for Audio-Technica BP40
130.00 EUR
store
local_shipping
INFO
Audio-Technica
AT8490
Unimount gooseneck stand for ATM350
39.00 EUR
store
local_shipping
INFO
Audio-Technica
AT8490L
Unimount gooseneck stand for ATM350, long
50.00 EUR
store
local_shipping
INFO
Audio-Technica
AT8491D
Unimount bracket, drums, ATM350
85.00 EUR
store
local_shipping
INFO
Audio-Technica
AT8491P
Unimount bracket, magnet, piano, ATM350
73.00 EUR
store
local_shipping
INFO
Audio-Technica
AT8491U
Unimount unversial clip-on mount for AT8490/L, ATM350
62.00 EUR
store
local_shipping
INFO
Audio-Technica
AT8491W
Unimount bracket for woodwinds
85.00 EUR
store
local_shipping
INFO
Audio-Technica
AT8537
Power Module for AT898, AT899 microphones.
269.00 EUR
store
local_shipping
INFO
Audio-Technica
ATDM-0604A
SmartMixer, 6 mic/line in, 4 out, AEC, USB I/O, AT-link, Web config
1216.00 EUR
store
local_shipping
Audio-Technica
ATDM-1012
SmartMixer, 10 mic/line in, 8 out, AEC, USB I/O, AT-link, Web config
2298.00 EUR
store
local_shipping
Audio-Technica
ATDM-1012DAN
SmartMixer, 10 mic/line in, 8 out, AEC, USB I/O, Dante, Web config
3110.00 EUR
store
local_shipping
Rycote
Audio Kit - Olympus LS-100
Suitable for olympus ls-100 digital portable recorder Ideal for blog, interview o...
174.00 EUR
store
local_shipping
INFO
Rycote
Audio Kit - Sony PCM-D100 [046024]
Suitable for sony pcm d100 digital portable recorder Ideal for blog, interview or...
174.00 EUR
store
local_shipping
Marantz
Audio Scope Gear
Kit of accessories perfect for the gig bag. The kit contains five different mounting options for DSLR cameras (and other devices with hot-shoe mounts).
41.00 EUR
store
local_shipping
Black Lion Audio
Auteur MK2 500
Max Microphone Input Level: +1dBuInput Impedance: 6000ΩPad: 13dBu...
• Eliminates wind noise • Isolates from shock and vibration...
138.00 EUR
store
local_shipping
AKG
C5WL-1
Microphone head that provides a gold plated transducer case to protect the capsule from corrosion and humidity. It is designed to fit the HT4500 handheld transmitter.
235.00 EUR
store
local_shipping
INFO
Audix
CA4231
1/2" Machined Calibration Adapter for TM1 Microphone...
51.00 EUR
store
local_shipping
INFO
Audix
CAB-GRAB1
An innovative micing solution for guitar amps and cabinets Allows for...
59.00 EUR
store
local_shipping
Audix
CAB-GRABXL
Audix CabGrabber XL Microphone Clip for Guitar Amps/Cabinets Features at a Glan...
69.00 EUR
store
local_shipping
Sennheiser
CABLE-II-6
Straight copper cable with coiled segment to eliminate structure born noise. Unterminated end, 1.85 m. Compatible with the HMD 300 PRO, HMD 301 PRO, HMD/HME 26-II and the HMD/HME 27 PRO
81.00 EUR
store
local_shipping
Cranborne Audio
CAMDEN EC1
661.00 EUR
store
local_shipping
INFO
Cranborne Audio
Camden EC2
1269.00 EUR
store
local_shipping
Cranborne Audio
CAMDEN500
438.00 EUR
store
local_shipping
Rycote
Camera Mic Clamp / Hot Shoe Adaptor
This Rycote CC-Hotshoe Camera Clamp Adapter allows standard shoe-mountable items to be...
20.00 EUR
store
local_shipping
INFO
Dinkum
Cantilever Clamp
The Dinkum Systems Cantilever Clamp Base for Dinkum Arms attaches to D...
47.00 EUR
store
local_shipping
Audix
CAPS ASSEMBLY OM2 FOR HANDHELD TRANS
Modular capsule adapter with the OM2 dynamic VLM capsule. For use with the H60 wireless...
150.00 EUR
store
local_shipping
INFO
Audix
CAPS ASSEMBLY OM5 FOR H60 TRANS
Microphone Capsule Assembly for H60 Transmitter...
187.00 EUR
store
local_shipping
INFO
Audix
CAPS ASSEMBLY VX5 FOR H60 TRANS
Microphone Capsule Assembly for H60 Transmitter...
339.00 EUR
store
local_shipping
INFO
Audix
CBL GUITAR 3 FT MINI XLR-1/4" R4XR6X
Guitar Cable for Wireless Bodypack Transmitters (30")...
25.00 EUR
store
local_shipping
INFO
Audix
CBLM3100
M3 Interface cable, Cat7, RJ45, 100m bulk, plenum
621.00 EUR
store
local_shipping
INFO
Audix
CBLM3300
M3 Interface cable, Cat7, RJ45, 300m bulk, plenum
1753.00 EUR
store
local_shipping
INFO
DPA
CC4099
DPA CC4099 Mounting Clip DetailsThe DPA Microphones Mounting Clip is designed to...
45.00 EUR
store
local_shipping
INFO
DPA
CC4099X
Clip to connect a DPA 4099 Instrument Microphone to a Cello, 10-pack.
2-compartment charger for SL TABLESTAND and interfaces, inductive, Qi standard, including power supply
349.00 EUR
store
local_shipping
Sennheiser
CHG 4N EU
4-compartment charger for SL HANDHELD and SL BODYPACK, network-compatible IPv4/6, including power supply
702.00 EUR
store
local_shipping
Sennheiser
CHG 70N-C
Network enabled charger featuring two individual charging bays (compatible with EW-DX SKM, SK or BA 70). Includes CHG 70N-C, quick guide and safety guide.
338.00 EUR
store
local_shipping
Sennheiser
CHG 70N-C + PSU kit
Network enabled charger featuring two individual charging bays and external power supply unit (compatible with EW-DX SKM, SK or BA 70). Includes CHG 70N-C, power supply unit, quick guide, safety guide.
395.00 EUR
store
local_shipping
Dinkum
CINE Lens Shade Clamp Mount
The professional cameraman’s favorite choice for over 15 years, the Dinkum System...
75.00 EUR
store
local_shipping
INFO
AKG
CK 31
The cardioid is the most popular polar pattern since it can be used almost universally...
117.00 EUR
store
local_shipping
AKG
CK 33
Due to the narrow 95° pickup angle, the hypercardioid polar pattern is a good choic...
245.00 EUR
store
local_shipping
AKG
CK 61-ULS
High quality cardioid capsule with exceptionally flat on-axis frequency response...
314.00 EUR
store
local_shipping
AKG
CK 62-ULS
High quality omnidirectional capsule with exceptionally flat on-axis frequency response...
339.00 EUR
store
local_shipping
INFO
AKG
CK 63-ULS
High quality hypercardioid capsule with exceptionally flat on-axis frequency response
339.00 EUR
store
local_shipping
INFO
AKG
CK 80
An 80° pickup angle and speech optimized frequency response provide excellent intel...
76.00 EUR
store
local_shipping
INFO
AKG
CK 93
high-performance small condenser capsule with a smooth and well-balanced frequency response (20 Hz - 20 kHz) and a distinct hypercardioid polar pattern.
227.00 EUR
store
local_shipping
INFO
AKG
CK 98
Short shotgun for use in noisy environments. It offers excellent reach, thanks to a very tight polar pattern and exceptionally low self noise
502.00 EUR
store
local_shipping
INFO
AKG
CK41
EXECUTIVE MODULARITYfor use in theatres, houses of worship and conference rooms...
251.00 EUR
store
local_shipping
Cloud Microphones
Kampaaniad
CL-2 Cloudlifter
A Must-Have Tool for Dynamics and Ribbons! Cloudlifter CL-2 Mic Activator ...
248.00 EUR 448.00 EUR
store
local_shipping
DPA
CLAMP MOUNT FOR d:vote™ 4099 INSTRUMENT MICROPHONES (CM4099)
Clamp mount to easily and quickly connect a d:vote™ 4099 Instrument Micropho...
45.00 EUR
store
local_shipping
INFO
Quik Lok
CLAMP-001
Adapter clamp that allows you to use all the Quik Lok accessories of the QLX series on multiple surfaces.
Mic Clip for L5 Microphone, Rubber, Holds 3 Lavalier Microphone...
44.00 EUR
store
local_shipping
INFO
Audix
CLIP MIC TIE CLIP ALLIGATOR STYLE PROVIDED ACCESSORY
The Audix MCL5 Alligator Style Tie Clip is specially designed for L5 Microphone.
15.00 EUR
store
local_shipping
Røde
Clip-2 for Lavalier/3pack
The LAV-CLIP is an ergonomic and discreet clip mount for the R DE Lavalier microphone.T...
44.00 EUR
store
local_shipping
Røde
Colors 3
4 colored puff covers, cable identification rings, identification tags and stickers, Compatible with Wireless GO II, Wireless GO and Lavalier II
30.00 EUR
store
local_shipping
Dinkum
COMPACT Lens Shade
The COMPACT™ lens shade is a professional “french flag” for DSLR&rsqu...
33.00 EUR
store
local_shipping
Rycote
Connbox CB1 (XLR-3F) [016901]
The Rycote ConnBox microphone cable connector boxes are designed to mount on the Rycote...
92.00 EUR
store
local_shipping
DPA
CSM4000
The DPA Compact Microphone Shock Mount is a shock mount designed for u...
192.00 EUR
store
local_shipping
INFO
Sony
CU-C31 Condenser capsule
Condenser cardioid Mic Capsule for use with DWM-02 and DWZ series handheld transmitters...
1310.00 EUR
store
local_shipping
INFO
Sony
CU-F31 Dynamic capsule
Designed for vocal applications including live music performance, the CU-F31 is a dynam...
1029.00 EUR
store
local_shipping
INFO
Sony
CU-F32 Dynamic capsule
Designed for presentation applications, the CU-F32 is a dynamic wide-cardiod mic capsul...
524.00 EUR
store
local_shipping
INFO
JTS
CX-516W Fäste
Mic holder CX-516W...
10.00 EUR
store
local_shipping
DPA
CXO4000
Get the sound you want, by having the right microphone mount and the right mics. ...
192.00 EUR
store
local_shipping
INFO
Rycote
Kampaaniad
Cyclone Cable XLR-3M - XLR-3F 260mm [042277]
Cable Length 9.9' / 3 mShielding Not Specified by ManufacturerJacket Type N...
83.00 EUR 92.00 EUR
store
local_shipping
Rycote
Cyclone Windjammer, Large
The Cyclone Windjammer Rycote is designed to be fitted over a Cyclone Windshield, and i...
230.00 EUR
store
local_shipping
INFO
Rycote
Cyclone Windjammer, Medium [029102]
The Windjammer first introduced by Rycote is a high quality synthetic fur-cover, which...
230.00 EUR
store
local_shipping
Rycote
Cyclone Windjammer, Small [029103]
The Windjammer first introduced by Rycote is a high quality synthetic fur-cover, which...
230.00 EUR
store
local_shipping
Rycote
Cyclone Windshield Kit Large [089101]
Ideal for a multitude of outdoor ENG, broadcast, and film applications, the Cyclone Win...
873.00 EUR
store
local_shipping
INFO
Rycote
Cyclone Windshield Kit, Medium [089102]
The Cyclone features a durable, lightweight design, category leading wind and shock iso...
873.00 EUR
store
local_shipping
Rycote
Cyclone Windshield KIT, S
The Cyclone Windshield Kit Small is suitable for shotgun microphones such as...
1102.00 EUR
store
local_shipping
INFO
Rycote
Cyclone Windshield Kit, Small [089103]
The Cyclone features a durable, lightweight design, category leading wind and shock iso...
873.00 EUR
store
local_shipping
LD Systems
D 1015 CMB
The D1015CMB metal base ensures secure positioning of gooseneck microphones and offers...
70.00 EUR
store
local_shipping
Adam Hall
D 800 Adapter 5/8" to 3/8"
Thread adapter for mic holder 5/8" to 3/8" chrome plated.
2.91 EUR
store
local_shipping
Adam Hall
D 801 Adapter 3/8" to 5/8"
Thread adapter for mic holder 3/8" to 5/8" chrome plated.
6.00 EUR
store
local_shipping
LD Systems
D 902
Large microphone clamp with rubber-like clamp. Variable fit. The microphone can be easily removed with one hand. For wireless microphones. 3/8" and 5/8" thread.
7.00 EUR
store
local_shipping
LD Systems
D 903
Microphone Holder, black with rubberised flexible top to fit most microphones, Quick re...
9.00 EUR
store
local_shipping
LD Systems
D 905
Pro Stage rubberised microphone holder for Radio microphones with new fins for perfect...
11.00 EUR
store
local_shipping
LD Systems
D 909
Windscreen for Microphone black ...
4.73 EUR
store
local_shipping
LD Systems
D 910
Pop Filter...
43.00 EUR
store
local_shipping
LD Systems
D 913 BLK
LD microphone windscreen, Ø 40 mm – 50 mm, available in black, red,yellow,...
4.82 EUR
store
local_shipping
Adam Hall
D 921
Gooseneck mounting plate with 3/8" thread to attach microphone goosenecks. Chrome.
10.00 EUR
store
local_shipping
Adam Hall
D 921 BLK
Gooseneck mounting plate with 3/8" thread to attach microphone goosenecks. Black.
10.00 EUR
store
local_shipping
Audix
D-CLAMP
DCLAMP Flexible mini-gooseneck with drum tension lug clamp for D2, D4...
30.00 EUR
store
local_shipping
INFO
Audix
D-CLIP
Microphone clip mounts to standard 5/8" threads and also includes a 3/8" thread adapter for European microphone stands.
15.00 EUR
store
local_shipping
Audix
D-FLEX
Dual pivot rim mounted clip with extra wide butterfly jaws. Attaches firmly to drum rim...
20.00 EUR
store
local_shipping
INFO
Røde
D-Powerplug
The D-PowerPlug is effectively a 'Turbo Charger' for Dynamic microphones! Features an i...
110.00 EUR
store
local_shipping
Audix
D-VICE
Flexible mini-gooseneck with spring loaded rim mount clamp. Includes DCLIP plastic clip...
34.00 EUR
store
local_shipping
INFO
DAP Audio
D1701 Mic holder 44-48mm anti-shock black
Microphone holder 44-48 mm, shock mount, shock-absorbing, black.
36.00 EUR
store
local_shipping
DAP Audio
D1702 Mic holder 44-48mm anti-shock grey
Microphone holder 44-48 mm, shock mount, shock-absorbing, grey.
36.00 EUR
store
local_shipping
DAP Audio
D1703 Mic holder 22-24mm anti-shock black
Shockmount, microphone holder 22-24 mm, 5/8’ thread, black
39.00 EUR
store
local_shipping
DAP Audio
D1704 Mic holder 22-24mm anti-shock grey
Shockmount, microphone holder 22-24 mm, 5/8’ thread, grey
36.00 EUR
store
local_shipping
DAP Audio
D1750 Nylon pop filter
Pop filter, nylon, 165 mm diameter, 345 mm gooseneck, a must-have for your recordings.
32.00 EUR
store
local_shipping
DAP Audio
D1751 Metal pop filter
Pop filter, 135 mm diameter, gooseneck 310 mm, minimizes unwanted S-sounds and pop sounds. A must-have for your recordings.
30.00 EUR
store
local_shipping
AKG
D5WL-1
CUTS THROUGH THE MIXfor lead and backing vocalsThe D5 professional dynamic...
174.00 EUR
store
local_shipping
INFO
AKG
D7WL-1
WIRELESS POWERSOUNDfor loud and demanding lead vocalsThe D7 WL1 reference d...
176.00 EUR
store
local_shipping
INFO
DAP Audio
Kampaaniad
D8110 Broadcasting Stand
Microphone stand, table arm, 1650–2200 mm, XLR microphone cable included, max. microphone weight 1.4 kg, weight 1.8 kg.
54.00 EUR 88.00 EUR
store
local_shipping
DAP Audio
D8202B Desk Mic-Stand Adjustable
Table microphone stand, metal, black, round base 130 mm, 230–370 mm, 5/8 and 3/8 thread, 1.1 kg.
33.00 EUR
store
local_shipping
DAP Audio
D8203C Desk Mic Stand
Bordsmikrofonstativ, svanhals krom, 350 mm, rund bas 158 mm, 5/8" gänga.
35.00 EUR
store
local_shipping
DAP Audio
D8204C Desk Mic Stand Boom
Table microphone stand with adjustable boom 330-570 mm, height 390-600 mm, black/chrome, 150 mm base plate, 3/8 thread, 2 kg.
53.00 EUR
store
local_shipping
DAP Audio
D8205C Mini Desk Mic Stand
Table microphone stand, mini, 135–170 mm, 3/8 thread, tripod legs, metal, chrome, 0.21 kg.
17.00 EUR
store
local_shipping
DAP Audio
D8206C Mini Desk Mic Stand
Bordsmikrofonstativ, mini, stativben, 146,5 mm, 5/8 gänga, metall, krom.
11.00 EUR
store
local_shipping
DAP Audio
D8207C Mini Desk Mic Stand
Bordsmikrofonstativ, mini, 89 mm, 5/8 gänga, stativben, metall, krom, 0,94 kg.
9.00 EUR
store
local_shipping
DAP Audio
D8901B Gooseneck 30 cm Black
Goosenec, 30 cm, black, screw.
8.00 EUR
store
local_shipping
DAP Audio
D8902B Gooseneck 40 cm Black
Gooseneck 40 cm screw. Black.
10.00 EUR
store
local_shipping
DAP Audio
D8911B Mounting Plate 60 mm Gooseneck
Mounting Plate 60 mm for Gooseneck. Black...
10.00 EUR
store
local_shipping
DAP Audio
D8911C Mounting Plate 60 mm Gooseneck
Mounting Plate 60 mm for Gooseneck. Chrome.
11.00 EUR
store
local_shipping
DAP Audio
D8940 Mic Holder 28mm
Microphone holder 28 mm, 5/8 thread, plastic, black.
7.00 EUR
store
local_shipping
DAP Audio
D8941 Mic Holder 22mm
Microphone holder for microphones with a maximum diameter of 22 mm
6.00 EUR
store
local_shipping
DAP Audio
D8942 Mic Holder 32mm flexible
Microphone holder 32 mm, flexible, 5/8 thread, plastic, black.
10.00 EUR
store
local_shipping
DAP Audio
D8943 Mic Holder 22mm flexible
Mikrofonhållare 22 mm, flexibel, 5/8 gänga, plast, svart.
7.00 EUR
store
local_shipping
DAP Audio
Välkmüük
D8945 Microphone Holder
Microphone holder 45 mm, shock mount, 42-45 mm, plastic, black.
17.00 EUR 36.00 EUR
store
local_shipping
DAP Audio
D8951 Thread Adapter 5/8 to 3/8
Thread Adapter, from 5/8 outer to 3/8 inner
7.00 EUR
store
local_shipping
DAP Audio
D8952 Thread Adapter 3/8 to 5/8 Inner
Thread Adapter, from 3/8 outer to 5/8 inner
7.00 EUR
store
local_shipping
DAP Audio
D8953 Thread Adapter 3/8 to 5/8
Thread Adapter from 5/8 outer to 3/8 inner
4.15 EUR
store
local_shipping
DAP Audio
D8961 Mic. T-bar for 2 mics
T-bar for 2 microphones, 5/8 thread, 205 mm.
21.00 EUR
store
local_shipping
DAP Audio
D8962 Mic. T-bar for 4 mics
T-bar for 4 microphones, 5/8 thread, 250 mm, chrome.
30.00 EUR
store
local_shipping
DAP Audio
D8963 Mic. Adapter clamp
Mikrofonadapterklämma för 1 mikrofon, 5/8 gänga, 148 mm, metall.
33.00 EUR
store
local_shipping
LD Systems
D914 Pop Filter
For all standard microphone stands, double nylon screen with sturdy black.Plastic frame...
45.00 EUR
store
local_shipping
DPA
d:facto Foam Protection
d:facto Foam Protection
18.00 EUR
store
local_shipping
INFO
DPA
d:facto II Supercardioid Vocal Microphone Capsule with SE2-ew Connecto
The black II Supercardioid Vocal Microphone Capsule with SE...
1184.00 EUR
store
local_shipping
INFO
DPA
d:facto Microphone Grid (Metal Only)
DPA Microphones Metal Mesh Grid for d:facto Microphone (Black)
140.00 EUR
store
local_shipping
INFO
DPA
d:facto Microphone Grid (Metal Only) Gold finish
DPA Microphones Metal Mesh Grid for d:facto Microphone (Gold)
DPA Microphones Metal Mesh Grid for d:facto Microphone (Nickel)
140.00 EUR
store
local_shipping
INFO
DPA
d:facto Pop Filter
replacement inner cylindrical pop filter
48.00 EUR
store
local_shipping
INFO
DPA
DAK4060
...
108.00 EUR
store
local_shipping
INFO
Røde
DC-USB1
27.00 EUR
store
local_shipping
DPA
DC4099
The DC4099 Mounting Clip from DPA Micropho...
45.00 EUR
store
local_shipping
INFO
DPA
DC4099X
PACK OF 10 The DC4099 Mounting Clip...
450.00 EUR
store
local_shipping
INFO
Adam Hall
DCAM 1
Microphone stand adapter for camera, camcorder, mobile audio recorder or any other compatible gear with a 1/4" thread. Can be mounted on all microphone stands with 5/8" thread.
17.00 EUR
store
local_shipping
DPA
DD0251
From DPA, this Nearfield Frequency Alterin...
109.00 EUR
store
local_shipping
INFO
DPA
DD0254
DD0254 is a grid for close-miking applicat...
109.00 EUR
store
local_shipping
INFO
DPA
DD0297
The DD0297 is a microphone protection grid...
126.00 EUR
store
local_shipping
INFO
DAP Audio
Kampaaniad
DDS-02 Acoustic diffuser screen
Acoustic absorber/diffuser screen, 455 x 300 mm, 1.8 kg.
129.00 EUR 226.00 EUR
store
local_shipping
Røde
Kampaaniad
Dead Cat
RODE DeadCat Wind Muff for VideoMic, NTG-1, NTG-2 & NTG-3: The addition of the Rode...
32.00 EUR 60.00 EUR
store
local_shipping
Røde
Kampaaniad
Dead Cat VMP
The DeadCat VMP is a furry wind cover for the VideoMic Pro, designed for use in windy e...
32.00 EUR 57.00 EUR
store
local_shipping
Røde
Dead Kitten
The Rode Dead Kitten is an excellent windscreen that's optimized for video applications...
39.00 EUR
store
local_shipping
Røde
Dead Wombat
This Rode DeadWombat Windshield is a windshield for the Rode Blimp windshield shock mou...
73.00 EUR
store
local_shipping
Røde
DeadCat GO
The Rode DeadCat GO is a furry wind cover for the VideoMic GO, designed for use indoors...
33.00 EUR
store
local_shipping
Røde
DeadCat VMP+ (plus)
The DeadCat VMP+ is a deluxe furry wind cover for the VideoMic Pro+, designed for use i...
73.00 EUR
store
local_shipping
Røde
DeadCat VMPR
The DeadCat VMPR Artificial Fur Wind Shield from Rode is a furry wind-cover for the Vid...
57.00 EUR
store
local_shipping
Røde
DeadMouse-Pin
The DeadMouse-Pin from Rode Microphones is a professional grade windshield, designed to...
46.00 EUR
store
local_shipping
Røde
Desk Clamp For PSA-1
Desk Clamp For Røde PSA-1
27.00 EUR
store
local_shipping
Hercules
DG107B Podcast Arm
The universal podcast mic & camera arm stand DG107B provides the best mounting opti...
59.00 EUR
store
local_shipping
Hercules
DG137B Multi Mount Holder
Multi mount for microphones and other devices. 85 x 70 x 205 mm, 380 g.
26.00 EUR
store
local_shipping
Lewitt
DGT 50 TRI
Sturdy foldable desk tripod.
36.00 EUR
store
local_shipping
INFO
ART
Digital MPA II
The ART Digital MPA-II - delivers all of the same great features of the ProMPA with the...
639.00 EUR
store
local_shipping
INFO
Rycote
Diy Kit (Mwj Fur, Lining & Velcro)
If your camcorder mic is one for which we cant supply an off the shelf fitting, or if y...
29.00 EUR
store
local_shipping
sE Electronics
DM1 Black
An ultra-slim active inline preamp that fits seamlessly between your mic and mic pre, providing a massive +28dB of clean, transparent gain for all your passive microphones
87.00 EUR
store
local_shipping
sE Electronics
DM1 Mic Pre
Some mics need a LOT of gain - and not all preamps are up to the challenge. The DM1 DYN...
87.00 EUR
store
local_shipping
sE Electronics
DM2 Black
Switchable inline preamp +15dB to +30dB, 8 load settings from 50 ohms to 10 mega ohms, Powering 48V Phantom, Black Finish.
103.00 EUR
store
local_shipping
sE Electronics
DM2 TNT
Active micpreamp, choose between a moderate +15dB or explosive +30dB of gain, 10 Hz - 120,000 Hz, 135 Ohms, 80 g
Provides 12dB Max Wind-Noise Attenuation Reduces Mic Noise & Clothes Rustle...
49.00 EUR
store
local_shipping
INFO
Rycote
DPA 4099 Mini Windjammer [055427]
Blog, interview or podcast in any weather with this windscreen for DPA 4099 Mic. Wind noise reduction of up to 12 dB.
49.00 EUR
store
local_shipping
Austrian Audio
DPH12 Mic Clip Holder
Mic Clamp for Mounting to Drums and Percussion for OC7/OD5/CC8 microphone.
64.00 EUR
store
local_shipping
Neumann
DS 100-1 double mount
Swivel mount for two KVF capsule extensions, black
103.00 EUR
store
local_shipping
Neumann
DS 120 double mount
Dual stand mount with 2 x 1/2" threaded bolts, 3/8"/5/8"/1/2" tripod thread, black"
288.00 EUR
store
local_shipping
Røde
DS-1 Table Stand
The Rode DS1 has a small but heavy bas to securely desk-mount any microphone. The stand...
41.00 EUR
store
local_shipping
Røde
DS2 Desktop Studio Arm
Compact desktop studio arm, Heavy base stand for mounting onto a desk, Maximum weight capacity: 900g, Included 3/8" to 1/4" adaptor, 1471g, Length 170mm , Width 120mm, Height (folded) 190mm, Height (extended) 380mm.
106.00 EUR
store
local_shipping
Omnitronic
DSH-135 Microphone-Popfilter black
Microphone windshield for studio applicationsFront screeningDual nylon scre...
41.00 EUR
store
local_shipping
LD Systems
DSM 45 B
Microphone Shock Mount 45 - 49 mm black...
32.00 EUR
store
local_shipping
LD Systems
DSM400 Mic Shock Mount with Pop Killer
Shock mount for studio microphones with removable fabric pop filter Double nylon...
91.00 EUR
store
local_shipping
Proel
DST130BK
Desktop heavy cast iron base with straight height adjustable tube. Base 150mm, 240-370mm height. 1.9 kg
37.00 EUR
store
local_shipping
Proel
DST140BK
Low-level heigh adjustable microphone stand with fixed boom. 180 mm base, 305-410mm height, 465 mm boom, 2.2. kg
46.00 EUR
store
local_shipping
Proel
DST150BK
Desktop low level double microphone stand. adjustable boom 280 mm, base 180mm, height 280 mm. 1.6 kg.
The DU30b is a microphone preamp and background music preamp. When an announcement is m...
168.00 EUR
store
local_shipping
INFO
DPA
DUA4099
The DUA4099 Foam Windscreen from DPA Microphones is appropriate for the 4099 Instrument M...
46.00 EUR
store
local_shipping
INFO
DPA
DUA6001
The DPA DUA6001 grid provides a 3dB soft boost around 8 - 20kHz when mounted onto DPA min...
64.00 EUR
store
local_shipping
INFO
DPA
DUA6002
The DPA DUA6002 grid provides a 10dB soft boost around 12kHz when mounted onto DPA miniat...
64.00 EUR
store
local_shipping
INFO
DPA
DUA6003
Grid that provides a 3dB soft boost around 8 - 20kHz when mounted onto DPA miniature series microphones. The grip compensates for frequencies lost while mounting the microphone around the head area.
64.00 EUR
store
local_shipping
INFO
DPA
DUA6004
The DPA DUA6004 grid provides a 10dB soft boost around 12kHz when mounted onto DPA miniat...
64.00 EUR
store
local_shipping
INFO
DPA
DUA6005
The DPA DUA6005 grid provides a 3dB soft boost around 8 - 20kHz when mounted onto DPA min...
64.00 EUR
store
local_shipping
INFO
DPA
DUA6006
The DPA DUA6006 grid provides a 10dB soft boost around 12kHz when mounted onto DPA miniature series microphones. The grip compensates for frequencies lost while mounting the microphone around the chest area.
64.00 EUR
store
local_shipping
INFO
DPA
DUA6014
The 10-pack DUA6014 Sweatstop Rings from DPA Microphones are used with miniature micropho...
18.00 EUR
store
local_shipping
INFO
DPA
DUA6017
The DPA DUA6017 grid provides a 3 dB soft boost around 8 - 20 kHz when mounted onto DPA m...
64.00 EUR
store
local_shipping
INFO
DPA
DUA6018
When fitted the grids introduces a 10 dB soft boost around 12 kHz for applications where the Miniature Microphones need to be placed on the chest of the performer.
64.00 EUR
store
local_shipping
INFO
DPA
Dual Headset Mount for Headset Beige
Dual Earhook Mount
120.00 EUR
store
local_shipping
INFO
DPA
Dual Headset Mount for Headset Beige Small
Dual Earhook Mount
120.00 EUR
store
local_shipping
INFO
DPA
Dual Headset Mount for Headset Black
Dual Earhook Mount
120.00 EUR
store
local_shipping
INFO
DPA
Dual Headset Mount for Headset Black Small
Dual Earhook Mount
120.00 EUR
store
local_shipping
INFO
DPA
Dual Headset Mount for Headset Brown
Dual Earhook Mount
120.00 EUR
store
local_shipping
INFO
DPA
Dual Headset Mount for Headset Brown Small
Dual Earhook Mount
120.00 EUR
store
local_shipping
INFO
Rycote
Kampaaniad
Duck Raincover 1
The Rycote Duck-WS1 Duck Rain Cover is an open cell foam accessory with a weatherproof...
138.00 EUR 174.00 EUR
store
local_shipping
Rycote
Duck Raincover 2
The Rycote Duck-WS2 Duck Rain Cover is an open cell foam accessory with a weatherproof...
174.00 EUR
store
local_shipping
INFO
Rycote
Duck Raincover 3
The Rycote Duck-WS3 Duck Rain Cover is an open cell foam accessory with a weatherproof...
174.00 EUR
store
local_shipping
INFO
Rycote
Duck Raincover 4 [214101]
From Rycote, The Duck Rain Cover is a corrugated foam roof with a waterproof inner lini...
174.00 EUR
store
local_shipping
Rycote
Duck Raincover 7
These weatherproof covers protect the microphone windshield from the effects of rain. T...
202.00 EUR
store
local_shipping
INFO
Audix
DVICE-MICRO
40.00 EUR
store
local_shipping
INFO
Countryman
E2CABLELSL
The E2 Earset redefines pure sound in a virtually invisible package, and is easier to u...
109.00 EUR
store
local_shipping
INFO
Countryman
E2CABLELSR
The E2 Earset redefines pure sound in a virtually invisible package, and is easier to u...
119.00 EUR
store
local_shipping
INFO
Countryman
E6 Cable 1NC
Our most popular microphone, the extremely low-profile E6 Earset delivers beautifully u...
78.00 EUR
store
local_shipping
INFO
Countryman
E6 Cable 1P
Our most popular microphone, the extremely low-profile E6 Earset delivers beautifully u...
137.00 EUR
store
local_shipping
INFO
Countryman
E6 Cable 1S3
Detachable aramid-reinforced cable for E6 Earset Cable diameter 1mm>LE...
152.00 EUR
store
local_shipping
INFO
Countryman
E6 Cable 1SL
Detachable aramid-reinforced cable for E6 Earset, TA4F connector.
110.00 EUR
store
local_shipping
INFO
Countryman
E6 Cable 1SR
Detachable aramid-reinforced cable for E6 Earset. Sennheiser Evolution Series (G2 and G3), EW 100, EW 300, EW 500, SK 1093.
119.00 EUR
store
local_shipping
INFO
Countryman
E6 Cable 1SV
Detachable aramid-reinforced cable for E6 Earset Cable diameter 1mmTA3F...
110.00 EUR
store
local_shipping
INFO
Countryman
E6 Cable 1SX
Detachable aramid-reinforced cable for E6 Earset Cable diameter 1mm>Hi...
119.00 EUR
store
local_shipping
INFO
Countryman
E6 Cable 2NC
Detachable aramid-reinforced cable for E6 Earset Cable diameter 2mmOpen e...
78.00 EUR
store
local_shipping
INFO
Countryman
E6 Cable 2SC
Kabeldiameter 2 mmTA4F-kontakt...
110.00 EUR
store
local_shipping
INFO
Countryman
E6 Cap 4L
Our most popular microphone, the extremely low-profile E6 Earset delivers beautifully u...
14.00 EUR
store
local_shipping
INFO
Countryman
E6 ECLT
Our most popular microphone, the extremely low-profile E6 Earset delivers beautifully u...
90.00 EUR
store
local_shipping
INFO
Countryman
E6 Hook T 1mm
This lightweight clip attaches to a collar to manage cable movement and reduce handling...
9.00 EUR
store
local_shipping
Countryman
E6 Hook T 2mm
Our most popular microphone, the extremely low-profile E6 Earset delivers beautifully u...
9.00 EUR
store
local_shipping
Neumann
EA 1
Elastic mounting for M 147 and TLM 102/103/193, 3/8"/ 5/8" / 1/2" tripod thread, nickel"
322.00 EUR
store
local_shipping
Neumann
EA 1 mt
Elastic mounting for M 147 and TLM 102/103/193, 3/8"/ 5/8" / 1/2" tripod thread, black"
322.00 EUR
store
local_shipping
Neumann
EA 170
Elastic mounting for M 149/150 and TLM 170, 3/8"/ 5/8" / 1/2" tripod thread, nickel"
370.00 EUR
store
local_shipping
Neumann
EA 170 mt
Elastic mounting for M 149/150 and TLM 170, 3/8"/ 5/8" / 1/2" tripod thread, black"
349.00 EUR
store
local_shipping
Neumann
EA 2
Elastic suspension for D 01 and TLM 193, 3/8"/ 5/8" / 1/2" tripod thread, nickel"
370.00 EUR
store
local_shipping
Neumann
EA 2 mt
Elastic suspension for D 01 and TLM 193, 3/8"/ 5/8" / 1/2" tripod thread, black"
370.00 EUR
store
local_shipping
Neumann
EA 2124 A mt
Elastic mounting for KM 100, KM D/A, KMS, KMR 81, series 180, 3/8"/ 5/8" / 1/2" tripod thread, black"
243.00 EUR
store
local_shipping
Neumann
EA 4
Elastic mounting for TLM 102, nickel
185.00 EUR
store
local_shipping
Neumann
EA 4 bk
Elastic mounting for TLM 102, black
183.00 EUR
store
local_shipping
Neumann
EA 87
Elastic mounting for U 87 and TLM 67, 3/8"/ 5/8" / 1/2" tripod thread, nickel"
438.00 EUR
store
local_shipping
Neumann
EA 87 mt
Elastic mounting for U 87 and TLM 67, 3/8"/ 5/8" / 1/2" tripod thread, black"
482.00 EUR
store
local_shipping
Neumann
EA 89 A
Elastic mounting for U 89, 3/8"/ 5/8" / 1/2" tripod thread, nickel"
369.00 EUR
store
local_shipping
Neumann
EA 89 A mt
Elastic mounting for U 89, 3/8"/ 5/8" / 1/2" tripod thread, black"
371.00 EUR
store
local_shipping
Ehrlund
EAP System
The EAP System Batt is a kit with the EAP PickUp and the EAP battery powered Preamp....
468.00 EUR
store
local_shipping
Ehrlund
EAP System XLR
DescriptionThe Ehrlund EAP Pickup (Acoustic Pickup) is a linear c...
468.00 EUR
store
local_shipping
Ehrlund
EAP-PREAMP
PREAMP, battery powered Extremely low self-noise, especially developed for Ehrl...
243.00 EUR
store
local_shipping
Ehrlund
EAP-PREPHANTOM
EAP Preamp, Phantom powered Preamp for the EAP Pickup, powered from mixer or ot...
299.00 EUR
store
local_shipping
Sennheiser
Earhook Black 10-pack
Earhook accessory for Headmic 4 in the color black (10 pcs.)
30.00 EUR
store
local_shipping
American Audio
Välkmüük
ECO-MS3
A low micropfone stand for bass drums, guitar amps etc. Adjustable height and shock absor...
27.00 EUR 43.00 EUR
store
local_shipping
Rycote
Edirol (Roland) R09 Mini Windjammer
Suitable for edirol (roland) r09 portable recorder Manufactured from high quality...
50.00 EUR
store
local_shipping
Rycote
Edirol RO5/Tascam DR05 Mini Windjammer
The Rycote Mini Windjammer for Roland R-05 and Tascam DR-05 is a lined slip-on faux fur...
49.00 EUR
store
local_shipping
INFO
Ehrlund
EHR POP FILTER
A brand new material for the Pop Filter that eliminates pop sounds and high pressure ai...
137.00 EUR
store
local_shipping
INFO
Ehrlund
EHR-E CABLE
Cable for EHR-E microphone...
136.00 EUR
store
local_shipping
INFO
Sennheiser
EW-D POWER DISTRIBUTION CABLE
Distribution cable to charge up to 4 x EM2/EM2 Dante® simultaneously
20.00 EUR
store
local_shipping
Sennheiser
EW-D POWER SUPPLY
Power supply for EW-D with country adapters
20.00 EUR
store
local_shipping
Rycote
Extended Small Mini Windjammer
The Rycote Mini Windjammer - Extended Small attenuates high wind and atmospheric noises...
50.00 EUR
store
local_shipping
INFO
Røde
ExtensionKit for Blimp
The Long Shotgun Blimp Extension Kit from Rode is an add-on component kit for the Rode...
97.00 EUR
store
local_shipping
Audix
External windscreen for OM Series
External windscreen for OM Series...
72.00 EUR
store
local_shipping
Lake People
F311-D
Two-channel ultra-low noise microphone preamplifier with excellent audio performance and more than common features.
1010.00 EUR
store
local_shipping
Lake People
F311-Q
High-quality microphone preamp designed for professional audio applications. It is engineered to provide transparent, high-definition sound with exceptional detail, making it ideal for both studio recording and live performances.
1515.00 EUR
store
local_shipping
INFO
Lake People
F355
A state-of-the-art, dual-channel microphone preamplifier engineered for professionals who require high-fidelity sound reproduction.
1699.00 EUR
store
local_shipping
INFO
Lake People
F355-A
Dual-channel mic preamplifier designed for professionals who seek both technical precision and a musically rich character. F355-A incorporates Class A input stages, delivering a warmer, more intimate sound with increased dynamics in the low-mids.
2426.00 EUR
store
local_shipping
INFO
DPA
FA4018VSE2-EW Nickel
The nickel II Supercardioid Vocal Microphone Capsule with SE2-ew Connector from DPA Micro...
1184.00 EUR
store
local_shipping
INFO
DPA
FA4018VSE5B
The black II Supercardioid Vocal Microphone Capsule with SE5 Connector from DPA Microphon...
1184.00 EUR
store
local_shipping
INFO
DPA
FA4018VSE5N
The nickel II Supercardioid Vocal Microphone Capsule with SE5 Connector from DPA Micropho...
1184.00 EUR
store
local_shipping
INFO
DPA
FA4018VSL1B
The new II guarantees users exceptional DPA sound with existing wireless systems - with n...
1184.00 EUR
store
local_shipping
INFO
DPA
FA4018VWI2B
The new II guarantees users exceptional DPA sound with existing wireless systems - with n...
1184.00 EUR
store
local_shipping
INFO
Quik Lok
FAP-01 Pop Filter
Professional pop-filter, metal like plastic filter, 11cm.
39.00 EUR
store
local_shipping
Quik Lok
FAP-05 Pop Filter
Professional pop filter, nylon. 15 cm.
67.00 EUR
store
local_shipping
Quik Lok
FAP006
pop filter with a swivel arm, 157mm diameter, 400mm arm, clamp 15-35mm, 3(8" thread, nylon.
34.00 EUR
store
local_shipping
TritonAudio
FetHead
Microphone preamp for ribbon and dynamic microphones, 1 channel, XLR in/out, 27dB signal amplification, ultra-low noise level, powered by 48V phantom power.
82.00 EUR
store
local_shipping
TritonAudio
FetHead Broadcast
Preamp for live and broadcast application. 25dB's of low noise, high quality amplification which can be applied to either dynamic or condenser microphones as phantom power is transferred to the microphone.
153.00 EUR
store
local_shipping
TritonAudio
FetHead Filter
Microphone preamp with high pass filter. Built-in 6dB/octave high pass filter with a corner frequency of 220Hz.
87.00 EUR
store
local_shipping
TritonAudio
FetHead germanium
High quality, in-line microphone preamplifier. It provides a punchy and direct, ‘larger than life’ germanium sound for ribbon and dynamic microphones, adding classy Germanium harmonics.
96.00 EUR
store
local_shipping
TritonAudio
FetHead Phantom
Microphone preamp for condenser microphone, 1 channel, XLR in/out, 18dB signal amplification, ultra-low noise level, powered by 48V phantom power, provides 48V phantom power to condenser microphone
86.00 EUR
store
local_shipping
TritonAudio
FetHead Transformer
High quality inline mic preamplifier. It provides a very warm and thick yet articulate sound for dynamic and ribbon microphones. Class-A jFET circuit combined with a custom wound nickel core transformer delivers 28dB of transformer infused gain.
98.00 EUR
store
local_shipping
Dinkum
Fixed Base Mount - 1/4"
An alternative base for use with any of the Dinkum Systems® standard ¾" size...
23.00 EUR
store
local_shipping
Dinkum
Fixed Base Mount - 3/8"
3/8" Fixed Mount Base for Dinkum Arms that provides a low-profile and secure mount for the Dinkum Systems CINE and PRO french flags
25.00 EUR
store
local_shipping
Dinkum
FlexiMount
FlexiMount™ is a quick-clamping microphone mount with a strong base and 9-link, 1...
53.00 EUR
store
local_shipping
INFO
Warm Audio
Flight Case WA-251
Aluminum Flight Case that houses all Components of WA-251 System, Soft Ribbed Foam Under Top Lip, Rubberized Foam in Main Compartment.
135.00 EUR
store
local_shipping
Warm Audio
Flight Case WA-47
Aluminum Flight Case that houses all Components of WA-47 System, Soft Ribbed Foam Under Top Lip, Rubberized Foam in Main Compartment.
135.00 EUR
store
local_shipping
INFO
DPA
Foam Windscreens for d:vote CORE 4099, 5 pcs.
Foam Windscreens for d:vote CORE 4099, 5 pcs.
46.00 EUR
store
local_shipping
INFO
Shure
FP A89LW
Rycote replacement foam windscreen for VP89L...
110.00 EUR
store
local_shipping
INFO
Shure
FP A89LW-JMR
Developed by Shure with Rycote, windjammer for VP89S and VP82 fits over windshield for...
313.00 EUR
store
local_shipping
INFO
Shure
FP A89LW-KIT
Kit for VP89L that includes Lyre suspension, windshield, and windjammer
1249.00 EUR
store
local_shipping
INFO
Shure
FP A89LW-SFT
Developed by Shure with Rycote, softie windshield reduces wind noise up to 25 dB. Works...
199.00 EUR
store
local_shipping
INFO
Shure
FP A89MW
Rycote replacement foam windscreen for VP89M...
67.00 EUR
store
local_shipping
INFO
Shure
FP A89MW-JMR
Developed by Shure with Rycote, windjammer for VP89M fits over windshield for additiona...
292.00 EUR
store
local_shipping
INFO
Shure
FP A89MW-KIT
Developed by Shure with Rycote, kit for VP89M includes Lyre suspension, windshield, and...
1204.00 EUR
store
local_shipping
INFO
Shure
FP A89MW-SFT
Softie windshield provides 25 dB of wind protection in harsh environments without adverse effects on high frequency when used with the VP89M End-Address Shotgun Condenser Microphone..
199.00 EUR
store
local_shipping
INFO
Shure
FP A89SW
Rycote replacement foam windscreen for VP89S and VP82...
66.00 EUR
store
local_shipping
INFO
Shure
FP A89SW-JMR
Developed by Shure with Rycote, windjammer for VP89S and VP82 fits over windshield for...
292.00 EUR
store
local_shipping
INFO
Shure
FP A89SW-KIT
Developed by Shure with Rycote, kit for VP89S and VP82 includes Lyre suspension, windsh...
1069.00 EUR
store
local_shipping
INFO
Shure
FP A89SW-SFT
Developed by Shure with Rycote, softie windshield reduces wind noise up to 25 dB. Works...
185.00 EUR
store
local_shipping
INFO
Yellow Cable
FW5
Microphone windscreen & windjammer, black, pair.
21.00 EUR
store
local_shipping
Rycote
FWS 18/32 Windjammer
This Rycote Windjammer is intended to cover an existing Rycote foam windscreen and deli...
49.00 EUR
store
local_shipping
INFO
Rycote
FWS 40/55 Windjammer
This Rycote Windjammer is intended to cover an existing Rycote foam windscreen and deli...
49.00 EUR
store
local_shipping
Omnitronic
GES-1 Mic Table Stand
Mikrofonbordstativ, 17,5 cm, svart.
23.00 EUR
store
local_shipping
DPA
GM1500
For mounting microphones in the piano frame (or any other magnetic surface). The GM1500 Go...
159.00 EUR
store
local_shipping
INFO
Gravity
GMS43DTB
Compact double extendable microphone stand, Robust steel construction, 700-1610mm, transport length 620mm, black, 2.18 kg.
77.00 EUR
store
local_shipping
Gravity
GMSQT2B
Quick Tilt camera adapter with ball joint, 1/4“, 360° rotation with locking screw, 90° tilt, adapter for 3/8” to 1/4“ internal thread, For cameras, digital recorders, action cameras etc. with 1/4” thread.
34.00 EUR
store
local_shipping
Røde
GN1
Miniature (85mm) flexible goose neck for NT6. By using the GN1 with NT6 microphone stan...
34.00 EUR
store
local_shipping
Omnitronic
Gooseneck black XLR/XLR, 47cm
E.g. for putting a microphone on an XLR socket at the mixerFully wiredLengt...
29.00 EUR
store
local_shipping
DPA
Gooseneck Mount
Suitable for all D:Screet lavalier microphonesLength: 15.3 cmFor attaching...
109.00 EUR
store
local_shipping
INFO
DPA
GOOSENECK SHOCK MOUNT FOR d:dicate™ (GSM4000)
Used to mount a microphone on an instrument, the GSM4000 Gooseneck Mount is a combinati...
121.00 EUR
store
local_shipping
INFO
Yamaha
GR-YDM505
Replacement Grille for YDM505/YDM505S
26.00 EUR
store
local_shipping
Yamaha
GR-YDM707 Black
Replacement Grille for YDM707, Black.
26.00 EUR
store
local_shipping
Rycote
Green Lavalier Windjammer - pair
Suitable for use with lavalier mic foams High-level protection against wind noise...
53.00 EUR
store
local_shipping
INFO
Rycote
Grey Lavalier Windjammer - pair
This Rycote windjammer is designed for use with lavalier microphones worn on the outsid...
53.00 EUR
store
local_shipping
Rycote
Grey Lavalier Windjammer - single
This Rycote windjammer is designed for use with lavalier microphones worn on the outsid...
30.00 EUR
store
local_shipping
Rycote
Grey Overcovers Stickies + Discs
Grey Overcovers: 30 x Stickes & 6 Grey Fur Discs...
18.00 EUR
store
local_shipping
Rycote
Grey Ristretto Lavalier Windjamme - single
The gray Rycote Single Ristretto Lavalier Windjammer is a discreet foam wind cover for...
30.00 EUR
store
local_shipping
Rycote
Grey Ristretto Lavalier Windjammer - pair
The gray Rycote Pair Ristretto Lavalier Windjammer is a discreet foam wind cover for us...
53.00 EUR
store
local_shipping
Rycote
Grey Undercovers - 25 packs x 30 uses
Grey Undercovers - 25 packs x 30 uses...
275.00 EUR
store
local_shipping
INFO
Rycote
Grey Undercovers - Pack of 100 uses
Grey Undercovers (incl. 100 x stickies) - Pack of 100 uses...
39.00 EUR
store
local_shipping
INFO
Rycote
Grey Undercovers - pack of 30 uses
The Rycote Undercover pads are a disposable mount and windshield used for mounting lava...
16.00 EUR
store
local_shipping
Audix
GRI5
Basket for Audix i5 dynamic instrument cardioid microphone...
36.00 EUR
store
local_shipping
INFO
Gravity
GTMS4232B
Touring Series microphone stand short with tripod folding base and 2-point adjustment telescopic boom, black. 520-760mm height, 510-880mm boom.
122.00 EUR
store
local_shipping
Gravity
GTMS4332B
Microphone stand, Touring Series, collapsible stand base and telescopic boom with 2-point adjustment 510-880mm, black, 1000-1700mm, 3.5 kg.
Holders of rubber, fits many wireless microphones. Flexible crotch, diameter 29,5mm . B...
7.00 EUR
store
local_shipping
INFO
DPA
Heavy Duty Single Clip (SCM0020-B)
An improved clip for our d:screet™ 4660 Series Heavy Duty Miniature Microphones....
31.00 EUR
store
local_shipping
INFO
Rycote
Hi Wind Cover 1
Designed to fit the Modular Windshield Kit WS1 to offer up to 35dB in wind noise reduction.
92.00 EUR
store
local_shipping
INFO
Rycote
Hi Wind Cover 2
Suitable for the Windshield WS 2 Kit Main Benefits: Lightweight &...
92.00 EUR
store
local_shipping
INFO
Rycote
Hi Wind Cover 295
Suitable for the Windshield WS 295 Kit Main Benefits: Lightweight &a...
92.00 EUR
store
local_shipping
INFO
Rycote
Hi Wind Cover 3
Suitable for the Windshield WS 3 Kit Main Benefits: Lightweight &...
92.00 EUR
store
local_shipping
INFO
Rycote
Hi Wind Cover 4
Add extra wind-noise protection to your Modular Windshield with this durable and discre...
92.00 EUR
store
local_shipping
INFO
Rycote
Hi Wind Cover 5
Add extra wind-noise protection to your Modular Windshield with this durable and discre...
92.00 EUR
store
local_shipping
INFO
Rycote
Hi Wind Cover 6
Add extra wind-noise protection to your Modular Windshield 6.
92.00 EUR
store
local_shipping
INFO
Rycote
Hi Wind Cover 8
The Hi Wind Cover is designed to fit the Modular Windshield Kit to offer up to 35dB in wind noise reduction.
92.00 EUR
store
local_shipping
INFO
Rycote
Hi Wind Cover 9
Suitable for the Windshield WS 9 Kit Main Benefits: Lightweight &...
92.00 EUR
store
local_shipping
INFO
AKG
HM1000
PROVEN RELIABILITYfor use in houses of worship, conference rooms and theatres...
295.00 EUR
store
local_shipping
INFO
Sennheiser
HMD 26 Windscreen Small
1 pc Windscreen, small, for HMD 26, HMD 27, HMD 300 PROseries with white Sennheiser Logo printed
8.00 EUR
store
local_shipping
Sennheiser
HMD 46/ HME 27 Windscreen
1 pc Windscreen for HMD 46, HME 27
10.00 EUR
store
local_shipping
Rycote
HMD46 Mini Windjammer
Windjammer suitable for Sennheiser HMD-46
50.00 EUR
store
local_shipping
Omnitronic
Holder type A f. table microphone arm blk
Quick installation via screw clamp Supplied with the table microphone arm TMA-1...
27.00 EUR
store
local_shipping
Omnitronic
Holder type B f. table microphone arm blk
Quick installation via screw clamp Supplied with the table microphone arm TMA-1...
29.00 EUR
store
local_shipping
Rycote
Hot Shoe 3/8"Adaptor [037302]
The Rycote 037302 Hot Shoe Adaptor with 3/8" Male Thread lets you attach any fitting wi...
35.00 EUR
store
local_shipping
Radial
HotShot 48V Condenser Microphone Switcher
The HotShot 48V is a condenser microphone switcher built for silent operation on stage,...
408.00 EUR
store
local_shipping
Gravity
HP HMS 01 B
Steel clamp with plastic hangerHolds 1-2 headphones or headsets2 convenient...
20.00 EUR
store
local_shipping
Omnitronic
HTS-1 Smartphone and Tablet Stand
Universal tablet holder, Adjustable height, Rotatable for vertical and horizontal formats, Tilting adjustable, Easy fixation for secure hold, 1.20 kg.
40.00 EUR
store
local_shipping
Omnitronic
HTS-2 Smartphone and Tablet Stand
Universal tablet holder, Adjustable inclination angle of the mounting area, Horizontal and vertical inclination angle adjustable, Adjustable height, 1 kg.
36.00 EUR
store
local_shipping
Austrian Audio
HXCB3 Cable
Replacement cable, 3 meter, compatible with Hi-X20/Hi-X15
26.00 EUR
store
local_shipping
Neumann
IC 5 blk
Microphone cable, length: 10m, XLR-5F -> XLR-5M, black
400.00 EUR
store
local_shipping
Røde
Kampaaniad
iClamp
The RØDE iClamp is a heavy-duty clamp designed to provide additional support for...
5.00 EUR 12.00 EUR
store
local_shipping
Omnitronic
IH-3 Smartphone and Tablet Holder
Universal tablet holder,Holder Clamp area: 10 - 25 mm, Terminal Clamp area: 120 - 190 mm; 60 - 80 mm, 460 g.
27.00 EUR
store
local_shipping
IK Multimedia
iKlip A/V
Professional audio and video broadcast recording system for smartphones, XLR mic preamp with phantom power and gain, Integrated wireless receiver support, 1/8” TRRS analog audio output.
208.00 EUR
store
local_shipping
Whirlwind
IMP-1x2 Splitter
Mic splitters, Pressmite, AES splitters, Headphone splitter and Splitter/ brakeout box...
271.00 EUR
store
local_shipping
Whirlwind
IMP-1x3 Splitter
Mic splitters, Pressmite, AES splitters, Headphone splitter and Splitter/ brakeout box...
356.00 EUR
store
local_shipping
INFO
Røde
inner 1/4 to outer 3/8 Adapter
inner 1/4 to outer 3/8 Adapter...
7.00 EUR
store
local_shipping
DPA
Internal Popfilter metalmesh for 2028
pop filter
28.00 EUR
store
local_shipping
INFO
Røde
Interview GO Blue
The Interview GO turns any RØDE Series IV transmitter into a handheld mic for interviews and field content, with an ergonomic handle and windshield for reduced plosives and cleaner audio. Blue
30.00 EUR
store
local_shipping
Røde
Interview GO Green
The Interview GO turns any RØDE Series IV transmitter into a handheld mic for interviews and field content, with an ergonomic handle and windshield for reduced plosives and cleaner audio. Green
30.00 EUR
store
local_shipping
Røde
Interview GO handle and pop for WIGO
Interview GO handle and pop for WIGO...
30.00 EUR
store
local_shipping
INFO
Røde
Interview GO Orange
The Interview GO turns any RØDE Series IV transmitter into a handheld mic for interviews and field content, with an ergonomic handle and windshield for reduced plosives and cleaner audio. Orange
30.00 EUR
store
local_shipping
Røde
Interview GO Pink
The Interview GO turns any RØDE Series IV transmitter into a handheld mic for interviews and field content, with an ergonomic handle and windshield for reduced plosives and cleaner audio. Pink
30.00 EUR
store
local_shipping
INFO
Røde
Interview GO Purple
The Interview GO turns any RØDE Series IV transmitter into a handheld mic for interviews and field content, with an ergonomic handle and windshield for reduced plosives and cleaner audio. purple
30.00 EUR
store
local_shipping
Røde
Interview GO Red
The Interview GO turns any RØDE Series IV transmitter into a handheld mic for interviews and field content, with an ergonomic handle and windshield for reduced plosives and cleaner audio. Red
30.00 EUR
store
local_shipping
Rycote
INV-LITE 19
The Rycote INV-Lite 19 Boom Shock Mount is the new addition to the Rycote InVision rang...
92.00 EUR
store
local_shipping
INFO
Rycote
INV-Lite 21
The INV-Lite is specifically designed for short-shotgun microphones and for indoor boom...
92.00 EUR
store
local_shipping
INFO
Rycote
Invision 7HG MKIII & TAB
Suitable for Microphones from 19 to 34mm in diameter. Ideal for front-heavy microphones...
110.00 EUR
store
local_shipping
INFO
Rycote
InVision INV 7HG MkIII
The Rycote InVision INV-HG mkIII Microphone Suspension addresses the demand for a heavy...
92.00 EUR
store
local_shipping
Rycote
InVision INV-1
The Universal Studio Mount (USM) combines with a new Universal Pop Filter to make a complete vocal microphone suspension and pop filter system that will accommodate virtually any large side address microphone. 6 x 6 x 180cm.
73.00 EUR
store
local_shipping
INFO
Rycote
InVision INV-2
The Rycote INV-2 InVision Microphone Suspension addresses the demand for a professional...
78.00 EUR
store
local_shipping
INFO
Rycote
InVision INV-3
The Rycote INV-3 InVision Microphone Suspension addresses the demand for a professional...
78.00 EUR
store
local_shipping
Rycote
InVision INV-4
The Rycote INV-4 InVision Microphone Suspension addresses the demand for a professional...
78.00 EUR
store
local_shipping
INFO
Rycote
INVision INV-5
Microphone Suspension Suitable for the Beyerdynamic CK930 and Neumann KM100 amongst others.
78.00 EUR
store
local_shipping
INFO
Rycote
InVision INV-6
The Rycote INV-6 InVision Microphone Suspension addresses the demand for a professional...
78.00 EUR
store
local_shipping
INFO
Rycote
InVision INV-6 Heavy
The Rycote Invision 6 HG Mount is used with the Invision series miniature boom pole or...
78.00 EUR
store
local_shipping
INFO
Rycote
InVIsion INV-7
The Rycote INV-7 InVision Microphone Suspension addresses the demand for a professional...
78.00 EUR
store
local_shipping
Rycote
Invision INV-7 POP FILTE
Ry-04112610 mm Foam diameterHeight: 155 mmWidth: 130 mm360 °...
92.00 EUR
store
local_shipping
Rycote
InVision INV-7 Pop Filter Kit
InVision INV-7 Pop Filter Kit is a combined suspension/pop filter kit for high-quality...
129.00 EUR
store
local_shipping
INFO
Rycote
InVision INV-8
The Rycote INV-8 InVision Microphone Suspension addresses the demand for a professional...
78.00 EUR
store
local_shipping
Rycote
InVision INV-9
The Rycote INV-9 InVision Microphone Suspension addresses the demand for a professional...
78.00 EUR
store
local_shipping
INFO
Rycote
InVision INV-BH
The Rycote INV-BH InVision Microphone Suspension addresses the demand for a professiona...
129.00 EUR
store
local_shipping
INFO
Rycote
InVision Stereo Pair Kit
The Rycote In Vision Stereo Pair Kit includes two In Vision 7 HGMK3 Microphone Holders...
165.00 EUR
store
local_shipping
Rycote
InVision Universal Pop Filter
The InVision Universal Pop Filter by Rycote has a custom mesh filter designed to elimin...
50.00 EUR
store
local_shipping
Rycote
InVision USM
This InVision Universal Microphone Shock Mount from Rycote provides a discreet, low-pro...
92.00 EUR
store
local_shipping
INFO
Rycote
Kampaaniad
InVision USM Studio Kit (045002)
The InVision Studio Kit with USM by Rycote is a complete suspension and pop filter syst...
110.00 EUR 129.00 EUR
store
local_shipping
Rycote
Kampaaniad
InVision USM VB-L Studio Kit
The InVision USM VB-L Studio Kit from Rycote is a Universal Studio Mount (USM) and pop...
82.00 EUR 129.00 EUR
store
local_shipping
INFO
Rycote
InVision USM-L
This InVision Universal Lite Microphone Shock Mount from Rycote provides a discreet, lo...
92.00 EUR
store
local_shipping
Rycote
InVision USM-L Studio Kit
The InVision Studio Kit with USM by Rycote is a complete suspension and pop filter syst...
129.00 EUR
store
local_shipping
INFO
Rycote
InVision USM-VB Studio Kit
The InVision Studio Kit with USM-VB by Rycote is a complete suspension and pop filter s...
129.00 EUR
store
local_shipping
INFO
Rycote
InVision USM-VB-L
Universal Studio Mount for Large Diaphragm recording microphones, 55-68mm.
92.00 EUR
store
local_shipping
INFO
Rycote
InVision Video (1/4")
The 042902 InVision Video (1/4 Adapter) from Rycote holds microphones with diameters fr...
83.00 EUR
store
local_shipping
INFO
Rycote
InVision Video Hot Shoe [042901]
Suitable for cameras with a hot shoe Virtually indestructible A lightweight...
83.00 EUR
store
local_shipping
INFO
Focusrite
ISA One
Focusrite proves that what was old is new again with the ISA One. Built on the topology...
799.00 EUR
store
local_shipping
sE Electronics
Isolation Pack
The Isolation Pack is an essential accessory package for anyone wishing to record vocal...
55.00 EUR
store
local_shipping
Beyerdynamic
K 190.40 - 1.5 m
Straight Connecting Cable with 3-Pin XLR Male and 1/4" Stereo, 5 ft. Connecting...
86.00 EUR
store
local_shipping
INFO
König & Meyer
K&M 20004 Extension 50CM
Extension rod for microphone stands. On the one side there is a 3/8“ female threa...
12.00 EUR
store
local_shipping
Neumann
KK 104 U
Cardioid condenser capsule head for wireless systems with Shure interface
967.00 EUR
store
local_shipping
Neumann
KK 104 U BK
Cardioid condenser capsule head for wireless systems with Shure interface
913.00 EUR
store
local_shipping
Neumann
KK 105 U
Supercardioid condenser capsule head for wireless systems with Shure interface
925.00 EUR
store
local_shipping
Neumann
KK 105 U BK
Supercardioid condenser capsule head for wireless systems with Shure interface
967.00 EUR
store
local_shipping
Neumann
KK 120 Nextel Black
Capsule head KMD/A, condenser, bidirectional, system socket, Nextel black
1390.00 EUR
store
local_shipping
Neumann
KK 120 Nickel
Capsule head KMD/A, condenser, bidirectional, system socket, nickel
1390.00 EUR
store
local_shipping
Neumann
KK 13
Capsule head for the Neumann MCM system, Omni, titanium housing, max. SPL 153 dB, diameter 12 mm
297.00 EUR
store
local_shipping
Neumann
KK 131 Nextel Black
Capsule head KMD/A, condenser, omnidirectional (free field equalized), system socket, Nextel black
772.00 EUR
store
local_shipping
Neumann
KK 131 Nickel
Capsule head KMD/A, condenser, omnidirectional (free field equalized), system socket, nickel
772.00 EUR
store
local_shipping
Neumann
KK 133 Nextel Black
Capsule head KMD/A, condenser, omnidirectional (diffuse field equalized), system socket, Nextel b/w, includes SBK 133
2625.00 EUR
store
local_shipping
Neumann
KK 133 Nickel
Capsule head KMD/A, condenser, omnidirectional (diffuse field equalized), system socket, nickel, includes SBK 133
2625.00 EUR
store
local_shipping
Neumann
KK 14
Capsule head for the Neumann MCM System, cardioid, titanium housing, max. SPL 153 dB, diameter 12 mm. Includes (1) K 14.
297.00 EUR
store
local_shipping
Neumann
KK 143 Nextel Black
Capsule head KMD/A, condenser, wide cardioid, system socket, Nextel black
772.00 EUR
store
local_shipping
Neumann
KK 143 Nickel
Capsule head KMD/A, condenser, wide cardioid, system socket, nickel
772.00 EUR
store
local_shipping
Neumann
KK 145 Nextel Black
Capsule head KMD/A, condenser, cardioid (with bass roll off), system socket, Nextel black
772.00 EUR
store
local_shipping
Neumann
KK 145 Nickel
Capsule head KMD/A, condenser, cardioid (with bass roll off), system socket, nickel
772.00 EUR
store
local_shipping
Neumann
KK 183 Nextel Black
Capsule head KMD/A, condenser, omnidirectional, system socket, Nextel black
772.00 EUR
store
local_shipping
Neumann
KK 183 Nickel
Capsule head KMD/A, condenser, omnidirectional, system socket, nickel
772.00 EUR
store
local_shipping
Neumann
KK 184 Nextel Black
Capsule head KMD/A, condenser, cardioid, system socket, Nextel black
669.00 EUR
store
local_shipping
Neumann
KK 184 Nickel
Capsule head KMD/A, condenser, cardioid, system socket, nickel
669.00 EUR
store
local_shipping
Neumann
KK 185 Nextel Black
Capsule head KMD/A, condenser, hypercardioid, system socket, Nextel black
772.00 EUR
store
local_shipping
Neumann
KK 185 Nickel
Capsule head KMD/A, condenser, hypercardioid, system socket, nickel
772.00 EUR
store
local_shipping
Neumann
KK 204 BK
Neumann microphone module for SKM 500 G4/2000/6000/9000, condenser, cardioid, black
916.00 EUR
store
local_shipping
Neumann
KK 204 NI
Neumann microphone module for SKM 500 G4/2000/6000/9000, condenser, cardioid, nickel
978.00 EUR
store
local_shipping
Neumann
KK 205 BK
Neumann microphone module for SKM 500 G4/2000/6000/9000, condenser, supercardioid, black
969.00 EUR
store
local_shipping
Neumann
KK 205 NI
Neumann microphone module for SKM 500 G4/2000/6000/9000, condenser, supercardioid, nickel
905.00 EUR
store
local_shipping
Proel
Kampaaniad
KP845
Triangular base nearfield monitor stand. 662-1087 mm, 230x230mm top plate, max load 50 kg, 3.35 kg.
69.00 EUR 84.00 EUR
store
local_shipping
Omnitronic
KS-4 Table Microphone Stand
For microphons included holderThree detachable feetHeight infinitely variab...
23.00 EUR
store
local_shipping
INFO
Rycote
Lavalier Foams Beige (1 pack of 5)
Protect your lavalier microphone from wind noise and the elements with the Rycote 10550...
26.00 EUR
store
local_shipping
INFO
Rycote
Lavalier Foams Beige (10 packs of 5)
The Lavalier Foam is a discreet, slip-on foam windshield, designed to protect personal...
211.00 EUR
store
local_shipping
INFO
Rycote
Lavalier Foams Black (1 pack of 5)
Protect your lavalier microphone from wind noise and the elements with the Rycote 10550...
26.00 EUR
store
local_shipping
Rycote
Lavalier Foams Black (10 packs of 5)
Lavalier Foam is a discreet, slip-on foam windshield, 10-pack of 5, black, total 50pcs.
211.00 EUR
store
local_shipping
INFO
Rycote
Lavalier Foams Brown (1 pack of 5)
Protect your lavalier microphone from wind noise and the elements with the Rycote 10550...
26.00 EUR
store
local_shipping
INFO
Lewitt
LCT 40 M2 Stereo Bar
LCT 40 M2 Stereo bar Stereo bar for accurate positioning of mics. Compatible wi...
35.00 EUR
store
local_shipping
Lewitt
LCT 40 SH WH Shock mount
Shock mount white LCT 40 SHW Suitable for: LCT 240 PRO, LCT 440 PURE, LCT 441 F...
47.00 EUR
store
local_shipping
INFO
Lewitt
LCT 40 Shock mount
Suitable for: LCT 240 PRO, LCT 440 PURE, LCT 441 FLEX Shock mount for studio mi...
High-quality foam windscreenWindscreen. Prevents loud pops from spoken or sung consonants. Ultraviolet radiation resistant. Suitable for LCT series.
12.00 EUR
store
local_shipping
Lewitt
LCT 50 PSx Magnetic pop filter
This efficient magnetic pop filter will effectively reduce pop and hiss. Compatible wit...
30.00 EUR
store
local_shipping
Sony
Lemo Conversion Kit
LEMO CONVERSION KIT FOR DWT-B01/E DWX BELT PACK TRANSMITTER...
124.00 EUR
store
local_shipping
INFO
Neumann
LH 46
Mounting hardware to vertically position a loudspeaker suspended off a ceiling, black (RAL 9005)
449.00 EUR
store
local_shipping
Omnitronic
Kampaaniad
LH-045 Microphone Preamplifier
Compact mixer to mix 3 microphones to 1 line output, with individual level control /...
87.00 EUR 114.00 EUR
store
local_shipping
Omnitronic
Kampaaniad
LH-050 Phantom Power Adapter
Phantom power for microphones +48 V phantom power for condenser or electret mic...
79.00 EUR 97.00 EUR
store
local_shipping
Whirlwind
Little IMP
Lo to Hi Impedance Matcher.
39.00 EUR
store
local_shipping
Samson
LM8 Windscreen
Windscreen for LM8 lavalier microphone. ...
8.00 EUR
store
local_shipping
Solid State Logic
LMC+ Module
The classic SSL Listen Mic Compressor with an added creative twist. The LMC+ Mo...
682.00 EUR
store
local_shipping
INFO
DPA
Locking Ring, Black
Locking Ring for d:sign Gooseneck...
21.00 EUR
store
local_shipping
INFO
DPA
Locking Ring, White
Locking Ring for d:sign Gooseneck...
21.00 EUR
store
local_shipping
INFO
ART
M-WS
The most acoustically transparent windscreen we’ve ever tested. Ideal for use wit...
55.00 EUR
store
local_shipping
Rycote
M58/SM58/MCE82 Mini Windjammer
The Rycote Mini Windjammer provides optimum wind diffusion for smaller microphones. Lik...
50.00 EUR
store
local_shipping
INFO
Gravity
MA 3D A POP 1
Traveler 3D Arm with Pop Filter
40.00 EUR
store
local_shipping
Gravity
MA MH 01
Large, convenient attachment screw knobCaptive mic clip mount screwMade of...
21.00 EUR
store
local_shipping
Gravity
MA Pop 1
157mm Pop filter, double nylon mesh and VARI-ARM.
50.00 EUR
store
local_shipping
Gravity
MA T TH 02 SET 1
Traveler tablet holder and microphone stand, Round base, Sturdy, Easy to mount, For all tablets with 7.3" to 12.9" screens, Ball joint, 1000-1600mm, 4.456 kg.
86.00 EUR
store
local_shipping
Gravity
MA T TH 02 SET 2
Traveler tablet holder and 1-hand mic stand, Suitable for all tablets with 7.3" to 12.9" screens, Round base, Ball joint, Single-handed height adjustment, 1080-1750 mm, 4.656 kg.
100.00 EUR
store
local_shipping
Gravity
MA TRAY 1
Solid and durable constructionErgonomic operationUniversal application /...
52.00 EUR
store
local_shipping
Gravity
MA TRAY 2
Solid and durable constructionErgonomic operationUniversal application...
40.00 EUR
store
local_shipping
Rycote
Marantz PMD 661 Mini Windjammer
The Rycote Mini Windjammer is a lined slip-on fur cover designed for use with the Maran...
50.00 EUR
store
local_shipping
Rycote
Marantz PMD620 /Tascam DR-1 Mini Windjammer
The Rycote Mini Windjammer is a lined slip-on fur cover designed for use with the Maran...
50.00 EUR
store
local_shipping
INFO
Sennheiser
MAS 1 B
Table-mounted button, 5-pin XLR-M, black
122.00 EUR
store
local_shipping
Sennheiser
MAS 1 W
Table-mounted button, 5-pin XLR-M, white
122.00 EUR
store
local_shipping
Sennheiser
MAT 153-S B
Table base for MEG 14-40-L II, sensor with LED ring, TTL logic, IN 5-pole XLR-F OUT 3-pole XLR- M, 24-48 V phantom, black
297.00 EUR
store
local_shipping
Samson
MBA28
MBA28 Microphone Boom Arm is the perfect microphone accessories for any radio, podcast...
67.00 EUR
store
local_shipping
Neumann
MC 1
Clip to mount the MCM gooseneck on violin, viola, mandolin and similar instruments. Includes (1) MC 1.
71.00 EUR
store
local_shipping
Neumann
MC 2
Clip to mount the MCM gooseneck on the strings of a cello. Includes (1) MC 2.
71.00 EUR
store
local_shipping
Neumann
MC 3
Clip to mount the MCM gooseneck on the strings of a double bass. Includes (1) MC 3.
71.00 EUR
store
local_shipping
Neumann
MC 4
Clip to mount the MCM gooseneck on the rib of a double bass, comes with reduction piece. Includes (1) MC 4.
103.00 EUR
store
local_shipping
Neumann
MC 5
Universal strap clip to mount the MCM gooseneck on oboe, clarinet, recorder, bassoon, flute, harp. Includes (1) MC 5.
71.00 EUR
store
local_shipping
Neumann
MC 6
Universal clamp to mount the MCM gooseneck on a trumpet, trombone, saxophone, french horn, percussion instruments and stand rods. Includes (1) MC 6.
103.00 EUR
store
local_shipping
Neumann
MC 7
Clip to mount the MCM gooseneck on snare, tom, stand tom, timpani . Includes (1) MC 7.
81.00 EUR
store
local_shipping
Neumann
MC 8
Magnetic clip to mount the MCM gooeseneck in a piano or grand piano. Includes (1) MC 8.
71.00 EUR
store
local_shipping
Neumann
MC 9
Clip to mount the MCM gooseneck on guitar, ukulele, dobro, acoustic bass, cello, comes with reduction piece. Includes (1) MC 9.
92.00 EUR
store
local_shipping
Audix
MC-HANGER
Hanger for Micros series and ADX40. Clear plastic hanger allows control over angle and...
36.00 EUR
store
local_shipping
INFO
Audix
MC-MICRO
10.00 EUR
store
local_shipping
Meinl
MC-MRBD
Unique clamp for placing the bass drum microphone directly on the bass drum. It consists of a U-shaped bar with a 3/8" diameter and has a threaded end for attaching a microphone with a standard microphone clamp.
54.00 EUR
store
local_shipping
Audix
MC-SWIVEL
For use with the Audix Micros, this innovative shockmount adapter employs a ball and so...
Standard nylon molded clip with brass insert. Provided with all OM Series, VX5, VX10, i...
11.00 EUR
store
local_shipping
INFO
Yellow Cable
MC1
Microphone adapter, clamp, 2-pack.
7.00 EUR
store
local_shipping
Audix
MC10L
Optional alligator style lapel clip with spring tension wire loop for ADX10...
8.00 EUR
store
local_shipping
INFO
Yellow Cable
MC2
Microphone adapter, 28mm, 2-pack.
7.00 EUR
store
local_shipping
American Audio
MC2
MCL2 Microphone holder, rubber, black TYPE2...
2.62 EUR
store
local_shipping
INFO
Audix
MC20-I
Gooseneck clip with shock mount provided with ADX20i microphone. Butterfly clamp attach...
40.00 EUR
store
local_shipping
INFO
American Audio
MC3
MC3 Microphone Holder, rubber...
4.00 EUR
store
local_shipping
INFO
DPA
MC4001
The MC4001 Microphone Clip from DPA fits the recess at the MMP-E active cable preamp. It...
111.00 EUR
store
local_shipping
INFO
Audix
MCBOOM
Gooseneck clip with shock mount provided with ADX20i microphone. Butterfly clamp attach...
41.00 EUR
store
local_shipping
INFO
Radial
McBoost
26dB signal booster for dynamic & ribbon micsExtends dynamic range and microp...
248.00 EUR
store
local_shipping
Audix
MCFLUTE
Replacement clip for ADX10FLP flute mic. Designed for standard size Flutes...
25.00 EUR
store
local_shipping
INFO
Omnitronic
MCK-10G Microphone-Clamp flexible
Flexible clamp for microphones with d = 27 - 32 mmInside thread: 1.5 cm (5/8")...
7.00 EUR
store
local_shipping
Omnitronic
MCK-15 Microphone-Clamp flexible
Flexible clamp for microphones with d = 28 - 35 mmStandard 16 mm inside thread...
6.00 EUR
store
local_shipping
Omnitronic
MCK-25 Microphone Clamp sw
Clamp for microphones of round and tapered design with a diameter of 19 - 32 mmWi...
5.00 EUR
store
local_shipping
Omnitronic
MCK-30 Microphone Clamp flexible
For microphones with d = 29 - 35 mmWith standard 16 mm inside thread (5/8")...
6.00 EUR
store
local_shipping
Zoom
MCL-1
The MCL-1 is a clip for Zoom lavalier microphone. With the MCL-1, you can attach Zoom l...
14.00 EUR
store
local_shipping
Samson
MD5
Samson's MD5 Desktop Microphone Stand is the ideal tool for any home studio. The MD5 is...
22.00 EUR
store
local_shipping
Omnitronic
MDP-1 Microphone Holder for Drums
Flexible hold for screw mounting, for all drums and toms ...
21.00 EUR
store
local_shipping
RTX
MDX
Microphone stand, tripod, straight, black satin, 2.3 kg.
42.00 EUR
store
local_shipping
RTX
MDX-ER
RTX TRT MDX-ER flexible microphone stand with cast iron base...
74.00 EUR
store
local_shipping
Sennheiser
ME 34
Condenser microphone head for MZH goosenecks, cardioid, black, includes windscreen MZW 34 B
225.00 EUR
store
local_shipping
Sennheiser
ME 34 W
Condenser microphone head for MZH goosenecks, cardioid, white, includes windscreen MZW 34 W
225.00 EUR
store
local_shipping
Sennheiser
ME 35
Condenser microphone head for MZH goosenecks, supercardioid, black, includes windscreen MZW 34 B
225.00 EUR
store
local_shipping
Sennheiser
ME 35 W
Condenser microphone head for MZH goosenecks, supercardioid, white, includes windscreen MZW 34 W
225.00 EUR
store
local_shipping
Sennheiser
ME 36
Condenser microphone head for MZH goosenecks, supercardioid/directional, black, includes windscreen MZW 36 B
339.00 EUR
store
local_shipping
Rycote
ME 36 Mini Windjammer
Rycote ME36 Windjammer, RY-055349 suitabale for Sennheiser ME36...
50.00 EUR
store
local_shipping
INFO
Sennheiser
ME 36 W
Condenser microphone head for MZH goosenecks, supercardioid/directional, white, includes windscreen MZW 36 W
298.00 EUR
store
local_shipping
Sennheiser
ME 9002
Microphone module for SKM 6000, SKM 9000, condenser, omnidirectional, black
618.00 EUR
store
local_shipping
Sennheiser
ME 9004
Microphone module for SKM 6000, SKM 9000, condenser, cardioid, black
618.00 EUR
store
local_shipping
Sennheiser
ME 9005
Microphone module for SKM 6000, SKM 9000, condenser, supercardioid, black
618.00 EUR
store
local_shipping
Rycote
Medium Mini Windjammer
The Mini Windjammer is a simple, lined, furry cover to fit over the microphone directly...
50.00 EUR
store
local_shipping
INFO
IK Multimedia
MEMS microphone for iRig Acoustic Stage
Works only in association with the iRig Acoustic Stage DSP unit. iRig...
64.00 EUR
store
local_shipping
INFO
sE Electronics
Metal Pop Filter
Filtering pop and sibilance while protecting your mic when recording vocals, the S...
33.00 EUR
store
local_shipping
Neumann
MF 2 table stand
Tabletop stand, circular base ø 6cm with foam rubber washer, 1/2" thread, black"
173.00 EUR
store
local_shipping
Neumann
MF 3 table stand
Table stand, circular base ø 11cm with foam rubber washer, 3/8” and 1/2" thread, black"
318.00 EUR
store
local_shipping
Neumann
MF 4 floor stand
Floor stand, circular base ø 16cm with foam rubber washer, 3/8” and 1/2" thread, black"
430.00 EUR
store
local_shipping
Neumann
MF 5 floor stand
Floor stand, circular base ø 25 cm with rubber ring, 3/8” thread, powder-coated, gray
206.00 EUR
store
local_shipping
Hercules
MH200B POP Filter
Hercules MH200B Pop Filter, 155mm Diameter FEATURES: Attachable on Micr...
20.00 EUR
store
local_shipping
DPA
MHS6005
The DPA Microphone Holder for Stringed Instruments (5 Pieces) MHS6005 is a soft piece of...
31.00 EUR
store
local_shipping
INFO
Omnitronic
MIC 77LM Holder
Clamp for drum rimsAccessory for models MIC 77L and MIC 77M...
20.00 EUR
store
local_shipping
DPA
Mic Base White Unterminated P48
Mic Base White Unterminated P48
328.00 EUR
store
local_shipping
INFO
DPA
Mic Base, Black, MicroDot
The Microphone Base brings sleek Scandinavian design to the meeting rooms where it is i...
202.00 EUR
store
local_shipping
INFO
DPA
Mic Base, Black, unterminated, P48
The Microphone Base brings sleek Scandinavian design to the meeting rooms where it is i...
328.00 EUR
store
local_shipping
INFO
DPA
Mic Base, Black, XLR, P48
Table top baseplate, XLR, black
347.00 EUR
store
local_shipping
INFO
DPA
Mic Base, White, MicroDot
The Microphone Base brings sleek Scandinavian design to the meeting rooms where it is i...
202.00 EUR
store
local_shipping
INFO
DPA
Mic Base, White, XLR, P48
The Microphone Base brings sleek Scandinavian design to the meeting rooms where it is i...
347.00 EUR
store
local_shipping
INFO
Universal Audio
Mic Mount for UA Mics Black
Mic Mount for UA Mics, black, Fits all UA microphones except Bock 251.
31.00 EUR
store
local_shipping
INFO
Universal Audio
Mic Mount for UA Mics Silver
Mic Mount for UA Mics, Silver, Fits all UA microphones except Bock 251.
31.00 EUR
store
local_shipping
INFO
Rycote
Mic Protector Case 20CM
Suitable for 3 microphones with a length of up to 20 cmSturdy waterproof PVC case...
49.00 EUR
store
local_shipping
INFO
Rycote
Mic Protector Case 30CM
Suitable for 3 microphones with a length of up to 30 cmSturdy waterproof PVC case...
58.00 EUR
store
local_shipping
INFO
Samson
Mic Splitter
Mic splitter, passive, XLR/TRS combo input, two parallel XLR outputs, XLR thru, ground lifts on all connectors, metal chassis, no external power, studio and live use.
133.00 EUR
store
local_shipping
D'Addario
MIC STAND ACCESSORY SYSTEM
The Mic Stand Accessory System is the first fully modular mic stand-mounted performance...
85.00 EUR
store
local_shipping
Rycote
Mic Tubes Long 3-pack
The Rycote Mic Tubes are made of clear PVC. In addition to offering additional physical...
18.00 EUR
store
local_shipping
INFO
Quik Lok
MIC-001
Microphone stand. Elegant and functional alternative for microphone use in desktop and conference room settings.
58.00 EUR
store
local_shipping
Omnitronic
Mic-Table Stand 25 cm Gooseneck black
ca 1,59 cm (5/8") to ca 0,64 cm (1/4") winding adapterSimple and save camera inst...
16.00 EUR
store
local_shipping
Røde
Micdrop
Simple cable weight for lavalier microphones
37.00 EUR
store
local_shipping
Whirlwind
MICMUTE PP
The Micmute PP are configured as latching Push On; Push Off switch, meaning that the sw...
234.00 EUR
store
local_shipping
INFO
Whirlwind
MicMute-PT
PT are configured as Push to Talk switches ...
253.00 EUR
store
local_shipping
INFO
Røde
Micro Boom Pole
The RØDE Micro Boompole provides ultimate boom pole performance in a convenient...
67.00 EUR
store
local_shipping
INFO
Rycote
Micro Windjammer 25 Singles Packs
Rycote micro windjammers, pack of 30 Stickies with 6 re-usable grey fur covers ...
395.00 EUR
store
local_shipping
INFO
Rycote
Micro Windjammer Single Pack
Rycote micro windjammers, pack of 30 Stickies with 6 re-usable grey fur covers ...
18.00 EUR
store
local_shipping
Audix
MICROBOOM24
The AKG Audix MicroBoom Carbon Fiber 24" Boom (Microphone Not Included) is a carbon...
208.00 EUR
store
local_shipping
Audix
MICROBOOM50
The AKG Audix MicroBoom Carbon Fiber 50" Boom without Microphone is a carbon fiber r...
321.00 EUR
store
local_shipping
Audix
MICROBOOM84
The AKG Audix MicroBoom Carbon Fiber 84" Boom without Microphone is a carbon fiber r...
465.00 EUR
store
local_shipping
INFO
Røde
MicroBoomPolePRO
The Micro Boompole Pro from RODE is an ultra-lightweight modular boom pole that extends...
111.00 EUR
store
local_shipping
DPA
Microdot Extension Cable, 1.6 mm (CM1618B00, CM1610B00)
Microphone Cable for Headset S2 Connector Brown 3-pin LEMO
Microphone Cable for Headset S2 Connector, Brown, 3-pin LEMO
237.00 EUR
store
local_shipping
INFO
DPA
Microphone Cable for Headset S2 Connector Brown MicroDot
Microphone Cable for Headset S2 Connector, Brown, MicroDot
124.00 EUR
store
local_shipping
INFO
DPA
Microphone Cable for Headset S2 Connector Brown Mini-Jack
Microphone Cable for Headset S2 Connector Brown Mini-Jack
237.00 EUR
store
local_shipping
INFO
DPA
Microphone Cable for Headset S2 Connector Brown TA4F Mini-XLR
Microphone Cable for Headset S2 Connector Brown TA4F Mini-XLR
237.00 EUR
store
local_shipping
INFO
Veles-X
Uudis
Microphone Cover
Microphone Cover, Double Sided Silver And Black Design, Water Resistant Material, Elastic Bottom For Secure Fit, Height 24 cm, Width 12 cm.
21.00 EUR
store
local_shipping
Manfrotto
Microphone Holder 154B
The innovative Three Baby Bracket for any situation. This perfectly designed Microphone...
138.00 EUR
store
local_shipping
Goby Labs
Kampaaniad
Microphone Sanitizer 4 fl oz
Microphone Sanitizer is formulated to clean and disinfect microphones. This easy-to-use spray kills 99.99% of germs that cause odors on microphones and gear
8.00 EUR 19.00 EUR
store
local_shipping
Omnitronic
Microphone Stand 85-157cm bk
Cast iron base with three rubber feetWith 1.5 cm (5/8") screwVery stable...
44.00 EUR
store
local_shipping
DAP Audio
Microphone Stand Ergo2
Mikrofonstativ, 415–660 mm, 3/8 gänga, bom 580–890 mm, svart, stativben, 1,66 kg.
72.00 EUR
store
local_shipping
Pulse
Microphone Stand MS232BK
Microphone stand with adjustable telescopic boom. All screws and bolts are metal making...
51.00 EUR
store
local_shipping
Omnitronic
Microphone Tripod MS-1W with Boom Arm white
Easy assemblingFully shock absorbingBoom arm adjustableHeight univers...
44.00 EUR
store
local_shipping
Omnitronic
Microphone Tripod MS-2 with Boom bk
Easy assemblingFully shock absorbingBoom arm adjustable...
51.00 EUR
store
local_shipping
Omnitronic
Microphone Tripod MS-2A with Boom bk
Easy assemblingFully shock absorbingBoom arm adjustable...
40.00 EUR
store
local_shipping
Omnitronic
Microphone Tripod MS-3 with Boom bk
Stable one-handed microphone stand with adjustable boom, 70-200cm, 780mm boom, steel, black. max weight 3kg, weight 2kg.
75.00 EUR
store
local_shipping
Omnitronic
Microphone Tripod with Boom, PRO bk
Rugged constructionAdded stabilityFully shock absorbingBoom arm adjus...
68.00 EUR
store
local_shipping
Hosa
Microphone Windscreen
Black windscreen for ball-style microphones. Fits most common microphones.
4.70 EUR
store
local_shipping
Omnitronic
Microphone Windshield Set, 5 colors
Microphone windscreen -Windscreen made of plastic foam-D...
18.00 EUR
store
local_shipping
Omnitronic
Microphone-Pop Filter metal, black
Front and screeningFine wire mesh, d=135 mmFlexible gooseneck, 30 cmS...
33.00 EUR
store
local_shipping
Omnitronic
Microphone-Pop Filter, black
Front and screeningFine wire mesh, d=155 mmFlexible gooseneck, 33 cmS...
41.00 EUR
store
local_shipping
American Audio
Microstand PRO-MS1 tripod, ext
- professional steel stand - retractable legs - noise reduicion rubbe feets...
46.00 EUR
store
local_shipping
DAP Audio
Mini 4-P XLR Adapter
Mini XLR 4-pin to XLR 3-pin male, supplies miniature condenser microphones with power via phantom power.
39.00 EUR
store
local_shipping
Kinsman
Mini Microphone Boom Stand black
Mini Boom Mic Stand, tabletop, with mic clip, max 44 cm.
61.00 EUR
store
local_shipping
INFO
Rycote
Välkmüük
Mini Windjammer for Rode VMP+
Suitable for Rode Video Mic Pro+High-Quality Synthetic Fur...
31.00 EUR 49.00 EUR
store
local_shipping
AKG
Mini XLR > XLR (MPA VL)
Phantom power adapter with XLR connector for L type MicroMic microphones with integrated bass roll-off switch - 9 to 52 Volts.
75.00 EUR
store
local_shipping
DPA
Miniature Grid 4466 High Boost Beige 5 pcs.
Miniature Grid, High Boost for 4466 Omnidirectional Headset Microphones. 5-pack, beige.
67.00 EUR
store
local_shipping
INFO
DPA
Miniature Grid 4466 High Boost Brown 5 pcs.
Miniature Grid, High Boost for 4466 Omnidirectional Headset Microphones. 5-pack, brown.
The Miniature Black Lavalier Foam from Rycote is a windscreen for use with Sanken's COS...
129.00 EUR
store
local_shipping
Rycote
Miniature Lavalier Foams Black (1 pack of 2)
The Miniature Black Lavalier Foam from Rycote is a windscreen for use with Sanken's COS...
30.00 EUR
store
local_shipping
INFO
Røde
MINIFUR-HS1
The MINIFUR-HS1 is an artificial fur wind shield designed for us on the HS1 headset mic...
46.00 EUR
store
local_shipping
Røde
MINIFUR-LAV
The Rode MINIFUR-LAV Synthetic Fur Windshield is a package of 3 windshields for Rode la...
27.00 EUR
store
local_shipping
Rycote
Mix Colours Overcovers - 25 packs x 30 uses
Overcover packs contain 30 Stickies and 6 re-usable fur discs, including 2 of each colour: white, grey & black.
395.00 EUR
store
local_shipping
INFO
Rycote
Mix Colours Overcovers Pack of 30 uses [065505]
The Rycote Overcover pads are a disposable mounting and windshield solution for lavalie...
18.00 EUR
store
local_shipping
INFO
Rycote
Mix Colours Undercover Packs - 25 x 30 uses
Mound lavalier mics under clothing Perfect for on-camera interviews Mount L...
275.00 EUR
store
local_shipping
INFO
Rycote
Mix Colours Undercovers - pack of 30 uses
The Rycote Undercover pads are a disposable mount and windshield used for mounting lava...
16.00 EUR
store
local_shipping
Harrison Audio
Mix Strip 32C
All-analog channel strip, Mic and Line XLR inputs, Instrument/Hi-Z, Mic combi-XLR input, Legendary Jensen JT-MB-CPCA transformer, Harrison 4 band parametric EQ, Low Pass and High Pass filters.
1730.00 EUR
store
local_shipping
Eventide
MixingLink
High quality mic pre with FX loop in a compact form factor.
395.00 EUR
store
local_shipping
Sennheiser
MKS 4
Oscillating mount made of metal with open ring for MK 4 (digital) and MK 8
88.00 EUR
store
local_shipping
Sennheiser
MKW 4
Screen for MK 4 (digital) and MK 8, foam, black
30.00 EUR
store
local_shipping
Sennheiser
MM 435
Microphone module for MD 435 (cardioid, dynamic)
402.00 EUR
store
local_shipping
Sennheiser
MM 445
Microphone module for MD 445 (super cardioid, dynamic)
402.00 EUR
store
local_shipping
Rolls
MM11-PRO
The MM11 Pro MicMute is a simple device designed to temporarily mute or talk a balanced...
106.00 EUR
store
local_shipping
DPA
MMC2006
The DPA MMC2006 Twin Diaphragm Omni Microphone Capsule is a modular omnidirectional capsu...
586.00 EUR
store
local_shipping
INFO
DPA
MMC2011
The DPA MMC2011 Twin Diaphragm Cardioid Microphone Capsule is a modular cardioid capsule...
663.00 EUR
store
local_shipping
INFO
DPA
MMC4006
The DPA MMC4006 Omni Microphone Capsule is a modular omnidirectional capsule with a trans...
2149.00 EUR
store
local_shipping
INFO
DPA
MMC4011
The DPA MMC4011 Cardioid Microphone Capsule is a modular cardioid capsule with a transpar...
1570.00 EUR
store
local_shipping
INFO
DPA
MMC4015
The DPA MMC4015 Wide Cardioid Microphone Capsule is a modular wide cardioid capsule with...
1570.00 EUR
store
local_shipping
INFO
DPA
MMC4017
The DPA MMC4017 Hypercardioid Microphone Capsule is a modular supercardioid capsule with...
1525.00 EUR
store
local_shipping
INFO
DPA
MMC4018
The MMC4018 Supercardioid Microphone Capsule is part of the flexible Recording Microphone...
1570.00 EUR
store
local_shipping
INFO
DPA
MMC4018V
DPA's Microphone Capsule for Vocal is part of the flexible DPA vocal microphone se...
856.00 EUR
store
local_shipping
INFO
DPA
MMC4018VL
This modular microphone capsule is part of the flexible Handheld Microph...
856.00 EUR
store
local_shipping
INFO
Sennheiser
MMD 42-1
Omnidirectional dynamic microphone capsule compatible with AVX, D1, SpeechLine DW, evolution wireless and 2000, 6000 and 9000 Series microphones"
198.00 EUR
store
local_shipping
Sennheiser
MMD 835-1 BK
Microphone module, dynamic, cardioid, for SKM 100/300/500 G3 and G4, SKM 2000/6000/9000, SKM D1/AVX, SL Handheld DW, black
99.00 EUR
store
local_shipping
Sennheiser
MMD 845-1 BK
Microphone module, dynamic, supercardioid, for SKM 100/300/500 G3 and G4, SKM 2000/6000/9000, SKM D1/AVX, SL Handheld DW, black
101.00 EUR
store
local_shipping
Sennheiser
MMD 935-1 BK
Microphone module, dynamic, cardioid, for SKM 100/300/500 G3 and G4, SKM 2000/6000/9000, SKM D1/AVX, SL Handheld DW, black
193.00 EUR
store
local_shipping
Sennheiser
MMD 945-1 BK
Microphone module, dynamic, supercardioid, for SKM 100/300/500 G3 and G4, SKM 2000/6000/9000, SKM D1/AVX, SL Handheld DW, black
193.00 EUR
store
local_shipping
Sennheiser
MME 865-1 BK
Microphone module, condenser, supercardioid, for SKM 100/300/500 G3 and G4, SKM 2000/6000/9000, SKM D1/AVX, SL Handheld DW, black
233.00 EUR
store
local_shipping
Sennheiser
MMK 965-1 BK
Microphone module, condenser, cardioid/supercardioid, for SKM 100/300/500 G3 and G4, SKM 2000/6000/9000, SKM D1/AVX, SL Handheld DW, black
571.00 EUR
store
local_shipping
Sennheiser
MMK 965-1 NI
Microphone module, condenser, cardioid/supercardioid, for SKM 100/300/500 G3 and G4, SKM 2000/6000/9000, SKM D1/AVX, SL Handheld DW, nickel
618.00 EUR
store
local_shipping
Neumann
MNV 100
Tilting clamp for microphone auditorium hanger, black
173.00 EUR
store
local_shipping
Neumann
MNV 21 mt
Tilting clamp with suspension cable, for KM system and KMR 81, black
92.00 EUR
store
local_shipping
Neumann
MNV 87
Tilting clamp with suspension cable, rotatable 1/2" threaded bolt, nickel"
309.00 EUR
store
local_shipping
Neumann
MNV 87 mt
Tilting clamp with suspension cable, rotatable 1/2" threaded bolt, black"
309.00 EUR
store
local_shipping
Rycote
Modular Mono Windshield MWS 9 Kit (MZL)
The WS 9 Modular Windshield Kit for Sennheiser MKH8020, 8040 and 8050 Mic by Rycote off...
827.00 EUR
store
local_shipping
Rycote
Modular Windshield WS 1 Kit
The Rycote Windshield Kit # 1 is a complete modular microphone windshield system includ...
781.00 EUR
store
local_shipping
Rycote
Modular Windshield WS 1 Kit (MZL)
The Modular Windshield WS 1 Kit MZL for the Sennheiser MKH 8060 Microphone from Rycote...
918.00 EUR
store
local_shipping
INFO
Rycote
Modular Windshield WS 10 Kit
The Rycote Windshield Kit #10 is a complete modular microphone windshield system includ...
781.00 EUR
store
local_shipping
INFO
Rycote
Modular Windshield WS 11 Kit
The Rycote Windshield Kit #11 is a complete modular microphone windshield system config...
873.00 EUR
store
local_shipping
INFO
Rycote
Modular Windshield WS 2 Kit
The Rycote Windshield Kit #2 is a complete modular microphone windshield system includi...
781.00 EUR
store
local_shipping
Rycote
Modular Windshield WS 2 Kit (MZL)
The Rycote Windshield Kit #2-MZL is a complete modular microphone windshield system inc...
918.00 EUR
store
local_shipping
INFO
Rycote
Modular Windshield WS 295 Kit
The Rycote Windshield Kit #295 is a complete modular microphone windshield system inclu...
781.00 EUR
store
local_shipping
INFO
Rycote
Modular Windshield WS 3
Modular Windshield Kit 3 (30mm, No CB) Suitable for Neumann RSM191.
735.00 EUR
store
local_shipping
INFO
Rycote
Modular Windshield WS 3 Kit
Full windshield 3 kit comprising medium modular suspension with connbox 1, windshield 3 and drawstring windjammer 3.
781.00 EUR
store
local_shipping
Rycote
Modular Windshield WS 3 Kit (XLR-5F)
The Modular Windshield Kit WS 3 with XLR-5F and Connbox CB4 from Rycote provides you wi...
827.00 EUR
store
local_shipping
Rycote
Modular Windshield WS 4 Kit
The Rycote Windshield Kit #4 is a complete modular microphone windshield system includi...
781.00 EUR
store
local_shipping
Rycote
Modular Windshield WS 4 Kit (XLR-5F)
The Modular Windshield WS 4 Kit (XLR-5F) from Rycote provides you with the accessories...
873.00 EUR
store
local_shipping
INFO
Rycote
Modular Windshield WS 5 Kit
The Rycote Windshield Kit #5 is a complete modular microphone windshield system includi...
873.00 EUR
store
local_shipping
Rycote
Modular Windshield WS 5 Kit (XLR-5F)
The 086013 Windshield Kit 5L is a complete modular microphone windshield system for the...
918.00 EUR
store
local_shipping
INFO
Rycote
Modular Windshield WS 6 Kit
The Rycote Windshield Kit #6 is a complete modular microphone windshield system includi...
873.00 EUR
store
local_shipping
Rycote
Modular Windshield WS 6 Kit (XLR-5F)
Modular Windshield Kit suitable for stereo microphones from 351mm up to 400mm in length and 19-34mm diameter with a 5-pin XLR connector.
918.00 EUR
store
local_shipping
INFO
Rycote
Modular Windshield WS 7 Kit
The Rycote Windshield Kit # 7 is a complete modular microphone windshield system includ...
873.00 EUR
store
local_shipping
INFO
Rycote
Modular Windshield WS 8 Kit
Complete modular microphone windshield system including the Rycote modular suspension mount, windjammer, windshield and necessary extensions.
873.00 EUR
store
local_shipping
Rycote
Modular Windshield WS 8J Kit
Modular windshield WS 8J kit for Sennheiser MKH 8070
873.00 EUR
store
local_shipping
INFO
Rycote
Modular Windshield WS 9 Kit (LEMO)
The WS 9 Modular Windshield Kit (Lemo) Complete Windshield and Suspension System by Ryc...
781.00 EUR
store
local_shipping
INFO
Rycote
Modular Windshield WS 9 Kit (no CB)
The WS 9 Modular Windshield Kit with No Connbox by Rycote offers a unique and highly ef...
735.00 EUR
store
local_shipping
INFO
Audix
MOUNT TABLE FLANGE FOR ADX-GNECK PODS
MOUNT TABLE FLANGE FOR ADX-GNECK PODS...
31.00 EUR
store
local_shipping
INFO
Quik Lok
MP-840 Plastic Mic Clip
Large Rubber Mic Clip for Wireless Microphones.
2.69 EUR
store
local_shipping
Quik Lok
MP-850 Rubber Mic Clip
Large Rubber Mic Clip for Wireless Microphones.
3.94 EUR
store
local_shipping
Quik Lok
MP-890 Rubber Mic Clip
Large Rubber Mic Clip for WIreless Microphones.
3.07 EUR
store
local_shipping
Quik Lok
MP-891 Mic Holder
Shock-proof mic holder, Isolates microphone from stand and stage vibrations.
4.99 EUR
store
local_shipping
Quik Lok
MP-892 Rubber Mic Clip
Small Rubber Mic Clip, plastic.
2.98 EUR
store
local_shipping
Quik Lok
MP-900
Dual mic holder. This adapter allows 2 microphones to be placed on the same stand.
32.00 EUR
store
local_shipping
Rolls
MP13
The MP13 is a small, simple, and inexpensive microphone pre amplifier for a variety of...
137.00 EUR
store
local_shipping
INFO
Hosa
MPA-149 Microphone Preamp
Active, in-line mic preamp that provides +26dB of gain to any low-output dynamic, or passive ribbon microphone
96.00 EUR
store
local_shipping
Platinum
MPC1BK Microphone Arm
Microphone arm, fully flexible, with table mount clamp
Our MEINL Percussion Microphone Clamp Cymbal Set is flexible and gives you the option o...
124.00 EUR
store
local_shipping
Gatt Audio
Uudis
MPS-20 Metal Pop Screen Gooseneck
Pop filter, metal, 14 x 12 cm, gooseneck. Ensures minimal distortion caused by explosive consonants such as “P” and “B”, so your recordings remain clear and crisp.
19.00 EUR
store
local_shipping
RTX
MPSX
This RTX MPSX microphone stand is very complete and sturdy but still very affordable. E...
50.00 EUR
store
local_shipping
RTX
MPX
This RTX MPX microphone standard is very complete and sturdy but still very affordable...
58.00 EUR
store
local_shipping
Gravity
MS 0200
Record a vocal track or podcast at your desk without setting up a microphone stand - or...
25.00 EUR
store
local_shipping
INFO
Gravity
MS 2 WP
2.3 kg cast iron weight plateFits Gravity round base mic standsFor increase...
24.00 EUR
store
local_shipping
INFO
Gravity
MS 2222 B
Premium-quality microphone stand with boom. 480-730mm, boom max 880mm, baseplate 270 mm. 4 kg.
51.00 EUR
store
local_shipping
Gravity
MS 23
Microiphone stand with round base, steel, 1000-1600mm, 270mm base, black, 4.2 kg.
77.00 EUR
store
local_shipping
Gravity
MS 23 W
Microiphone stand with round base, steel, 1000-1600mm, 270mm base, white, 4.2 kg.
81.00 EUR
store
local_shipping
Gravity
MS 23 XLR B
XLR gooseneck for direct microphone attachmentXLR mic cable input at the bottom e...
73.00 EUR
store
local_shipping
Gravity
MS 231 HB
Straight microphone stand withheavy-duty base, single-handed height adjustment, 1080-1750 mm, 270mm base, 4.4 kg.
48.00 EUR
store
local_shipping
Gravity
MS 2321 B
Solid and durable constructionHeavy duty base2-point boom adjustmentE...
53.00 EUR
store
local_shipping
Gravity
MS 2322 B
Solid and durable constructionHeavy duty base2-point boom adjustmentE...
51.00 EUR
store
local_shipping
Gravity
MS 3122 HDB
Microphonestand for drums and desktop. Max 320mm, boom max 880 mm, tripod, 2.84 kg.
48.00 EUR
store
local_shipping
Gravity
MS 4221 B
Solid and durable constructionHeavy duty zinc die-cast base2-point boom adj...
84.00 EUR
store
local_shipping
INFO
Gravity
MS 4222 B
Short microphone stand with collapsible base and 2-point adjustment. Telescopic boom. 510-740 mm, boom 510-880 mm. 2.2 kg.
45.00 EUR
store
local_shipping
Gravity
MS 43
Solid and durable constructionHeavy duty zinc die-cast baseErgonomic handli...
74.00 EUR
store
local_shipping
Gravity
MS 431 HB
Microphone stand, foldable and one-handed, 1010-1790 mm, steel, black. transport length 1010mm, 2.6 kg.
87.00 EUR
store
local_shipping
Gravity
MS 4321 B
Solid and durable constructionHeavy duty zinc die-cast base2-point boom adj...
88.00 EUR
store
local_shipping
Gravity
MS 4322 B
Solid and durable constructionHeavy duty zinc die-cast base2-point boom adj...
47.00 EUR
store
local_shipping
Gravity
MS 4322 HDB
Solid and durable constructionWeighted legs of solid steel and die-cast zinc leg...
52.00 EUR
store
local_shipping
Gravity
MS 4322 W
Solid and durable constructionHeavy duty zinc die-cast base2-point boom adj...
51.00 EUR
store
local_shipping
Gravity
MS 5311 B
Every bit of weight counts when you're travelling by plane or truck from one gig to the...
48.00 EUR
store
local_shipping
Gravity
MS B 21
80 cm boom armCast aluminium hub with 3/8" male thread2-point tilt and posi...
41.00 EUR
store
local_shipping
Gravity
MS B 22
Telescoping boom arm with quick fastenerMaximum length 88 cmCast aluminium...
47.00 EUR
store
local_shipping
Gravity
MS CAB CL 01
Lightweight and compactPrecise and secure mic placementVariable depth...
75.00 EUR
store
local_shipping
Gravity
MS CAB CL 01 S
Lightweight and compactPrecise and secure mic placementVariable depth...
75.00 EUR
store
local_shipping
Gravity
MS CLMP 25
Holds microphones firmly in place´Attaches to all mic standsSwivel he...
8.00 EUR
store
local_shipping
Gravity
MS CLMP 34
Firmly holds wireless microphones with shaft diameters from 3...
Straightforward design for basic stereo micingSuitable...
23.00 EUR
store
local_shipping
Gravity
MS STB 01 PRO
Stereo array bar for 2 microphonesAdjustable microphone...
87.00 EUR
store
local_shipping
Gravity
MS STB 02
The Gravity Stereo Bar 02 allows you to mount two microphones on a single microphone st...
37.00 EUR
store
local_shipping
Gravity
MS TBA 01
Boom arm for attachment to desks, tubes, etc.Flexible orientation in any position...
63.00 EUR
store
local_shipping
Gravity
MS TM 1 B
Microphone holder for table tops, podiums etc.3/8" threaded boltPlastic tip...
18.00 EUR
store
local_shipping
Gravity
MS U CLMP
Show starts in an hour, people are waiting, you are setting the stage and you feel the...
10.00 EUR
store
local_shipping
Gravity
MS W 22
Telescoping boom arm with quick fastenerMaximum length 88 cmCast aluminium...
54.00 EUR
store
local_shipping
Quik Lok
MS-326 Clamp-on beverage holder
Solid metal holder for bottles, glasses, cans and cups. Attaches to microphoneand sheet music stands with tubing diameter of up to 30 mm
20.00 EUR
store
local_shipping
INFO
Quik Lok
MS-327 Headphone Holder
Clever, safe and practical headphone holder. Can be securely anchored to any table top surface, and microphone/sheet music/keyboard/mixer stands of any shape and size ranging from 14 to 48 mm.
15.00 EUR
store
local_shipping
INFO
Quik Lok
MS-329 Clamp-on Utility Tray
Large Clamp-on Utility Tray Tray dimensions: Depth: 8.4" - 21.3cm...
29.00 EUR
store
local_shipping
Tuff Stands
MS-34 Table Stand Mic
Stable table microphone stand in metal. Has thread for microphone holder. Table microphone stand. Foldable foot. 1.5 cm (5/8") thread for microphone holder.
18.00 EUR
store
local_shipping
Tuff Stands
MS-49
Boom-arm microphone stand in robust quality and lightweight design. With 5/8'' thread, which can be used on the vast majority of microphone holders. Can be attached to a tabletop up to 5 cm thick.
39.00 EUR
store
local_shipping
Tuff Stands
MS-59
Microphone boom for mounting on a table top. Flexible and adjustable in two axes. Rotates 360 degrees. Reduction thread for microphone holder and cable ties included.
55.00 EUR
store
local_shipping
Hercules
MS100B Plus
Microphone stand, extra low, straight, h-shaped foot, EZ Grip height adjustment, EX Clip microphone holder included, black. 305 - 400mm, 1.7 kg.
31.00 EUR
store
local_shipping
Rolls
MS111
The ROLLS MS111 is a general purpose muting switch for microphones. The MS111 will pass...
108.00 EUR
store
local_shipping
Hercules
MS120B Microphone Stand
The HERCULES Low Profile Mic Stand MS120B with telescoping boom is ideal for drum and a...
50.00 EUR
store
local_shipping
Hercules
MS120B PRO
Microphone stand, extra low, telescopic boom, h-shaped foot, robust, black. 317 - 406mm, 3.7 kg.
Tripod Base Hideaway Boom Stand, easily be converted to a boom or straight stand, 1070 - 2400mm.
69.00 EUR
store
local_shipping
INFO
Hercules
MS540B
Low Profile Mic Stand with telescoping boom is ideal for drum and amp microphone applications. This stand also features a folding tripod base.
48.00 EUR
store
local_shipping
Tama
MS6110SHP
Square head bolt 110mm - 2pcs...
7.00 EUR
store
local_shipping
Tama
MS734ELBK
Extra Low Telescoping Boom Stand, black. 325mm.
136.00 EUR
store
local_shipping
Tama
MS736BB
Tama MS736 Ironworks Boom Arm...
82.00 EUR
store
local_shipping
INFO
Tama
MS736BK
Details:Black Finish•Vice-Grip Boom Tilter•Iron-Core Legs with Vi...
130.00 EUR
store
local_shipping
Tama
MS736LBK
Details:Black FinishVice-Grip Boom TilterIron-Core Legs with Vibration-Isol...
130.00 EUR
store
local_shipping
Tama
MS736RELBK
Iron Works Low Microphone Stand with Telescopic Boom, Round Base. Studio Series. 280mm, 505mm - 850mm boom.
136.00 EUR
store
local_shipping
Tama
MS737BK
Extra Long Boom Stand, black.
128.00 EUR
store
local_shipping
INFO
Hosa
Uudis
MSB-382BK Short Microphone Stand
Short microphone stand. Tripod-leg base for better stability. Telescopic boom for better microphone placement. Slim design for low visibility on stage. Black. Height: 540 mm. Boom: 530–910 mm.
72.00 EUR
store
local_shipping
INFO
Rolls
MSC106
Mounting bracket with clamp to attach smaller Rolls units to a mic stand
42.00 EUR
store
local_shipping
Gravity
MSQC 1 TB
Quick coupler crownFacilitates effortless swapping of mic clips and boomsAl...
7.00 EUR
store
local_shipping
Gravity
MSQT 1 B
All-metal quick tilt ball joint mic adapter90° maximum tilt360° rot...
34.00 EUR
store
local_shipping
Gravity
MST 01 B
Table top microphone stand consists of a heavy yet compact die-cast base and a steel tube. Straight, max 130mm, baseplate 130mm, 1.26 kg.
45.00 EUR
store
local_shipping
Lewitt
Kampaaniad
MTP 40 MCs Microphone clip for MTP Series
Snap-in handheld microphone clip. Compatible with 3/8" and 5/8" threads. ...
17.00 EUR 20.00 EUR
store
local_shipping
Auralex
Kampaaniad
MudGuard [1 pcs left]
The Auralex MudGuard isolates your mic by eliminating external noise bleed and filterin...
129.00 EUR 168.00 EUR
store
local_shipping
DPA
Multi Adjustable Headset Mount Beige
Lightweight headset mount for the DPA Refine headset or earset microphone (sold separately). Beige.
138.00 EUR
store
local_shipping
INFO
DPA
Multi Adjustable Headset Mount Black
Lightweight headset mount for the DPA Refine headset or earset microphone (sold separately). Black.
138.00 EUR
store
local_shipping
INFO
Neumann
MZ 49 A
Shock Mount for M 49 V
503.00 EUR
store
local_shipping
Sennheiser
MZA 900 P
Phantom power adapter, 48 V phantom power, EW jack socket, 3-pin XLR-M, black
192.00 EUR
store
local_shipping
Sennheiser
MZA 900 P-4
Phantom power adapter, 48 V phantom power, 3-pin SE socket jack, 3-pin XLR-M, black
193.00 EUR
store
local_shipping
Sennheiser
MZC 1-1 GOLD
Small frequency cap for SL Headmic 1, gold"
12.00 EUR
store
local_shipping
Sennheiser
MZC 1-1 GREY
Small frequency cap for SL Headmic 1, grey
12.00 EUR
store
local_shipping
Sennheiser
MZC 1-2 GOLD
Large frequency cap for SL Headmic 1, gold"
12.00 EUR
store
local_shipping
Sennheiser
MZC 1-2 GREY
Capuchon de fréquence large pour SL Headmic 1, gris
12.00 EUR
store
local_shipping
Sennheiser
MZC 30
Connection cable for ME 34/35/36, 9m long, 3-pin XLR-M, 12-48 V phantom power, black
193.00 EUR
store
local_shipping
Sennheiser
MZC 30 W
Connection cable for ME 34/35/36, 9m long, 3-pin XLR-M, 12-48 V phantom power, white
215.00 EUR
store
local_shipping
Sennheiser
MZE 8060
60 cm extension tube for MKH 8030
412.00 EUR
store
local_shipping
Sennheiser
MZE 8120
120 cm extension tube for MKH 8030
463.00 EUR
store
local_shipping
Sennheiser
MZEF 8060
Rod for MKH 8000, length: 60cm, 3/8" tripod thread, Nextel black"
103.00 EUR
store
local_shipping
Sennheiser
MZEF 8120
Rod for MKH 8000, length: 120 cm, 3/8" tripod thread, Nextel black"
154.00 EUR
store
local_shipping
Sennheiser
Uudis
MZF 8000 II
Professional in-line low-cut filter for MKH 8000 series, Reduces wind and handling noise, Preserves natural sound character, Rugged metal construction, XLR connection, Approx. 70Hz cutoff frequency, approx. 45g.
Microphone stand, tripod, 80 cm high, upper 3-pin XLR-F (screw-on), lower 3 pin XLR-M, black
312.00 EUR
store
local_shipping
Sennheiser
MZFS 8000
Floor stand with damping ring for MKH 8000, round, 3/8" tripod thread, Nextel black"
288.00 EUR
store
local_shipping
Sennheiser
MZG 8000
Swivel joint for MKHC 80xx (in conjunction with MZX 8000), system plug-> system socket, Nextel black
257.00 EUR
store
local_shipping
Sennheiser
MZGE 8000
Tube connector to connect a vertical bar MZEF 8xxx with an extension tube MZE 8xxx.
257.00 EUR
store
local_shipping
Sennheiser
MZH 20-1
Windscreen cover for basket windscreen MZW 20-1
257.00 EUR
store
local_shipping
Sennheiser
MZH 200
Furry windshield designed for MKE 200 to protect against wind noise for outdoor applications.
20.00 EUR
store
local_shipping
Sennheiser
MZH 400
Furry windshield designed for MKE 400 to protect against wind noise for outdoor applications.
20.00 EUR
store
local_shipping
Sennheiser
MZH 440
Fur windscreen for MKE 440
50.00 EUR
store
local_shipping
Sennheiser
MZH 60-1
Windscreen cover for basket windscreen MZW 60-1
233.00 EUR
store
local_shipping
Sennheiser
MZH 600
Fur windscreen for MKE 600
50.00 EUR
store
local_shipping
Sennheiser
MZH 604
Drum clip for e 604 and e 904, black
40.00 EUR
store
local_shipping
Sennheiser
MZH 70-1
Windscreen cover for basket windscreen MZW 70-1
257.00 EUR
store
local_shipping
Sennheiser
MZH 80-1
Windscreen cover for basket windscreen MZW 80-1
229.00 EUR
store
local_shipping
Sennheiser
MZH 8000
Ceiling mount for MKHC 80xx (in conjunction with MZL 80xx), with cable guide, Nextel black
133.00 EUR
store
local_shipping
Sennheiser
Uudis
MZH 8042
Professional figure-8 capsule for MKH 8000 series, Optimized for MS and Blumlein recording, Extremely low self-noise, Precise side pickup, Linear frequency response, 30Hz-20000Hz, approx. 45g.
260.00 EUR
store
local_shipping
Sennheiser
MZH 908 B
Instrument clip for e 908, black
40.00 EUR
store
local_shipping
Sennheiser
MZH 908 D
Drum clip for e 908, black
40.00 EUR
store
local_shipping
Sennheiser
MZL 8003
Extension cord for MKH 8000, length: 3m, system plug -> system socket, black
154.00 EUR
store
local_shipping
Sennheiser
MZL 8010
Extension cord for MKH 8000, length: 10 m, system plug -> system socket, black
206.00 EUR
store
local_shipping
Sennheiser
MZP 40
Close-talking protection with gooseneck stand, Ø 13cm, black
Metal table stand for MKHC 80xx, with cable 1.5m, Nextel black
412.00 EUR
store
local_shipping
Sennheiser
MZW 20-1
Basket windscreen for MZS 20-1, compatible with MKH 20, MKH 40, and MKH 50
297.00 EUR
store
local_shipping
Sennheiser
MZW 36
Windscreen for ME 36, black, with logo
9.00 EUR
store
local_shipping
Sennheiser
MZW 415-ANT
Windscreen for MKH 416, anthracite
61.00 EUR
store
local_shipping
Sennheiser
MZW 44 BE
Windshield accessory for Headmic 4 in the color beige
9.00 EUR
store
local_shipping
Sennheiser
MZW 44 BK
Windshield accessory for Headmic 4 in the color black
9.00 EUR
store
local_shipping
Sennheiser
MZW 60-1
Basket windscreen for MZS 20-1, compatible with MKH 60 and MKH 416
305.00 EUR
store
local_shipping
Sennheiser
MZW 61
Windscreen for MKH 60, includes labeling kit (8 colors), anthracite
122.00 EUR
store
local_shipping
Sennheiser
MZW 70-1
Basket windscreen for MZS 20-1, compatible with MKH 70
391.00 EUR
store
local_shipping
Sennheiser
MZW 71
Windscreen for MKH 70, includes labeling kit (8 colors), anthracite
173.00 EUR
store
local_shipping
Sennheiser
MZW 80-1
Basket windscreen for MZS 20-1, compatible with MKH 8070
412.00 EUR
store
local_shipping
Sennheiser
MZW 80-ANT
Windscreen for MKH 80, MKH 800, and MKH 800 Twin, anthracite
50.00 EUR
store
local_shipping
Sennheiser
MZW 8000
Windscreen for MKHC 8020/8040/8050, dual layer, anthracite
20.00 EUR
store
local_shipping
Sennheiser
MZX 8000
XLR module for MKH 8000, 3-pole XLR-M, NEXTEL black
253.00 EUR
store
local_shipping
Neumann
N 149 A
Power supply for tube microphones, DIN-8F (microphone), XLR-3 M, 100-240 VAC, EU power cord
1287.00 EUR
store
local_shipping
Neumann
N 248
Power supply, 48V phantom for 2 microphones, remote control for TLM 170R, 2 x XLR-3F, 2 x XLR-3M, 230 VAC
842.00 EUR
store
local_shipping
Rycote
Nagra Mezzo Mini Windjammer
Protects Nagra Mezzo from Wind Noise Made of Synthetic Fur Slip-On Design...
49.00 EUR
store
local_shipping
INFO
Rycote
Neoprene coated Lavalier Foam
The Rycote Neoprene Lavalier Foam Windscreen is a single, water-resistant windscreen de...
20.00 EUR
store
local_shipping
INFO
Rycote
Neoprene-coated Mini Lavalier Foam
The Rycote Neoprene Mini-Lavalier Foam Windscreen is a single, water-resistant windscre...
23.00 EUR
store
local_shipping
INFO
Rycote
Neumann TLM 102 Foam (Single)
This Foam Windscreen from Rycote is designed to fit the Neumann TLM-102 large diaphragm...
30.00 EUR
store
local_shipping
INFO
Rycote
Neumann TLM 103 Foam (Single)
Protect your large diagram microphone from wind noise and the elements with the Rycote...
30.00 EUR
store
local_shipping
Rycote
Neumann TLM 103 MiniWindjammer
Mini Windjammer Neumann for TLM 103
53.00 EUR
store
local_shipping
Neumann
NM V
Pattern Control Unit for M 49 V
1802.00 EUR
store
local_shipping
Nomad
NMS-6606
33.00 EUR
store
local_shipping
Røde
NT45-C
Compatible microphones :NT4NT5NT55NT6...
114.00 EUR
store
local_shipping
INFO
Røde
NT45-O
Compatible microphones :NT4NT5NT55NT6...
114.00 EUR
store
local_shipping
INFO
Neumann
NU 67
Power supply for U 67
1673.00 EUR
store
local_shipping
Austrian Audio
OC707-WL1
OC707 active condenser microphone capsule for Shure wireless systems.
470.00 EUR
store
local_shipping
Austrian Audio
OCH1 Mic Clip
OCH1 Mic Clip for Handheld Mics
37.00 EUR
store
local_shipping
INFO
Austrian Audio
OCH8 Holder
OCH8 Holder...
37.00 EUR
store
local_shipping
Austrian Audio
OCP8 Pop Filter
OCP8 Pop Filter...
55.00 EUR
store
local_shipping
Austrian Audio
OCR8 Bluetooth Remote
The mic of the futureA true innovation for your studio. Use the OCR8 Bluetooth re...
140.00 EUR
store
local_shipping
Austrian Audio
OCS8 Shockmount
Shockmount for OC818 and OC18...
95.00 EUR
store
local_shipping
RME
OctaMic II
The OctaMic II provides 8-Channel 192 kHz / 24 bit AD conversion with eight hi-class mi...
1493.00 EUR
store
local_shipping
INFO
Austrian Audio
OCW8 Windshield
High-quality foam windshield specifically designed for OC818 and OC18 condenser microphones
38.00 EUR
store
local_shipping
Austrian Audio
OD505 WL1
OD505 active condenser microphone capsule for Shure wireless systems.
248.00 EUR
store
local_shipping
Rycote
Olympus LS-05/LS-10/LS-11/LS-12/LS-14 Wjammer mini
This Rycote Mini Windjammer is designed to fit the Olympus LS 10 and LS 11 portable rec...
50.00 EUR
store
local_shipping
INFO
Rycote
Olympus LS-3 Mini Windjammer
This Rycote Mini Windjammer is designed to fit the Yamaha POCKETRAK C24 portable record...
50.00 EUR
store
local_shipping
INFO
Rycote
Overcovers ADV Beige 10x25-pack
Box of 10 packs of 25 round 23mm Stickies with 5 re-usable 26mm fur covers
184.00 EUR
store
local_shipping
INFO
Rycote
Overcovers ADV BEIGE 25-pack
This is a pack of 5 black Overcovers with 25 Round Stickies. Overcovers use Ryc...
20.00 EUR
store
local_shipping
INFO
Rycote
Overcovers ADV BLACK 10x25-pack
This is a pack of 5 black Overcovers with 25 Round Stickies. Overcovers use Ryc...
184.00 EUR
store
local_shipping
INFO
Rycote
Overcovers ADV BLACK 25-pack
This is a pack of 5 black Overcovers with 25 Round Stickies. Overcovers use Ryc...
20.00 EUR
store
local_shipping
Rycote
Overcovers ADV Fur Discs Beige 100
100-pack of Beige Overcovers Advanced, Fur Discs for Lavalier Microphones
92.00 EUR
store
local_shipping
INFO
Rycote
Overcovers ADV Fur Discs Grey 100
The grey, 100-pack of Overcovers Advanced, Fur Discs for Lavalier Microphones...
92.00 EUR
store
local_shipping
INFO
Rycote
Overcovers ADV Fur Discs White 100
The white, 100-pack of Overcovers Advanced, Fur Discs for Lavalier Microphone...
92.00 EUR
store
local_shipping
INFO
Rycote
Overcovers ADV GREY 10x25-pack
This is a pack of 5 black Overcovers with 25 Round Stickies. Overcovers use Ryc...
184.00 EUR
store
local_shipping
INFO
Rycote
Overcovers ADV GREY 25-pack
This is a pack of 5 black Overcovers with 25 Round Stickies. Overcovers use Ryc...
20.00 EUR
store
local_shipping
INFO
Rycote
Overcovers ADV White 10x25-pack
This is a pack of 10 Overcovers Advanced with 250x stickies and 50 fur disks.
184.00 EUR
store
local_shipping
INFO
Rycote
Overcovers ADV White 25-pack
This is a pack of 5 white Overcovers with 25 Round Stickies.
20.00 EUR
store
local_shipping
INFO
Xvive Audio
P1 Portable Phantom Power Supply
The Xvive P1 Portable Phantom Power Supply is a low-noise, 12V / 48V power supply. It r...
59.00 EUR
store
local_shipping
INFO
Xvive
P58R Receiver pedal only
Pedal-format receiver with chromatic tuner for the P58 5.8 GHz wireless system.
156.00 EUR
store
local_shipping
INFO
Neumann
PA 100 pistonphone adapter
Pistonphone adapter for dummy head KU 100, black
92.00 EUR
store
local_shipping
Rycote
Pair 3/8" TIPS F/PCS Boom Connector
Tips attach and release into the Rycote PCS-Boom Connector (available separately)...
50.00 EUR
store
local_shipping
Rycote
Pair of Single Lyre 72 Upgrade Black (19/25)
Pair of Single Lyre 72 (19/25) (with premodular adaptor & screws)...
37.00 EUR
store
local_shipping
Rolls
PB223
Två kanals fantommatning för kondensatormikrofoner. 48V
142.00 EUR
store
local_shipping
INFO
Rolls
PB224
Perfect for any condenser microphone, the new PB224 powers even the high-current draw m...
179.00 EUR
store
local_shipping
INFO
Rolls
PB23
One channel phantom power for condenser microphones. 48V
106.00 EUR
store
local_shipping
Rycote
PCS Classic Adaptor
Rycote Classic adaptor for PCS-Boom connector, incl. XLR holder ...
64.00 EUR
store
local_shipping
INFO
Rycote
PCS-Artic Arm
Designed for professional boom pole use. Compatible with any 3/8inch threaded boom pole. Intuitive and incredibly easy attachment and release mechanism.
147.00 EUR
store
local_shipping
Rycote
PCS-Artic Arm Kit Micro
Professional variable friction arm kitSolid aluminium arm for maximum strength an...
156.00 EUR
store
local_shipping
Rycote
PCS-Artic Arm With Super Clamp
PCS-Artic Arm With Super ClampPerfect versatility for precise positioning of mics...
156.00 EUR
store
local_shipping
Rycote
PCS-Sound Stand Kit PCS-U 3/8"
PCS-Sound Stand 3/8in PCS-U Kit
165.00 EUR
store
local_shipping
Rycote
PCS-Sound Stand Mini 3/8"
The PCS Sound Stand 3/8” features a durable aluminium 2 section column with a uni...
60.00 EUR
store
local_shipping
Rycote
PCS-Stand Base Kit PCS-U 3/8"
Mount microphones close to the floorFast set up, folds flatUnique 3/8&rdquo...
129.00 EUR
store
local_shipping
Rycote
PCS-Stand Base Mini 3/8"
Mount microphones close to the floorFast set upFolds flatUnique 3/8&r...
41.00 EUR
store
local_shipping
Audix
PD-133
Pop filter for 5/8“ microphone stand/11” gooseneck
51.00 EUR
store
local_shipping
AKG
PF 80
Universal pop screen for vocal-recording microphones...
34.00 EUR
store
local_shipping
Pulse
PF-03 Popfilter
Pulse Popfilter PF-03...
24.00 EUR
store
local_shipping
INFO
Lewitt
PF-XL
Dual-layer magnetic pop filter to effectively reduce pop and hiss sounds, Acoustically transparent, Suitable for shock mount XL (LCT 1040, Pure Tube).
112.00 EUR
store
local_shipping
Pulse
PF36
An acoustic screen which gives you the ability to do pure voice recordings in any room...
82.00 EUR
store
local_shipping
Røde
PG1 Cold Shoe Pistol Grip
The PG1 Cold Shoe Pistol Grip is a convenient and ergonomic way to operate your RODE VideoMic or Stereo VideoMic independently of your video camera.
23.00 EUR
store
local_shipping
TritonAudio
Phantom blocker
Blocks Phantom power, not the signalPhantom blocker blocks Phant...
63.00 EUR
store
local_shipping
INFO
ART
Phantom I
ARTcessories - a full line of clever, affordable processing tools for live sound, stage...
71.00 EUR
store
local_shipping
ART
Phantom II Pro
Use the ART Phantom II Pro to give your condenser microphones the clean, reliable phant...
88.00 EUR
store
local_shipping
Rycote
Pistol Grip Handle with Lever
The Rycote Pistol Grip with Ratchet Lever is designed for use with the Modular Suspensi...
39.00 EUR
store
local_shipping
INFO
Røde
Pivot adapter
Pivot Adaptor is a durable machined-aluminium, brass and high-grade polymer adaptor for mounting on boom stands and boompoles, allowing for up to 210 degrees of pivot. A 5/8" to 3/8" adaptor is included.
53.00 EUR
store
local_shipping
Proel
Välkmüük
PLADT01
Die cast aluminium adapter, suitable for PL8545 lighting stand and all other stands with Ø 35 mm end tube, with reduction to Ø 28 mm. Black colour.
67.00 EUR 86.00 EUR
store
local_shipping
Shure
Podcast Boom Mic Stand
Deluxe Articulating Desktop Microphone Boom Stand, C-Clamp for Surface Mounting, Integrated Cable Management, Threaded Extension Adapter, Arm Length 81.92 cm,Total Reach 102.87 cm, 1.9 kg.
131.00 EUR
store
local_shipping
Rycote
Pop Filter Spare Foam (pack of 5)
The InVision Universal Pop Filter Foam (5-Pack) by Rycote is a pack of five custom mesh...
20.00 EUR
store
local_shipping
INFO
Rycote
Portable Recorder Suspension
The 041119 Portable Recorder Suspension from Rycote is a compact and versatile suspensi...
92.00 EUR
store
local_shipping
INFO
Rycote
Portable Recorder Suspension HD [041130]
The Rycote Portable Recorder Suspension HD features a Lyre-based design and is built to...
92.00 EUR
store
local_shipping
DAP Audio
PRE-202
2 channel solution for microphones
157.00 EUR
store
local_shipping
Dinkum
PRO Lens Shade Screw Mount
The Pro Screw Mount Lens Shade is the french flag of choice...
56.00 EUR
store
local_shipping
ART
Pro MPA II
ART's Pro MPA-II is a value-packed 2-channel tube microphone preamplifier. It's loaded...
542.00 EUR
store
local_shipping
INFO
Prodipe
Pro Pop Shield
Universal popfilter that can be attached to many stands.
27.00 EUR
store
local_shipping
Proel
PRO100BK
Microphone stand, pro, 950-1600 mm, 750mm boom, tripod, black, 3.3 kg.
62.00 EUR
store
local_shipping
INFO
Proel
PRO100CR
Microphone stand, pro, 950-1600 mm, 750mm boom, tripod, chrome, 3.3 kg.
83.00 EUR
store
local_shipping
Nedis
Professional Preamplifier Microphone - RCA
This compact professional preamplifier is specially designed for adding a turntable to...
51.00 EUR
store
local_shipping
Sennheiser
Profile Table Stand
Durable table stand with 3/8” and 5/8” mounting options
30.00 EUR
store
local_shipping
Prodipe
Promic Professional Mic Stand
Professional microphone stand, tripod legs, adjustable boom. Black. 81 to 140 cm. 77 cm boom.
Allowing you to send a single microphone or DI signal to up...
175.00 EUR
store
local_shipping
Proel
Välkmüük
PRORF02 Universal Home Studio Reflection filter
Lightweight recording/home studio acoustic diffuser screen, universal 5/8" thread to be attached to a straight microphone stand.
149.00 EUR 191.00 EUR
store
local_shipping
Prodipe
Protripod Tripod Microphone Table
Install your mic where you want. Table microphone stand.
15.00 EUR
store
local_shipping
Neumann
PS 15
Pop screen with tube clamp, Ø 13 cm, black
120.00 EUR
store
local_shipping
Neumann
PS 20 a
Pop screen with tube clamp, Ø 20cm, black
130.00 EUR
store
local_shipping
Gatt Audio
Uudis
PS-2 Pop Screen Gooseneck
Pop shield, with strong microphone stand clamp, replaceable nylon filter, diameter of 15 cm, mounted on a 35 cm long gooseneck.
38.00 EUR
store
local_shipping
Shure
PS-6
The Shure PS-6 pop filter reduces noise due to plosive "p" and "b" sounds. The filter f...
54.00 EUR
store
local_shipping
Røde
PSA-1
Studio boom arm for radio, broadcast, studio and home use. For permanent mounting or table-clamp. Suitable for most microphones with a weight of 700-1100 grams.
102.00 EUR
store
local_shipping
Røde
B-Stock
PSA-1 [B-STOCK]
[B-STOCK] Customer return as good as new. Only unpacked and tested. Full guarantee. Original box.
119.00 EUR 149.00 EUR
store
local_shipping
Røde
PSA-1+
Professional studio boom arm for podcasters, streamers and broadcasters. Works with all usual microphones and shockmounts. Silent, stable, 3/8" + 5/8", max load 1200g.
170.00 EUR
store
local_shipping
Røde
PSA-1+ Blue
Studio boom arm for radio, broadcast, studio and home use. For permanent mounting or table-clamp. Suitable for most microphones with a weight of 700-1100 grams, Blue
170.00 EUR
store
local_shipping
Røde
PSA-1+ Green
Studio boom arm for radio, broadcast, studio and home use. For permanent mounting or table-clamp. Suitable for most microphones with a weight of 700-1100 grams, Green
170.00 EUR
store
local_shipping
Røde
PSA-1+ Orange
Studio boom arm for radio, broadcast, studio and home use. For permanent mounting or table-clamp. Suitable for most microphones with a weight of 700-1100 grams, Orange
170.00 EUR
store
local_shipping
Røde
PSA-1+ Pink
Studio boom arm for radio, broadcast, studio and home use. For permanent mounting or table-clamp. Suitable for most microphones with a weight of 700-1100 grams, Pink
170.00 EUR
store
local_shipping
Røde
PSA-1+ Purple
Studio boom arm for radio, broadcast, studio and home use. For permanent mounting or table-clamp. Suitable for most microphones with a weight of 700-1100 grams, Purple
170.00 EUR
store
local_shipping
Røde
PSA-1+ Red
Studio boom arm for radio, broadcast, studio and home use. For permanent mounting or table-clamp. Suitable for most microphones with a weight of 700-1100 grams.
170.00 EUR
store
local_shipping
Røde
PSA-1+ White
Professional studio boom arm for podcasters, streamers and broadcasters. Works with all usual microphones and shockmounts. Silent, stable, 3/8" + 5/8", max load 1.2 kg, White.
140.00 EUR
store
local_shipping
INFO
Røde
PSM-1 Shock mount
This shockmount is optimized for use with the Rode Podcaster. Shockmounts prolong the life of your mic and can remove unwanted low frequency rumble.
64.00 EUR
store
local_shipping
D'Addario
PW-IRMM-01
Infrared Mic Noise Gate. This mic noise gate automatically silences your mic when you're not in front of it. Say goodbye to feedback, background noise, and manual muting, so you can focus on delivering your best performance.
80.00 EUR
store
local_shipping
D'Addario
PW-MSASH-01
With this universal hub you can quickly and easily attach various D'Addario accessories such as cup holders, gear plates, and tip jars to most microphone stands, simply by using a clamping mechanism.
20.00 EUR
store
local_shipping
INFO
D'Addario
PW-XPNDPBMS-01
Adjustable PedaL Board Mic Stand.
73.00 EUR
store
local_shipping
Quik Lok
Kampaaniad
QF-597 [1 pcs left]
Fixed-angle perforated metal shelf for attachment to QF-548 wall-mounted display. Also used as T-shape multifunction stand option by mounting to lower portion of vertical back spine WS-561.
19.00 EUR 47.00 EUR
store
local_shipping
Quik Lok
Kampaaniad
QL-648 [1 pcs left]
Small fixed-angle perforated metal shelf for WS-500 series modular workstations.
19.00 EUR 43.00 EUR
store
local_shipping
RME
Quadmic II
Professional multi-microphone system for innovative recording and live use
646.00 EUR
store
local_shipping
INFO
Radial
Radial Decoder- Mid/Side Matrix and Mic Preamp
Quick and easy mid/side recording without a mixer Three ult...
480.00 EUR
store
local_shipping
Rycote
Red Lavalier Windjammer - pair
Suitable for use with lavalier mic foams High-level protection against wind noise...
53.00 EUR
store
local_shipping
INFO
Radial
Relay XO
Switch vocal microphone from PA to intercom Allows artist to speak with musicians and tec...
384.00 EUR
store
local_shipping
Rycote
Replacement Modular Bracker & Knobs
The Rycote Modular Bracket is used on the Modular Suspension System. The Modular Bracke...
34.00 EUR
store
local_shipping
Sennheiser
Replacement Set Table Mount
Table Mount Set for TeamConnect Intelligent Speaker. Includes (1) Knurled nut, (1) Collar washer and (1) stud
20.00 EUR
store
local_shipping
Rycote
Replacement XX Small Modular Bar
This Rycote 1/2 Module Bar is used to extend the length of the Rycote Modular Suspensio...
41.00 EUR
store
local_shipping
sE Electronics
RF PRO
The Reflexion Filter PRO from sE Electronics is a reflection filter...
174.00 EUR
store
local_shipping
sE Electronics
RF PRO MOUNTING KIT
Designed for reflection Filter ProBetter stability100% metalIncludes...
68.00 EUR
store
local_shipping
SE Electronics
RF-X
87.00 EUR
store
local_shipping
SE Electronics
RF-X White/Black
Simple, flexible & incredibly effective solution for those who want a singing booth that does not take up much space, costs the shirt & that you can pack up & down when needed.
106.00 EUR
store
local_shipping
Adam Hall
RF1
Reflectionfilter for microphone, 5/8" thread, 504 x 306 x 270mm, thread adapter 5/8" to 3/8", 3kg.
112.00 EUR
store
local_shipping
Meinl
RIMCLAMP-M
Get perfect mic placement in tight spacesCleaner look with less mic stands on sta...
45.00 EUR
store
local_shipping
Shure
RK143G
Shure RK143G Matte Silver Grille for SM58...
15.00 EUR
store
local_shipping
Shure
RK183T1
The Shure RK183T1 Lavalier Microphone Clip features an adjustable wire, mount ensuring...
27.00 EUR
store
local_shipping
Shure
RK183WS
Windscreen for Shure MX183 / 184 / 185 / 202BC Microphones (Set of 4)...
28.00 EUR
store
local_shipping
Shure
RK184WS
The Shure RK184WS is a small lavalier windscreen designed to fit the SM1, SM2, SM10, SM...
25.00 EUR
store
local_shipping
Shure
RK244G
Replacement screen and grille assembly for the Model SM57 microphone consisting of the...
33.00 EUR
store
local_shipping
Shure
RK265G
The Shure RK265G Microphone Grille replaces a damaged grille on the Beta 58A, Beta 58M,...
67.00 EUR
store
local_shipping
Shure
RK282 holder for Beta98 SM98
Shock-Mounted Swivel Adapter for Beta 98 and Beta 98A Microphones Isolation mou...
25.00 EUR
store
local_shipping
INFO
Shure
RK304T 2 tie clips/2 windscreens for WL93T
The Shure RK304T is an accessory set for the SM93 and WL93 lavalier microphones. The se...
41.00 EUR
store
local_shipping
INFO
Shure
RK311 grill for SM81
Microphone windscreen reduces unwanted breath and wind noise. For use with the Shure SM...
12.00 EUR
store
local_shipping
INFO
Shure
RK312 grill for BETA87
Factory original dent resistant replacement grille for Shure Beta 87, Beta 87A and Beta...
72.00 EUR
store
local_shipping
INFO
Shure
RK318WS
Includes 2 black windscreens and a clothing clip for use with Shure WH20, and WH30 head...
12.00 EUR
store
local_shipping
INFO
Shure
RK320 grill for Beta57
Factory original dent-resistant replacement grille for Beta 56A and Beta 57A wired micr...
54.00 EUR
store
local_shipping
Shure
RK323G Grill Beta58 Black
Black, dent-resistant grille replaces Beta 58A wired and wireless microphone grilles. With blue ring.
67.00 EUR
store
local_shipping
Shure
RK345 windscreen for SM7B
Windscreen (Pop Filter) for SM7, SM7A and SM7B Microphones...
23.00 EUR
store
local_shipping
Shure
RK354SB klips for SM/WL93 2-pack
Microphone Tie Clip for Shure WL93 and SM93 microphones. Available in black...
19.00 EUR
store
local_shipping
INFO
Shure
RK355WS windscreen for SM93 WL93 - 4 pack
Reduces unwanted breath and wind noise and for use with the Shure SM93 and WL93 lavalie...
27.00 EUR
store
local_shipping
INFO
Shure
RK412WS
Securely fastens to MX405, MX410, MX415, MX412, and MX418 microphones. Contains 4...
31.00 EUR
store
local_shipping
Røde
RM1
The RM1 is a rugged mic clip, designed for mounting many of the Rode live performance m...
26.00 EUR
store
local_shipping
Røde
RM2
The RM2 is a low profile professional stand mount for the RODE NT2-A, NT1000, NT2000, N...
26.00 EUR
store
local_shipping
Røde
RM3
Rode's essential Stand Mount for NT3, NT4, and Other Condenser Microphones is a perfect fit for use at press conferences, for broadcast radio, and more, as it delivers tilt and swivel support.
26.00 EUR
store
local_shipping
INFO
Røde
RM5
Rode's RM5 Stand Mount for the NT5 Microphone fits both NT55 and NT5 mics and lets you...
26.00 EUR
store
local_shipping
Shure
RMCE-UNI
Earphone cable connects SE Sound Isolating Earphones with detachable cables to a mobile...
42.00 EUR
store
local_shipping
Shure
RMCE-USB
USB-C communication cable with microphone and controls for Shure Sound Isolating™...
125.00 EUR
store
local_shipping
INFO
Sony
RMM-HRD1//K rack mount kit
The Sony RMM-HRD1 Rack Mount Kit is specifically designed for mounting 1 or 2 DWZ Serie...
168.00 EUR
store
local_shipping
Audix
RMT41 KIT
Rackmount Kit for Single R41 or R61 Receiver with BNC Cables...
76.00 EUR
store
local_shipping
INFO
Audix
RMT42 KIT
Rackmount Kit for R42 or R62 Receiver with BNC Cables...
76.00 EUR
store
local_shipping
INFO
sE Electronics
RN17 Omni Capsule
Single Omnidirectional capsule for RN17 Rupert Neve microphones...
349.00 EUR
store
local_shipping
SE Electronics
RN17-CARDIOID
Cardiod Capsule - RN17...
349.00 EUR
store
local_shipping
Rycote
Rode Stereo Video Mic Pro MWJ
Suitable for rode stereo videomic pro camera microphone Manufactured from high qu...
53.00 EUR
store
local_shipping
INFO
Rycote
Rode Video Mic Pro Mini Windjammer
Lined slip-on fur cover designed for use with the Rode VideoMic. It has a windshield rating of medium that provides up to 30 dB reduction from the effects of high-wind gust noise and vocal plosives.
49.00 EUR
store
local_shipping
Rycote
Rode Videomic Go MiniWIndjammer
For Rode Videomic Go Shotgun Mic Easy-To-Fit Slip On...
49.00 EUR
store
local_shipping
ART
RP-1
Mic Preamp, single channel, improve the performance of ribbon and dynamic microphones, 100 Hz low cut filter, +48V, balanced output.
77.00 EUR
store
local_shipping
INFO
Bellari
RP520 Studio Tube Mic Preamp
Studio Tube Mic Preamp, 89 x 162 x 482 mm, XLR/6.3mm, Phase Reverse
840.00 EUR
store
local_shipping
INFO
Rolls
RPB486 6ch Phantom
The RPB486 powers up to 6 condenser microphones with 48 volts of ultra clean phantom po...
303.00 EUR
store
local_shipping
Shure
RPM181/BI
Type Condenser Frequency Response 20 to 20,000 Hz Polar Pattern Cardioid...
390.00 EUR
store
local_shipping
Shure
RPM181/C
Type Condenser Frequency Response 20 to 20,000 Hz Polar Pattern Bidirection...
390.00 EUR
store
local_shipping
Shure
RPM181/O
Type Condenser Frequency Response 20 to 20,000 Hz Polar Pattern Omnidirecti...
390.00 EUR
store
local_shipping
Shure
RPM181/PRE
The RPM181/PRE Replacement XLR Preamplifier by Shure is designed to work in combination...
390.00 EUR
store
local_shipping
Shure
RPM181/S
Type Condenser Frequency Response 20 to 20,000 Hz Polar Pattern Supercardio...
390.00 EUR
store
local_shipping
Shure
RPM226
Factory original replacement grille for Shure SM86 wired microphones and handheld transmitters.
32.00 EUR
store
local_shipping
Shure
RPM264
Replacement Mesh HeadFor KSM9 (RPW184) Capsule...
72.00 EUR
store
local_shipping
Shure
RPM266
Replacement Grille For KSM8/B, Black...
125.00 EUR
store
local_shipping
Shure
RPM268
Replacement Grille For KSM8/N And RPW170, Nickel...
124.00 EUR
store
local_shipping
Shure
RPM560
The Shure RPM550 is a replacement headband for the WBH53 omnidirectional head...
82.00 EUR
store
local_shipping
Shure
RPM626
In-Line Microphone Preamplifier for WBH53, Beta 53, Beta 91, Beta 98, MC50, and MC51 Mi...
105.00 EUR
store
local_shipping
INFO
Shure
RPM89-PRE
Shotgun Preamplifier for VP89 & SM89 Microphones...
469.00 EUR
store
local_shipping
INFO
Shure
RPM89L
Long shotgun microphone capsule for VP89 and SM89 microphones
1139.00 EUR
store
local_shipping
Shure
RPW112
Wireless SM58 cartridge replaces the cartridge, housing assembly, and matte grille for...
177.00 EUR
store
local_shipping
Shure
RPW120
Wireless Beta 87A cartridge replaces the cartridge, housing assembly, and matte grille...
440.00 EUR
store
local_shipping
Shure
RPW122
Beta87C microphone capsule cardioid...
442.00 EUR
store
local_shipping
INFO
Shure
RPW124
Omnidirectional condenser capsule offers superior sound capture and reinforcement with use of wireless handheld transmitters in critical ENG interview applications.
332.00 EUR
store
local_shipping
Shure
RPW170
Wireless KSM8 capsule in brushed nickel enables wireless performance with the KSM8 Dual...
839.00 EUR
store
local_shipping
Shure
RPW184
Black wireless KSM9 cartridge replaces the cartridge, housing assembly, and matte grille for wireless KSM9 microphones.
1017.00 EUR
store
local_shipping
Shure
RPW186
Black wireless KSM9HS cartridge replaces the cartridge, housing assembly, and matte grille for wireless KSM9 microphones.
1017.00 EUR
store
local_shipping
INFO
Shure
RPW200 Nexadyne Cardioid Wireless Head Black
Shure Nexadyne Cardioid Wireless Head, Acoustic signal processing of the dual engine design, Dent-resistant hardened grille, Black.
356.00 EUR
store
local_shipping
Shure
RPW202 Nexadyne Cardioid Wireless Head Nickel
Shure Nexadyne Cardioid Wireless Head, Acoustic signal processing of the dual engine design, Dent-resistant hardened grill, Nickel.
405.00 EUR
store
local_shipping
Shure
RPW204 Nexadyne Supercardioid Wireless Head Black
Shure Nexadyne Supercardioid Wireless Head, Acoustic signal processing of the dual engine design, Dent-resistant hardened grill, Black.
356.00 EUR
store
local_shipping
Shure
RPW206 Nexadyne Supercardioid Wireless Head Nickel
Shure Nexadyne Supercardioid Wireless Head, Acoustic signal processing of the dual engine design, Dent-resistant hardened grill, Nickel.
364.00 EUR
store
local_shipping
Proel
RSM100BK
Microphone stand with boom, 950-1600mm, 750mm boom, tripod, matt black. 2.65 kg.
56.00 EUR
store
local_shipping
Proel
RSM180 Microphone Stand
Microphone stand with boom, tripod legs, 900-1500mm, 750mm boom, 2.2 kg. Matt Black.
35.00 EUR
store
local_shipping
Proel
RSM210
Fully adjustable boom arm attachment, compatible with all Proel microphone stands, and many other brands. Height 475 mm, 3,95 kg, boom length 690 mm.
32.00 EUR
store
local_shipping
DPA
RWK4017B
The Rycote Windshield Kit from DPA is a suspension and windshield solution for the 4017B...
669.00 EUR
store
local_shipping
INFO
DPA
RWK4017C
The Rycote Windshield Kit from DPA is a suspension and windshield solution for the 4017C...
669.00 EUR
store
local_shipping
INFO
Adam Hall
S 10 B
Microphone Stand with boom, 1000-1600mm, tripod, 1.8 kg.
60.00 EUR
store
local_shipping
Adam Hall
S 5 B
Microphone Stand with boom, 940-1600mm, boom 790 mm, tripod, 2 kg.
55.00 EUR
store
local_shipping
Adam Hall
S 6 B
Microphone Stand with boom, 940-1600mm, boom 500-800 mm, tripod, 1.9 kg.
73.00 EUR
store
local_shipping
Adam Hall
S 9 B
Small microstand black for guitar, amp, drum, brass etc. 500mm, boom 500-800 mm, tripod, 1.585 kg.
54.00 EUR
store
local_shipping
Adam Hall
S TBA 01
Microphone arm Ideal for recording studios and multimedia applications. Integrated microphone cable. Clamp or base provided for table attachment.
48.00 EUR
store
local_shipping
Lewitt
S10 Conference capsule
S10 Conference capsule Providing a specifically shaped frequency response and n...
186.00 EUR
store
local_shipping
INFO
DPA
S5
3277.00 EUR
store
local_shipping
INFO
Adam Hall
S5BE
Microphe stand with boom, 980-1620mm, boom 760 mm, 1.71 kg.
39.00 EUR
store
local_shipping
Lewitt
S6 Capsule Condenser
S6 Capsule Permanently polarized condenser capsule compatible with all LEWITT g...
150.00 EUR
store
local_shipping
INFO
ART
S8
The ART S8 8-channel microphone splitter gives you an effective tool for splitting eigh...
377.00 EUR
store
local_shipping
Adam Hall
S8B Tabletop Microphone Stand
Table microphone stand, 110-175mm, 5/8" thread.
29.00 EUR
store
local_shipping
Adam Hall
S8BB
Stable microphone stand with base plate made of cast steel. 175mm, 3/8" thread.
36.00 EUR
store
local_shipping
AKG
SA 60
Stand adapter for straight shaft mics: C 391 B (AKG Blue Line) C 414 B-XL I...
23.00 EUR
store
local_shipping
Gravity
SA 6131 B
Solid and durable constructionSleek designHighly adjustableSafe and s...
91.00 EUR
store
local_shipping
AKG
SA 63
Stand adapter For: HT 4500, C 1000 S...
36.00 EUR
store
local_shipping
Gravity
SA BELT 1 B
Retractable Crowd Barrier Cassette for Stand Mounting
32.00 EUR
store
local_shipping
Gravity
SA BTRAY 1
Multi-purpose tray, fits 35 mm diameter polesSuitable for projectors, laptops, DV...
75.00 EUR
store
local_shipping
Gravity
SA CC 35 B
Cable clips for 35 mm tubingLarge 24 x 16 mm outside cable ductTight, secur...
8.00 EUR
store
local_shipping
Gravity
SA FIXTILT 5
Solid and durable constructionErgonomic handling5° fixed speaker tilt...
32.00 EUR
store
local_shipping
Gravity
SA LC 35 B
Clip-on spirit level, fits 34 - 45 mm polesFor perfectly horizontal or vertical o...
10.00 EUR
store
local_shipping
Sony
SAD-H77B
The Sony 10 Pack Single Horizontal Lavalier Tie Clip SAD-H77B is a pack of (10) lavalie...
384.00 EUR
store
local_shipping
Sony
SAD-H88B
The Sony Horizontal Clip for ECM-88 Microphone SAD-H88B (10 Pack) is a clip designed sp...
398.00 EUR
store
local_shipping
INFO
Sony
SAD-HV1B
The SADHV1B Mic Clip (Pack of 4) from Sony is designed for use with UWP Series Lavalier...
59.00 EUR
store
local_shipping
INFO
Sony
SAD-HV1B2//K
Sony SAD-HV1B2//K UWP lavalier mic clip pack of 4...
63.00 EUR
store
local_shipping
INFO
Sony
SAD-HZ1B//K
Sony SAD-HZ1B--K Horizontal single clip pack for the ECM-LZ1UBMP. Black, 4 pieces in ea...
56.00 EUR
store
local_shipping
INFO
Sony
SAD-M01//K
MICROPHONE HOLDER FOR DWM-01, DWM-02, UTX-P03 AND ZTX-01 HANDHELD MICROPHONES...
33.00 EUR
store
local_shipping
Sony
SAD-V88B
The SAD-V88B is a vertical type lavalier microphone holder clip for the ECM-88 Series.
393.00 EUR
store
local_shipping
INFO
Sony
SAD-W77B
Double/vertical holder clip for the ECM-77 Series lavalier microphonesBlack colou...
Swivel mount for small microphone capsules, 3/8" tripod thread, black"
194.00 EUR
store
local_shipping
Neumann
SH 100
Gooseneck for the Neumann MCM system including KC 1, length: 100 mm
174.00 EUR
store
local_shipping
Neumann
SH 150
Gooseneck for the Neumann MCM System, length: 150 mm. Includes (1) SH 150, (1) KC 1.
192.00 EUR
store
local_shipping
Neumann
SH 250
Gooseneck for the Neumann MCM system including KC 1, length: 250 mm
206.00 EUR
store
local_shipping
Prodipe
SHM15 Shockmount PRO
Microphone shockmount for absorbing vibratioons. 19 mm to 54mm.
15.00 EUR
store
local_shipping
Prodipe
SHM8 Shockmount PRO
Shockmount is designed to absorb vibrations from the floor and air, allowing a cleaner reproduction of sound. Suits large condenser microphones.
38.00 EUR
store
local_shipping
Universal Audio
Shockmount for UA Mics Black
Shockmount for UA Mics Black. Fits all UA microphones except Bock 251
138.00 EUR
store
local_shipping
INFO
Universal Audio
Shockmount for UA Mics Silver
Shockmount for UA Mics Silver. Fits all UA microphones except Bock 251
138.00 EUR
store
local_shipping
INFO
Rycote
Shure MV88 Mini Windjammer
Shure MV88 Mini Windjammer...
50.00 EUR
store
local_shipping
INFO
Rycote
Single Square Black Mic Flag
Suitable for microphones with a width of 19 to 38 mm. Offers a printable logo area 57 mm wide & 48 mm high
30.00 EUR
store
local_shipping
INFO
Rycote
Single Square White Mic Flag
The Rycote Square Mic Flag will accommodate microphone diameters measuring 0.74 to 1.49...
30.00 EUR
store
local_shipping
Rycote
Single Triangular White Mic Flag
The Rycote Triangle Mic Flag will accommodate microphone diameters measuring 0.74 to 1...
30.00 EUR
store
local_shipping
DPA
Single-Ear Earset Mount Beige
d:fine earhook for headset beige.
57.00 EUR
store
local_shipping
INFO
DPA
Single-Ear Earset Mount Black
d:fine earhook for headset black.
57.00 EUR
store
local_shipping
INFO
DPA
Single-Ear Earset Mount Brown
d:fine earhook for headset brown.
57.00 EUR
store
local_shipping
INFO
Radial
SIX PACK
Por...
778.00 EUR
store
local_shipping
INFO
FBT
SJ-5 BK
FBT Wall Bracket SJ-5 For J-5 series,Wall holder with flange,horizontal rotation...
45.00 EUR
store
local_shipping
FBT
SJ-5 WH
FBT Wall Bracket SJ-5 For J-5 series,Wall holder with flange,horizontal rotation...
45.00 EUR
store
local_shipping
DPA
SJS4001
DPA Microphones SJS4001 Swivel Joint, (Single)...
91.00 EUR
store
local_shipping
INFO
DPA
SJT4001
135.00 EUR
store
local_shipping
INFO
Adam Hall
SKS 22 MB
Boom Arm for SKS22XB Keyboard Stand 2-piece extendable. 800 mm, max. 140 mm, 5/8 ", 0,6 kg
30.00 EUR
store
local_shipping
Sennheiser
SL CM EB 625
Ceiling Mic Extension brackets 625
106.00 EUR
store
local_shipping
Sennheiser
SL CM EB US
Ceiling Mic Extension brackets US
103.00 EUR
store
local_shipping
Sennheiser
SL CM FB
Ceiling fixing bracket for SL ceiling mic, for installing the microphone directly under the ceiling
236.00 EUR
store
local_shipping
Sennheiser
SL CM SK
Ceiling Mic Suspension Kit
133.00 EUR
store
local_shipping
Sennheiser
SL CM VB
Ceiling Mic VESA Bracket
133.00 EUR
store
local_shipping
Omnitronic
SLIM-01 Microphone-Clamp bl
Elastic holder for microphones of slim construction with d = 18 - 25 mmWith stand...
18.00 EUR
store
local_shipping
Record
SM-08 Shockmount
Universal elastic holder for condenser microphones. Robust quality. Fits microphones from 4.5 to 4.7 cm.
15.00 EUR
store
local_shipping
Røde
SM-2 Shock mount
The Rode SM2 shockmount fits the NTK, Classic II, and NT1000 microphones...
66.00 EUR
store
local_shipping
Røde
SM-5 NTG Shock mount
Camera-Mounted Microphone Shockmount is a camera mounted shockmount, that features a ring clamp adapter that allows for mounting on high end video cameras, that fits a variety of Rode microphones.
69.00 EUR
store
local_shipping
INFO
Røde
SM-6 Shock mount/filter
Shockmount with pop filter that fits Røde NT1-A, NT2-A, NT1000, NT2000, NTK, K2, Podcaster, and Procaster, among others.
87.00 EUR
store
local_shipping
Lewitt
SM-XL
Shock mount XL, Shock mount for studio microphones, Attenuates noise, shock, and vibration, Screw thread closure permits fast and easy setup. Compatible with 3/8" and 5/8" threads.
212.00 EUR
store
local_shipping
INFO
DPA
SM1500
The DPA Microphones SM1500 Shock Mount features a double pole construction on an adjustab...
154.00 EUR
store
local_shipping
INFO
Røde
SM3-R
Suspension shock mount for mounting Røde shotgun and small-diaphragm studio microphones onto a camera.
64.00 EUR
store
local_shipping
DPA
SM4000-C
The DPA Microphones SM4000-C Suspension Mount is designed for compact, reference standard...
46.00 EUR
store
local_shipping
INFO
DPA
SM4080
The SM4080 Shock Mount from DPA Microphones is designed for use with the 4080 Miniature Cardioid Microphone, Lavalier.
27.00 EUR
store
local_shipping
INFO
Røde
SM4R
Shockmount designed specifically for the RODE NTG-1 and NTG-2 microphones.
73.00 EUR
store
local_shipping
Røde
SM8 Shock Mount
The SM8 from Rode is a shockmount engineered to provide handling-noise isolation, cable...
73.00 EUR
store
local_shipping
Sony
SMAD-P3
The SMAD-P3 Multi-Interface Shoe Adapter by Sony is for connecting the UWP-D series wir...
The SMR is a revolutionary shock mount for large diaphragm condenser microphones from R...
90.00 EUR
store
local_shipping
INFO
Audix
SMT-MICRO
Optional mic stand adapter with rubber shockmount housed within an aluminum ring. May be...
30.00 EUR
store
local_shipping
Audix
SMT1218R
49.00 EUR
store
local_shipping
INFO
Audix
SMT19
Propietary shockmount clip designed for use with the TM1, SCX series, ADX51 and any micro...
34.00 EUR
store
local_shipping
INFO
Audix
SMT25
Optional low profile shock mount system with nylon cable and thumbscrew for positioning:...
64.00 EUR
store
local_shipping
INFO
Rycote
Soft Grip Extension Handle
Rycote's Extension Handle with Foam Hand Grip adds portability to all standard micropho...
38.00 EUR
store
local_shipping
Rycote
Softie CCA Adaptor Only
The 37304 Camera Clamp Attachment (CCA) from Rycote is a device that allows you to conv...
37.00 EUR
store
local_shipping
INFO
Rycote
Softie Duo-Lyre Mount w/CCA
The Softie Mount & Camera Clamp Adapter Lyre (CCA) is designed for both boom-pole a...
110.00 EUR
store
local_shipping
Rycote
Softie Duo-Lyre Mount w/MHR
The Rycote Softie Lyre Mount with MHR replaces the built-in or accessory mic mount on y...
110.00 EUR
store
local_shipping
INFO
Rycote
Softie Duo-Lyre Mount w/PG Handle
The Softie Lyre Mount & Pistol Grip allows handheld operation of shotgun microphone...
110.00 EUR
store
local_shipping
Rycote
Softie KIT CS-M1
Holds a Sanken CS-M1 MicrophoneIdeal for Boompole or Camera MountingReduces...
184.00 EUR
store
local_shipping
INFO
Rycote
Softie Kit NTG [033394]
This Rycote Classic-Softie and Universal Shotgun Mount Kit is an all-in-one w...
184.00 EUR
store
local_shipping
INFO
Rycote
Softie-Lite 19 [031103]
The 19mm Softie-Lite 19 Slip-On Fur Screen from Rycote is designed...
78.00 EUR
store
local_shipping
INFO
Rycote
Softie-Lite 21 [031104]
The 21mm Softie-Lite 21 Slip-On Fur Screen from Rycote is designed...
78.00 EUR
store
local_shipping
INFO
Rycote
Softie-Lite Kit 19 [031101]
The 19mm Softie-Lite 19 Fur Screen Kit from Rycote includes a Softi...
184.00 EUR
store
local_shipping
INFO
Rycote
Softie-Lite Kit 21 [031102]
The 21mm Softie-Lite 21 Fur Screen Kit from Rycote includes a Softi...
184.00 EUR
store
local_shipping
INFO
Universal Audio
SOLO 610 Classic Vacuum Tube Mic Pre & DI Box
The SOLO/610 delivers the classic Putnam 610 console sound to the single channel format...
1322.00 EUR
store
local_shipping
INFO
ART
Solo MPA
Multi-Voice Tube Preamplifier, 48V phantom power and a variable input impedance control
351.00 EUR
store
local_shipping
ART
Solo Studio
Solo Studio Multi-Voice Channel Strip, 48V phantom power, front Microphone/Line balanced input or a high impedance Instrument input
351.00 EUR
store
local_shipping
Sony
Sony AD-C88 wind screen selection
Sony AD-C88 Colour wind screen pack for all ECM-88 series Lavalier Mic...
290.00 EUR
store
local_shipping
INFO
Sony
Sony AD-KIT77 accessories kit for ECM-77
The Sony ADKIT77 ECM-77 Accessory Kit includes all the parts...
290.00 EUR
store
local_shipping
INFO
Sony
Sony BATC-2AA Battery Case
* Holding two AA-size batteries, and allowing quick and easy battery exchange between a...
28.00 EUR
store
local_shipping
Sony
Sony BC-DWZ1//EU Battery charger
Recharges AA NiMH-type batteries operating with the ZTX-M02RC digital wireless handheld...
318.00 EUR
store
local_shipping
INFO
Rycote
Sony ECM - HGZ1
Affordable but offering excellent, effective protection against wind noise Made o...
50.00 EUR
store
local_shipping
INFO
Rycote
Sony ICD-SX2000 Mini Windjammer
Affordable but offering excellent, effective protection against wind noise, our standar...
50.00 EUR
store
local_shipping
INFO
Rycote
Sony PCM-D100 Mini Windjamer
Windjammer suitable for Sony PCM-D100 portable audio recorder
50.00 EUR
store
local_shipping
INFO
Sony
Sony SMAD-P3D 2 channel MI Shoe adapter
Dual channel Multi Interface Shoe (MI Shoe) adaptor for cable-free connection...
103.00 EUR
store
local_shipping
Marantz
SoundShield
Sound Shield Live is a professional vocal reflection filter perfectly sized for any stu...
137.00 EUR
store
local_shipping
Marantz
Soundshield-Compact
Sound Shield Compact is a professional vocal reflection filter designed to mount to a m...
73.00 EUR
store
local_shipping
Rycote
SP Windshield
Incredibly sleek and compact, the Rycote MiniCMIT Windshield Kit offers finely-tuned wi...
689.00 EUR
store
local_shipping
Samson
SP01
Spider shockmount for C01, C03, CL7, CL8 and C01U condenser mics...
57.00 EUR
store
local_shipping
INFO
TK Audio
SP502
500-series preamp with a unique hybrid design including both vintage and modern circuits.
816.00 EUR
store
local_shipping
sE Electronics
Space
The sE Electronics SPACE improves on the same patented technology used in the original...
253.00 EUR
store
local_shipping
Rycote
Special 105 Mini Windjammer
The Mini Windjammer is a simple, lined, furry cover to fit over the microphone directly...
50.00 EUR
store
local_shipping
INFO
Rycote
Special 110 Sphere
The Rycote Mini Windjammer Special 110 Sphere attenuates high wind and atmospheric nois...
50.00 EUR
store
local_shipping
INFO
Rycote
Special 130 Mini Windjammer
The Mini Windjammer is a simple, lined, furry cover to fit over the microphone directly...
50.00 EUR
store
local_shipping
INFO
Rycote
Special 130 X 40 Mini Windjammer
The Mini Windjammer is a simple, lined, furry cover to fit over the microphone directly...
50.00 EUR
store
local_shipping
INFO
Rycote
Special 155 Mini Windjammer
The Mini Windjammer is a simple, lined, furry cover to fit over the microphone directly...
50.00 EUR
store
local_shipping
INFO
Rycote
Special 160 Mini Windjammer
The Mini Windjammer is a simple, lined, furry cover to fit over the microphone directly...
50.00 EUR
store
local_shipping
INFO
Rycote
Special 190 Mini Windjammer
The Mini Windjammer is a simple, lined, furry cover to fit over the microphone directly...
50.00 EUR
store
local_shipping
INFO
Rycote
Special 60 Mini Windjammer
The Mini Windjammer is a simple, lined, furry cover to fit over the microphone directly...
50.00 EUR
store
local_shipping
Rycote
Special 80 Mini Windjammer
The Mini Windjammer is a simple, lined, furry cover to fit over the microphone directly...
50.00 EUR
store
local_shipping
INFO
Rycote
Special 80 Sphere/Rode NT4 Mini Windjammer
The Rycote Mini Windjammer provides optimum wind diffusion for smaller microphones. Lik...
50.00 EUR
store
local_shipping
INFO
Rycote
Special 80 X 60 Mini Windjammer
Special 80 X 60 Mini Windjammer...
50.00 EUR
store
local_shipping
INFO
Rycote
Special 90 Mini Windjammer
The Mini Windjammer is a simple, lined, furry cover to fit over the microphone directly...
50.00 EUR
store
local_shipping
INFO
ART
SplitCom Pro
The ART SPLITCom Pro can be used to split or combine low impedance mic signals, and it'...
55.00 EUR
store
local_shipping
AKG
ST 45
Low profile stand with off-center mount, rubber shock mount feet (Ø 11.5 cm/4.5...
94.00 EUR
store
local_shipping
Sontronics
ST-POP
Professional-grade pop filter, essential for anyone recording vocals, whether sung or spoken. Featuring a dual-layer nylon mesh, it offers smoother, less harsh results than traditional metal pop shields.
44.00 EUR
store
local_shipping
INFO
Veles-X
Uudis
Stage Microphone Cover
Universal double-sided design anti-dust blanket. The silver side, suitable for use on stage, prevents the microphone from overheating and reflects UV radiation, thus ensuring the sustainability of the original color.
22.00 EUR
store
local_shipping
DPA
Stand Mount with a 3/8"" thread
Stand mount to easily and quickly connect a d:vote™ 4099 Instrument Micropho...
38.00 EUR
store
local_shipping
INFO
Audix
STAND-KD
Short pedestal stand with telescoping boom arm. For kick drum and guitar cabinets. Minimu...
82.00 EUR
store
local_shipping
INFO
Audix
STAND-MB
Pedestal stand with heavy-duty weighted base. For use with the MicroBoom for presentation...
56.00 EUR
store
local_shipping
INFO
Kinsman
Standard Series Microphone Boom Stand
Adjustable microphonestand with tripod base, easy release/lock and handy cable clips on stand. Min 30cm Max 2.34m.
28.00 EUR
store
local_shipping
Sontronics
STC-1 Capsule Hyper-Cardiod Black
The hypercardioid capsule for the Sontronics STC-1 and STC-1S microphones offers exceptional directionality, making it ideal for isolating sound sources in noisy or reverberant environments. Black.
81.00 EUR
store
local_shipping
INFO
Sontronics
STC-1 Capsule Hyper-Cardiod Silver
The hypercardioid capsule for the Sontronics STC-1 and STC-1S microphones offers exceptional directionality, making it ideal for isolating sound sources in noisy or reverberant environments. Silver.
81.00 EUR
store
local_shipping
INFO
Sontronics
STC-1 Capsule Omni-Directional Black
The omnidirectional capsule for the Sontronics STC-1 and STC-1S microphones provides a natural, open sound ideal for capturing ambient audio, room acoustics, or group performances. Black
81.00 EUR
store
local_shipping
INFO
Sontronics
STC-1 Capsule Omni-Directional Silver
The omnidirectional capsule for the Sontronics STC-1 and STC-1S microphones provides a natural, open sound ideal for capturing ambient audio, room acoustics, or group performances. Silver
81.00 EUR
store
local_shipping
INFO
DPA
STC4099
The DPA STC4099 Saxophone Mounting Clip is designed to mount the DPA 4099 onto saxophones...
45.00 EUR
store
local_shipping
INFO
DPA
STC4099X
The DPA STC4099 Saxophone Mounting Clip is designed to mount the DPA 4099 onto saxophones...
450.00 EUR
store
local_shipping
INFO
Røde
Stereo Bar
The RØDE Stereo Bar is a robust solution for mounting two microphones in a stere...
60.00 EUR
store
local_shipping
Rycote
Stereo Cyclone Ambiosonic 1
Stereo Cyclone Ambisonic Windshield Kit 1 for Sennheiser AMBEO Microphone...
1102.00 EUR
store
local_shipping
INFO
Rycote
Stereo Cyclone Ambiosonic 2
Stereo Cyclone Ambisonic Windshield Kit 2 for Tetramic Microphone...
1102.00 EUR
store
local_shipping
INFO
Rycote
Stereo Cyclone DMS Kit 1
Stereo Cyclone Double Mid-Side Windshield Kit 1 for Schoeps CCM4 (Pair ) and CCM8 Micro...
1378.00 EUR
store
local_shipping
INFO
Rycote
Stereo Cyclone DMS Kit 2
Stereo Cyclone Double Mid-Side Windshield Kit 2 for Schoeps MiniCMIT, CCM8 and CCM4 Mic...
1378.00 EUR
store
local_shipping
INFO
Rycote
Stereo Cyclone DMS Kit 3
Stereo Cyclone Double Mid-Side Windshield Kit 3 for Sennheiser MKH 8040 (Pair) and MKH...
1378.00 EUR
store
local_shipping
INFO
Rycote
Stereo Cyclone Kit 2 [089111]
Stereo Cyclone Mid-Side Windshield Kit 2 for Schoeps MiniCMIT and Schoeps CCM8 Micropho...
1148.00 EUR
store
local_shipping
INFO
Rycote
Stereo Cyclone MS Kit 1 [089110]
Stereo Cyclone Mid-Side Windshield Kit 1 for Schoeps CCM M/S (Pair) Microphone...
1194.00 EUR
store
local_shipping
INFO
Rycote
Stereo Cyclone MS Kit 10
MS Kit 10 Sennheiser MKH 416 Ambient Emesser Medium...
1102.00 EUR
store
local_shipping
INFO
Rycote
Stereo Cyclone MS Kit 11
Windshield system offering acoustically transparent protection for location sound mixers and recordists using a mid-side array of Sennheiser MKH 416 and MKH 30 microphones in broadcast TV, film, video, and game audio production.
1102.00 EUR
store
local_shipping
INFO
Rycote
Stereo Cyclone MS Kit 12
Stereo Cyclone Mid-Side Windshield Kit 12 for Sennheiser MKH 60 and Sennheiser MKH 30 Microphones.
1102.00 EUR
store
local_shipping
INFO
Rycote
Stereo Cyclone MS Kit 16
MS Kit 16 Sennheiser MKH 8040/8050 Sennheiser MKH 30 Small...
1102.00 EUR
store
local_shipping
INFO
Rycote
Stereo Cyclone MS Kit 3 [089112]
Used with Sennheiser MKH 8060 and Ambient Emesser Microphone...
1102.00 EUR
store
local_shipping
INFO
Rycote
Stereo Cyclone MS Kit 4 [089113]
The new Rycote Stereo Cyclone range features a comprehensive selection of pro...
A foam windscreen for any DPA subminiature lavalier or headset microphone (6060, 6061 a...
31.00 EUR
store
local_shipping
INFO
DPA
Subminiature Mesh
Subminiature Mesh for 6000 Series Lavalier Microphone that clicks securely into place over the microphone as a substitute for the regular cap supplied with the microphone.
32.00 EUR
store
local_shipping
INFO
Rycote
Super-Blimp Kit NTG [010323]
Complete windshield and shock-mounting system for the Rode NTG series and similar shotgun microphones.
441.00 EUR
store
local_shipping
Rycote
Super-Blimp NTG5
Key FeaturesDesigned for Rode NTG5 Shotgun MicProvides Acoustic Transparenc...
459.00 EUR
store
local_shipping
Rycote
Super-Shield Kit, Large
Lightweight basket windshield system with a minimum number of parts, simple to use /...
459.00 EUR
store
local_shipping
INFO
Rycote
Super-Shield Kit, Medium
Lightweight basket windshield system with a minimum number of parts, simple to use /...
459.00 EUR
store
local_shipping
Rycote
Super-Shield Kit, Small
Lightweight basket windshield system with a minimum number of parts, simple to use /...
459.00 EUR
store
local_shipping
INFO
Rycote
Super-Shield, Windjammer (Large)
The Windjammer is a high-quality synthetic fur cover which provides excellent protectio...
138.00 EUR
store
local_shipping
INFO
Rycote
Super-Shield, Windjammer (Medium)
The Windjammer is a high-quality synthetic fur cover which provides excellent protectio...
138.00 EUR
store
local_shipping
INFO
Rycote
Super-Shield, Windjammer (Small)
The Windjammer is a high-quality synthetic fur cover which provides excellent protectio...
138.00 EUR
store
local_shipping
INFO
Rycote
Super-Softie Kit 416 [033207]
This Rycote Super-Softie Kit 416 Windshield & Universal Shotgun Mount Kit ...
239.00 EUR
store
local_shipping
INFO
Rycote
Super-Softie Kit CMIT [033208]
This Super-Softie Windshield & Universal Shotgun Mount Kit for Selected Mics&n...
239.00 EUR
store
local_shipping
INFO
Radial
SW8-USB - USB Interface and Auto-Switcher (MAC OS)
Streamlined solution for employing redundant playback systems on stage, with dual USB inputs that allow you to connect directly to your primary and backup computers, providing eight channels of high quality audio.
3074.00 EUR
store
local_shipping
Quik Lok
Swivel Microphone Arm with Clamp
Swivel mic arm, 400mm length, 3/8” thread, Clamp fits 15–35mm tubes. Lightweight (0.4?kg), Portable design made of plastic and nylon, Black.
24.00 EUR
store
local_shipping
Sennheiser
SZU 1032
Carrying sling for Handheld transmitter microphones, compatible with SKM 100/300/500/2000/2020-D, black
36.00 EUR
store
local_shipping
Audix
T-50K
Professional impedance matching transformer that allows a low impedance microphone (100-6...
40.00 EUR
store
local_shipping
INFO
Omnitronic
Table Microphone Arm TMA-1N
Height universally adjustable (43-106 cm)Incl. 5 meter XLR cableIncl. Micro...
48.00 EUR
store
local_shipping
Rycote
Table Stand 3/8" Male Thread
A 70mm ( or 2 3/4" in your old money) wide table stand from Rycote. It has a non-slip r...
49.00 EUR
store
local_shipping
INFO
Kinsman
Table top Mini Microphone Stand
Table Top Microphone Stand, 15cm basplate, 22-34 cm, 1.06 kg.
Three detachable feetFeet with rubber coating1.5 cm (5/8") thread...
13.00 EUR
store
local_shipping
Nedis
Tablestand for Mic up to 44mm
This Nedis® microphone table tripod enables you to mount and position your micropho...
13.00 EUR
store
local_shipping
Rycote
TASCAM DR-07 Mini Windjammer
The Rycote Mini Windjammer is a lined slip-on fur cover designed for use with the Tasca...
49.00 EUR
store
local_shipping
INFO
Rycote
Tascam DR-100/DR-100MkII - Mini Windjammer
The Rycote Mini Windjammer is a lined slip-on fur cover designed for use with the Tasca...
49.00 EUR
store
local_shipping
INFO
Warm Audio
TB12
More than just “more gain”, the TB12 adds rich harmonics and tone-shaping to any microphone or instrument running through the discrete analog circuitry.
555.00 EUR
store
local_shipping
INFO
DPA
TB4000
The DPA TB4000 Microphone Table Base works with most microphone holders with a 3/8-inch t...
109.00 EUR
store
local_shipping
INFO
Sennheiser
TCC M H-B
The TCC M H is the design housing for the TeamConnect Ceiling Medium in black color
257.00 EUR
store
local_shipping
Sennheiser
TCC M H-W
The TCC M H is the design housing for the TeamConnect Ceiling Medium in white color
257.00 EUR
store
local_shipping
Sennheiser
TCC M SFP-B
The TCC M SFP is a spare front plate for the TeamConnect Ceiling Medium in black color
133.00 EUR
store
local_shipping
Sennheiser
TCC M SFP-W
The TCC M SFP is a spare front plate for the TeamConnect Ceiling Medium in white color
133.00 EUR
store
local_shipping
Sennheiser
TCC M SK
The TCC M SK ceiling mic suspension kit is made to be used for an installation of the TeamConnect Ceiling Medium from higher ceilings. It consists of 3 steel cables with 16.4ft (5m) length that can be adjusted to an individual installation height.
71.00 EUR
store
local_shipping
Audix
Tension fit acoustic windscreen for i5
Tension fit acoustic windscreen for i5...
72.00 EUR
store
local_shipping
Røde
Thread Adaptor
1/4, 3/8, and 5/8 inch adaptors in a unique integrated set with a carabiner for safekeeping.
38.00 EUR
store
local_shipping
Audix
Tile Bridge for M3 Ceiling Mount 24" NT
Tile Bridge for M3 Ceiling Mount 24" NT...
62.00 EUR
store
local_shipping
INFO
Omnitronic
TMI-1 Desk Microphone Stand
High-quality microphone table tripod with boom, Adjustable height, Maximum carrying capacity: 1,5 kg, Height 42 - 33 cm, 2,43 kg.
50.00 EUR
store
local_shipping
Gravity
TMS 2222
Short microphone stand, Touring Series, with round base and telescopic boom with 2-point adjustment. 480-730 mm, boom 510-880 mm. Transport length 550 mm, 5.9 kg
137.00 EUR
store
local_shipping
Gravity
TMS 23
Microphone stand for touring, robust steel construction, 1000-1600 cm, round base plate 270mm. Transport length 1000 mm, 5.66 kg.
104.00 EUR
store
local_shipping
Gravity
TMS 2322
Microphone stand with boom (880mm) for touring use, sturdy steel construction, 1000-1680 mm, round base plate 270mm. transport length 1000mm, 6.67 kg.
154.00 EUR
store
local_shipping
Gravity
TMS 4321 B
Mikrofonstativ med standardbom, Touring Series, tripod-ben, Extremt robust stålkonstruktion, 1030-1730mm, transportlängd 980mm, 780mm bom, 3,6 kg.
72.00 EUR
store
local_shipping
Gravity
TMS 4322 B
Touring Series microphone stand with telescopic boom with 2-point adjustment, 1030-1730mm, transport length 980mm, boom length 510-880 mm, 3.8 kg.
77.00 EUR
store
local_shipping
Radial
Tonebone AC-Driver Acoustic Instrument Preamp
Studio quality preamp and class-A buffer circuitBalanced DI output to feed a PA o...
272.00 EUR
store
local_shipping
ART
TransX
The TransX two channel microphone preamplifier features a new low noise discrete transf...
760.00 EUR
store
local_shipping
INFO
Rycote
Triangular Black Mic Flag
The Rycote Triangle Mic Flag will accommodate microphone diameters measuring 0.74 to 1...
30.00 EUR
store
local_shipping
INFO
Audix
TRIPOD
Metal tirpod desktop stand for use with any 5/8" threeded mic clip...
13.00 EUR
store
local_shipping
Røde
Tripod 2
Tabletop tripod for cameras and microphones
60.00 EUR
store
local_shipping
Teenage Engineering
Tripod Mini Aluminum
Tripod mini is a compact mic stand made for portable setups. use CM–15's included adapter to mount onto tripod mini, then tilt the mic to suit your scenario, up to 90° forward and 110° back.
119.00 EUR
store
local_shipping
Teenage Engineering
Tripod Mini Black
Tripod mini black is a compact mic stand made for portable setups. use CM–15's included adapter to mount onto tripod mini, then tilt the mic to suit your scenario, up to 90° forward and 110° back.
119.00 EUR
store
local_shipping
Røde
Tripod Stand
A collapsible tripod stand for lightweight microphones with 1/4” thread. Also ideal for Zooms Handy Recorders.
50.00 EUR
store
local_shipping
DPA
TSM4001
The Table Shock Mount is a highly stylish fixed microphone mount. It is optimized for the...
296.00 EUR
store
local_shipping
INFO
ART
Tube MP
The ART Tube MP Original Microphone Preamp is the world’s most popular external t...
103.00 EUR
store
local_shipping
INFO
ART
Tube MP Project Series
The ART TUBE MP Project Series Preamp for Microphone and Instrument can a...
163.00 EUR
store
local_shipping
INFO
ART
Tube MP Studio V3
The Tube MP Studio V3 features ART's new V3 (Variable Valve Voicing) Technology. V3 pro...
137.00 EUR
store
local_shipping
INFO
ART
Tube MP USB
Professional quality audio interface that lets you connect microphone, instrument, and line level signals to audio inputs to digital audio workstations as well as standard analog devices.
163.00 EUR
store
local_shipping
INFO
ART
Tube Preampsystem II
The TPS II (Tube Preamp System 2) is a two channel high performance preamplifier couple...
Universal transport bag for wireless systems. A must for all travelling musicians and DJs. 100 x 420 x 350 mm, 1,05 kg.
68.00 EUR
store
local_shipping
Xvive
U35C
Digital wireless system operating in the 5.8 GHz band that transforms conventional condenser microphones into wireless ones. Selectable phantom power at 12V or 48V.
239.00 EUR
store
local_shipping
INFO
DPA
UA0639
DPA Microphones' UA0639 Microphone Clip is a stand adapter for handheld mics that offers...
109.00 EUR
store
local_shipping
INFO
DPA
UA0896
DPA's UA0896 Windscreen for 0.75" (19mm) Microphonesnote" works well indoors an...
22.00 EUR
store
local_shipping
INFO
DPA
UA0897
DPA UA0897 Shock Mount...
380.00 EUR
store
local_shipping
INFO
DPA
UA0961
DPA UA0961 Microphone Holder...
126.00 EUR
store
local_shipping
INFO
Neumann
UC 5
Connection cable for U 67
349.00 EUR
store
local_shipping
DPA
UC4099
DPA UC4099 - Universal Clip for 4099...
45.00 EUR
store
local_shipping
INFO
DPA
UC4099X
DPA UC4099 - Universal Clip for 4099 PACK OF 10...
450.00 EUR
store
local_shipping
INFO
Audio-Technica
UE-C
Capsule, carioid, 120 degrees, fits 853 and 857
123.00 EUR
store
local_shipping
INFO
Audio-Technica
UE-O
Capsule, omni, 360 degrees, fits 853 and 857
123.00 EUR
store
local_shipping
INFO
Audio-Technica
UE-UL
Capsule, uniline, 90 degrees, fits 853 and 857
179.00 EUR
store
local_shipping
INFO
Omnitronic
UHF-100 Windshield, skin-colored 10x
Skin-coloured microphone windscreen -Made of plastic foam /...
8.00 EUR
store
local_shipping
ART
USB Dual Pre
The ART USB Dual Pre is a full-featured high quality dual portable preamplifier and com...
106.00 EUR
store
local_shipping
INFO
SE Electronics
V-CASE
A robust case for your V SERIES drum microphones.Keep your V SERIES mics safe on...
115.00 EUR
store
local_shipping
INFO
SE Electronics
V-CLAMP
When used as designed, the V CLAMP makes your V BEAT snare & tom mics even more com...
42.00 EUR
store
local_shipping
sE Electronics
V7 Grille
Spare microphone grille for SE V7 in silver.
25.00 EUR
store
local_shipping
sE Electronics
V7 Grille Black
Spare microphone grille for SE V7 in black.
25.00 EUR
store
local_shipping
SE Electronics
Uudis
V7 Grille Chrome
Replacement grille for sE V7 microphone, chrome. A smart feature is that the center ring has flat sides so your microphone won't roll away when you put it down!
32.00 EUR
store
local_shipping
SE Electronics
Uudis
V7 Grille Gold
Replacement grille for sE V7 microphone, gold. A smart feature is that the center ring has flat sides so your microphone won't roll away when you put it down!
51.00 EUR
store
local_shipping
SE Electronics
Uudis
V7 Grille Nickel
Replacement grille for sE V7 microphone, nickel. A smart feature is that the center ring has flat sides so your microphone won't roll away when you put it down!
39.00 EUR
store
local_shipping
sE Electronics
V7 MC1
Outstanding V7 capsule with supercardioid ambient noise rejection, made for wireless us...
103.00 EUR
store
local_shipping
sE Electronics
V7 MC1 Black (Shure)
IN THE BOXV7 MC1sE Logo stickerUser manual with warranty cardbl...
118.00 EUR
store
local_shipping
sE Electronics
V7-MC1 Gold
V7 capsule in exclusive gold finish to rebuild your Shure wireless microphone!
196.00 EUR
store
local_shipping
sE Electronics
V7-MC1 Nickel
V7 capsule in a sleek nickel finish to rebuild your Shure wireless microphone!
169.00 EUR
store
local_shipping
sE Electronics
V7-MC2 Gold
V7 capsule in exclusive gold finish to rebuild your Sennheiser wireless microphone!
196.00 EUR
store
local_shipping
sE Electronics
V7-MC2 Nickel
V7 capsule in a sleek nickel finish to rebuild your Sennheiser wireless microphone!
177.00 EUR
store
local_shipping
SE Electronics
Uudis
V7-MC2-MP3 Black
Shoulder strap, Daisy After Dark, leather ends, Jacquard pattern, adjustable 104 cm-183 cm.
147.00 EUR
store
local_shipping
Sennheiser
Vertical Clip for SK 6212
Vertical belt pack clip for SK 6212
10.00 EUR
store
local_shipping
DPA
Vocal Mic Grid 2028 Complete Assembly Black finish
Complete Grid Assembly for 2028 Microphone
113.00 EUR
store
local_shipping
INFO
Rycote
Vp88/Skm4031 Mini Windjammer
The Rycote Mini Windjammer is specifically designed for use with smaller, ENG / EFP mic...
50.00 EUR
store
local_shipping
INFO
Røde
VXLR PRO
Plug Adapter with Transformer and Voltage Transformer
73.00 EUR
store
local_shipping
INFO
AKG
W 30
Foam windscreen for: CK 31, CK 32, CK 33...
14.00 EUR
store
local_shipping
INFO
AKG
W 32
Foam windscreen for ball head microphones approx. Ø 18–20 mm (2 in.): /...
The W40 M windscreen with rugged wiremesh grill is compatible with the CK41 and CK43 ca...
83.00 EUR
store
local_shipping
AKG
W444
Windscreen for use with C555 L...
11.00 EUR
store
local_shipping
Lewitt
W9
Premium 1" true condenser capsule, compatible with system from Shure (except BLX- and GLXD-series), Lectrosonics, Sony, Audio Technica 3000/5000-series, Line6 XD-V55 and Mipro ACT-series.
655.00 EUR
store
local_shipping
Warm Audio
WA-412
Four-channel microphone preamplifier, housed in a 1U 19-inch rackmounting enclosure.
1184.00 EUR
store
local_shipping
Warm Audio
WA-84 Omni Capsule - Black Color
Omni capsule in black for Warm Audio's WA84 small diaphragm condenser microphone.
139.00 EUR
store
local_shipping
INFO
Warm Audio
WA-84 Omni Capsule - Nickel Color
Omni capsule in nickel for Warm Audio's WA84 small diaphragm condenser microphone.
125.00 EUR
store
local_shipping
INFO
Warm Audio
WA-MPX Single channel
1 channel vintage micpreamp with tape saturation. Premium Components, Elite Build Quality, Superior Sound.
660.00 EUR
store
local_shipping
Warm Audio
WA12 MKII Black
Clear, Punchy, & Unapologetically Analog. The WA12 MKII truly recreates the iconic sound of punchy, focused American console preamps. Black.
458.00 EUR
store
local_shipping
Warm Audio
WA273
Microphone amplifier, 2 channels, Class A '73 British style, 4-position hi-pass filter, rack mountable, 1U.
973.00 EUR
store
local_shipping
Warm Audio
WA273-EQ
2-channel brittish Mic/Line/Instrument Preamp and EQ
1460.00 EUR
store
local_shipping
Shure
WA371 mic holder handheld wireless transmitters
Microphone Swivel clip mounts a handheld transmitter. Plastic, 5/8" Connection, black, Securely mounts the Shure wireless handheld transmitters to standard microphone stands. Includes thread adapter (reduction to 3/8")
12.00 EUR
store
local_shipping
Warm Audio
WA73
Recreates the most iconic British console sound made famous by legendary recordings from the 60s and beyond.
616.00 EUR
store
local_shipping
Warm Audio
WA73-EQ
Recreates the most iconic British console channel strip sound made famous by legendary recordings from the 60s and beyond.
815.00 EUR
store
local_shipping
Sennheiser
Wall Mount adapter
Wall Mounting Bracket for SpeechLine Multi-Channel Receiver"
133.00 EUR
store
local_shipping
Warm Audio
Warm Lifter
Inline Active Preamp, Ultra Low Noise JFET Input, True 26dB Of Clean Gain, Selectable 100 Hz (12 dB) High-Pass Filter, Selectable 3 kHz (2.5 dB) High-Shelf Boost, Impedance Matching, 69 x 41 x 119 mm, 340 g.
138.00 EUR
store
local_shipping
Omnitronic
Weather-Proof Protection Box outdoor
Splash-proof version IP44Protects against unintentional disconnectionProtec...
11.00 EUR
store
local_shipping
Relacart
WGC-1 Adapter Cable
Useful accessory Adapter cable for connecting a guitar wit the Relacart bodypac...
22.00 EUR
store
local_shipping
Rycote
White Lavalier Windjammer - pair
Designed for use with Lavalier microphones worn on the outside of clothing, the Lavalie...
53.00 EUR
store
local_shipping
Rycote
White Lavalier Windjammer - single
This Rycote windjammer is designed for use with lavalier microphones worn on the outsid...
30.00 EUR
store
local_shipping
INFO
Rycote
White Overcovers Stickies + Discs 30-pack [065527]
White Overcovers: 30 x Stickies & 6 White Fur Discs...
18.00 EUR
store
local_shipping
Rycote
White Ristretto Lavalier Windjammer - pair
The white Rycote Pair Ristretto Lavalier Windjammer is a discreet foam wind cover for u...
53.00 EUR
store
local_shipping
Rycote
White Ristretto Lavalier Windjammer - single
The white Rycote Single Ristretto Lavalier Windjammer is a discreet foam wind cover for...
30.00 EUR
store
local_shipping
INFO
Rycote
White Undercovers - 25 packs x 30 uses
White Undercovers - 25 packs x 30 uses...
275.00 EUR
store
local_shipping
INFO
Rycote
Välkmüük
White Undercovers - Pack of 100 uses
White Undercovers (incl. 100 x stickies) - Pack of 100 uses...
30.00 EUR 39.00 EUR
store
local_shipping
Rycote
White Undercovers - pack of 30 uses
The Rycote Undercover pads are a disposable mount and windshield used for mounting lava...
16.00 EUR
store
local_shipping
Rycote
Windjammer 4 (Black)
Windjammer Designed to fit the Modular Windshield 4
220.00 EUR
store
local_shipping
INFO
Rycote
Windjammer Memory Mic
Rycote Mini Windjammers are easy-to-fit, slip-on fur covers that provide excellent wind...
49.00 EUR
store
local_shipping
INFO
Rycote
Windjammer Rode Blimp
The Rycote Windjammer is compatible with the Rode Blimp Windshield and Suspension Syste...
184.00 EUR
store
local_shipping
INFO
Rycote
Windjammer Røde VideoMic Mini [055459]
The Mini Windjammer for Rode VideoMic (Original & Lyre Versions) from&nbs...
49.00 EUR
store
local_shipping
Rycote
Windjammer WJ 10
RYCOTE 021535 WINDJAMMER 10, for WS10...
184.00 EUR
store
local_shipping
Rycote
Windjammer WJ 2
The Rycote Windjammer #2 is a synthetic fur cover that offer approximately 12dB of wind...
184.00 EUR
store
local_shipping
Rycote
Windjammer WJ 295
The Rycote Windjammer #295 is a synthetic fur cover that offer approximately 12dB of wi...
184.00 EUR
store
local_shipping
INFO
Rycote
Windjammer WJ 3
The Rycote Windjammer #3 is a synthetic fur cover that offer approximately 12dB of wind...
184.00 EUR
store
local_shipping
Rycote
Windjammer WJ 4
The Rycote Windjammer #4 is a synthetic fur cover that offer approximately 12dB of wind...
184.00 EUR
store
local_shipping
Rycote
Windjammer WJ 5
The Rycote Windjammer #5 is a synthetic fur cover that offer approximately 12dB of wind...
184.00 EUR
store
local_shipping
INFO
Rycote
Windjammer WJ 6
The Rycote Windjammer #6 is a synthetic fur cover that offer approximately 12dB of wind...
184.00 EUR
store
local_shipping
INFO
Rycote
Windjammer WJ 7
The Rycote Windjammer #7 is a synthetic fur cover that offer approximately 12dB of wind...
230.00 EUR
store
local_shipping
INFO
Rycote
Windjammer WJ 8
The Rycote Windjammer #8 is a synthetic fur cover that offer approximately 12dB of wind...
230.00 EUR
store
local_shipping
INFO
Rycote
Windjammer WJ 9
This Rycote Windjammer is sized for use with the Mono Extended Ball Gag Windshield. The...
184.00 EUR
store
local_shipping
INFO
Rycote
Windjammer WJ AE
Main Benefits: Specially designed for the purpose - our Windjammer® give the...
230.00 EUR
store
local_shipping
INFO
Rycote
Windjammer WJ AG
Windjammer suitable for the Modular Stereo Windshield SWS AG/300 MS Kit
230.00 EUR
store
local_shipping
INFO
Audix
WINDSCREEN BLK L5 Y 80
WINDSCREEN BLK L5 Y 80...
72.00 EUR
store
local_shipping
Audix
WINDSCREEN FITS ADX10 ONLY SNAP ON
WINDSCREEN FITS ADX10 ONLY SNAP ON...
72.00 EUR
store
local_shipping
INFO
Audix
WINDSCREEN FITS ADX40-BLK AND ALL PROD
WINDSCREEN FITS ADX40-BLK AND ALL PROD...
72.00 EUR
store
local_shipping
INFO
Audix
WINDSCREEN FITS ADX40-WHT AND ALL PROD
WINDSCREEN FITS ADX40-WHT AND ALL PROD...
72.00 EUR
store
local_shipping
INFO
Audix
WINDSCREEN FITS F9
WINDSCREEN FITS F9...
72.00 EUR
store
local_shipping
INFO
Audix
WINDSCREEN FITS HT2 HSET MIC
WINDSCREEN FITS HT2 HSET MIC...
72.00 EUR
store
local_shipping
INFO
Audix
Windscreen heavy Duty Pop Resistance F
The Audix WS1281 is a two-stage foam windscreen, designed for the Audix MG series, Micros series, ADX12 and ADX18. Comes in black finish.
72.00 EUR
store
local_shipping
INFO
Audix
Windscreen HT7 Beige
Windscreen Audix HT7 beige.
72.00 EUR
store
local_shipping
INFO
Audix
WINDSCREEN HT7 BLACK
WINDSCREEN HT7 BLACK...
72.00 EUR
store
local_shipping
INFO
Audix
WINDSCREEN MIC EXTERNAL FOAM 12mm BL
WINDSCREEN MIC EXTERNAL FOAM 12mm BL...
72.00 EUR
store
local_shipping
INFO
Audix
WINDSCREEN OUTERFITS ADX51 SCX1 UEM81
WINDSCREEN OUTERFITS ADX51 SCX1 UEM81...
72.00 EUR
store
local_shipping
INFO
Audix
WINDSCREEN TM1 BLK PKGD
The Audix Microphones WS-TM1 Screw-On Windscreen is designed for the TM1 Test...
73.00 EUR
store
local_shipping
Rycote
Windshield 4 Kit With Zipped Windjammer
FULL WINDSHIELD 4 KIT - (MEDIUM MODULAR SUSPENSION, WINDSHIELD 4 AND ZIPPED WINDJAMMER...
827.00 EUR
store
local_shipping
Rycote
Windshield Kit 416 [010324]
Windshield Kit intended for use with the Sennheiser MKH416 and other select shotgun microphones.
The Rycote Modular Windshield is a professional windscreen intended for use with microp...
321.00 EUR
store
local_shipping
INFO
Rycote
Windshield WS 10
The Rycote Modular Windshield is a professional windscreen intended for use with microp...
321.00 EUR
store
local_shipping
Rycote
Windshield WS 2
The Rycote Modular Windshield is a professional windscreen intended for use with microp...
321.00 EUR
store
local_shipping
INFO
Rycote
Windshield WS 295
The Rycote Modular Windshield is a professional windscreen intended for use with microp...
321.00 EUR
store
local_shipping
INFO
Rycote
Windshield WS 3
The Rycote Modular Windshield is a professional windscreen intended for use with microp...
321.00 EUR
store
local_shipping
INFO
Rycote
Windshield WS 4
The Rycote Modular Windshield is a professional windscreen intended for use with microp...
321.00 EUR
store
local_shipping
INFO
Rycote
Windshield WS 9
The Mono Extended Ball Gag Windshield is a ball type wind diffuser for microphones. The...
321.00 EUR
store
local_shipping
Rycote
Wireless Receiver Bracket MKII
The Rycote Wireless Universal Receiver Camera Bracket MkII is designed for mounting a w...
92.00 EUR
store
local_shipping
INFO
DPA
WJ5100
The DPA WJ5100 Windjammer is intended for use with the DPA 5100 Mobile Surround Microphon...
109.00 EUR
store
local_shipping
INFO
Warm Audio
WM-2MPX Dual channel
2 channel vintage micpreamp with tape saturation. Premium Components, Elite Build Quality, Superior Sound.
1285.00 EUR
store
local_shipping
Neumann
WNS 100 black
Windscreen for KM 100 and KM D, KM A, and series 180, black
50.00 EUR
store
local_shipping
Neumann
WNS 110 Black
Windscreen for KM 100 and KM D, KM A, and series 180, increased efficiency, black
50.00 EUR
store
local_shipping
Neumann
WNS 120
Windscreen for KM 120 and AK 20, black
50.00 EUR
store
local_shipping
Neumann
WS 100
Windscreen for KM 100 and KM D, KM A, and series 180, black
61.00 EUR
store
local_shipping
Neumann
WS 110
Windscreen for the Neumann MCM System. Includes (1) WS 110.
20.00 EUR
store
local_shipping
Neumann
WS 2
Windscreen for TLM 102, black
61.00 EUR
store
local_shipping
Neumann
WS 47
Windscreen for D-01, black
103.00 EUR
store
local_shipping
Neumann
WS 49
Windscreen for M 49 V
103.00 EUR
store
local_shipping
Neumann
WS 69
Windscreen for USM 69i and SM 69, black
71.00 EUR
store
local_shipping
Neumann
WS 81
Windscreen for KMR 81i, black
61.00 EUR
store
local_shipping
Neumann
WS 82
Windscreen for KMR 82i, black
81.00 EUR
store
local_shipping
Neumann
WS 87
Windscreen for M 147 Tube, TLM 50/67/103/170, and U 87, black
71.00 EUR
store
local_shipping
Neumann
WS 89
Windscreen for TLM 193 and U 89, black
71.00 EUR
store
local_shipping
Beyerdynamic
WS 97
Wind screen for DT 297, TG I56c/ 57c, TG D57c/ 58c, Opus 82/ 87/ 88...
18.00 EUR
store
local_shipping
Record
WS-10
Standard foam microphone windscreen for standard handheld microphones. Reduces noise in the microphone. Universal size (40-50mm).
4.50 EUR
store
local_shipping
Røde
WS-2 Windshield
Foam windscreen. Effectively dampens noise and wind noise. 42 mm inner diameter. 90 mm deep. Suitable for NT1-A, NT2-A, NT1, NT1000, NTK, NTV, K2.
26.00 EUR
store
local_shipping
Røde
WS-6 Windshield
The RØDE WS6 Deluxe Windshield is designed to reduce wind noise when recording i...
78.00 EUR
store
local_shipping
Røde
WS-7 Windshield
High-performance windshield for Røde NTG3. Compatible with any shotgun microphone with a maximum slot length of 186mm and a diameter of 19-20mm.
78.00 EUR
store
local_shipping
Tascam
WS-86
Wind Screen For Tascam Portacapture Series And DR Series
34.00 EUR
store
local_shipping
Røde
WS-Chroma
Two foam windshields for the VideoMic NTG
37.00 EUR
store
local_shipping
Røde
WS-LAV 3-pack
The WS-LAV is a high quality pop filter, designed to fit the Lavalier microphone. A pop...
26.00 EUR
store
local_shipping
Røde
WS-NTG3
Deluxe Windshield provides excellent noise protection against high wind and adverse weather conditions. 186.5mm / 20mm.
19.00 EUR
store
local_shipping
Røde
WS-SVMP
Windscreen Video Mic Pro...
19.00 EUR
store
local_shipping
Røde
WS-VMP
When recording outdoors, be sure to use Rode's WSVM Shotgun Wind Screen to shield the r...
19.00 EUR
store
local_shipping
INFO
Samson
WS1
5-pack of black windshields for commonly used handheld microphones
20.00 EUR
store
local_shipping
Røde
WS11
The WS11 is a professional-grade windshield for the VideoMic NTG. Featuring open-cell f...
51.00 EUR
store
local_shipping
Røde
WS12
Professional-grade windshield for the RØDE VideoMic GO II microphon
39.00 EUR
store
local_shipping
Røde
WS14 Black
Pop Filter. For PodMic or PodMic USB, Low profile design, High-density foam construction with supporting ribs to maintain shape, Black.
31.00 EUR
store
local_shipping
Røde
WS14-B Blue
Pop Filter. For PodMic or PodMic USB, Low profile design, High-density foam construction with supporting ribs to maintain shape, Blue.
35.00 EUR
store
local_shipping
INFO
Røde
WS14-G Green
Pop Filter. For PodMic or PodMic USB, Low profile design, High-density foam construction with supporting ribs to maintain shape, Green.
35.00 EUR
store
local_shipping
INFO
Røde
WS14-O Orange
Pop Filter. For PodMic or PodMic USB, Low profile design, High-density foam construction with supporting ribs to maintain shape, Orange.
35.00 EUR
store
local_shipping
INFO
Røde
WS14-P Pink
Pop Filter. For PodMic or PodMic USB, Low profile design, High-density foam construction with supporting ribs to maintain shape, Pink.
35.00 EUR
store
local_shipping
INFO
Røde
WS14-PU Purple
Pop Filter. For PodMic or PodMic USB, Low profile design, High-density foam construction with supporting ribs to maintain shape, Purple.
35.00 EUR
store
local_shipping
INFO
Røde
WS14-R Red
Pop Filter. For PodMic or PodMic USB, Low profile design, High-density foam construction with supporting ribs to maintain shape, Red.
29.00 EUR
store
local_shipping
INFO
Røde
WS14-W White
Pop Filter. For PodMic or PodMic USB, Low profile design, High-density foam construction with supporting ribs to maintain shape, White.
31.00 EUR
store
local_shipping
Proel
WS1BK
Big microphone sponge windscreen. Inner dimension 45 mm x 115 mm. Colour Black.
6.00 EUR
store
local_shipping
Proel
WS2BK
Small head-mount microphone sponge windscreen set. Inner dimensions 10 mm x 25 mm. Colour Black.
3.34 EUR
store
local_shipping
Røde
WS3
Rode WS3 Windscreen in grey is built to fit the NT3 microphone. Properly equip your mic...
20.00 EUR
store
local_shipping
Eikon
WS3BE
MINI WIND SCREEN FILTER FOR HEADSET MICROPHONES
12.00 EUR
store
local_shipping
Røde
WS4
Rode WS4 Windscreen in grey is built to fit the NT4 microphone. Properly equip you...
25.00 EUR
store
local_shipping
Røde
WS5
The WS5 windshield provides additional protection for the microphone capsule against an...
23.00 EUR
store
local_shipping
Samson
WS5AH8 windscreen Airline88
Airline AH8 headset windscreens 5-Pack
16.00 EUR
store
local_shipping
Samson
WS5E
5-pack of foam headset microphone windscreens Reduces occurances of vocal popping and w...
12.00 EUR
store
local_shipping
INFO
Proel
WS6
6 universal microphone sponge windscreen set. Inner dimensions: 35 mm x 70 mm. Available colours: Black, Blue, Green, Orange, Red, Yellow.
13.00 EUR
store
local_shipping
Proel
WS6BK
6 universal microphone sponge windscreen set. Inner dimensions 35 mm x 70 mm. Black Colour.
13.00 EUR
store
local_shipping
Proel
WS6MBK
6 universal microphone sponge windscreen set. Inner dimensions 25 mm x 55 mm. Black colour.
11.00 EUR
store
local_shipping
Røde
WS8
The WS8 Deluxe Windshield from Rode Microphone is an easy-to-use high-performance winds...
39.00 EUR
store
local_shipping
Røde
WS9
The WS9 is a deluxe microphone windshield for the RODE VideoMicro and VideoMic ME, feat...
32.00 EUR
store
local_shipping
Røde
WS9-B Colour Edition
RODE WS9 Colour Edition. Windprodection for V.Micro / VM ME. Blue.
37.00 EUR
store
local_shipping
Røde
WS9-G Colour Edition
RODE WS9 Colour Edition. Windprodection for V.Micro / VM ME. Green.
37.00 EUR
store
local_shipping
Røde
WS9-O Colour Edition
RODE WS9 Colour Edition. Windprodection for V.Micro / VM ME. Orange.
37.00 EUR
store
local_shipping
Røde
WS9-P Colour Edition
RODE WS9 Colour Edition. Windprodection for V.Micro / VM ME. Pink.
37.00 EUR
store
local_shipping
Neumann
WSB
Windscreen for KU 100, black
515.00 EUR
store
local_shipping
Neumann
WSS 100 black
Windscreen for KK 104/105 and KMS 104/105/140/150, black
71.00 EUR
store
local_shipping
Zoom
WSS-6
Foam windscreen for Zoom SGH-6 and SSH-6 shotgun microphones. You can reduce wind noise while remaining acoustically transparent.
15.00 EUR
store
local_shipping
Røde
WSVM
Shotgun Wind Screen designed to fit Rode's NTG1 and NTG2 directional condenser microphones, and the VideoMic shotgun microphone.
23.00 EUR
store
local_shipping
Radial
X-AMP 500 - Reamper
Active Reamp® designed for 500 series racks 100% discrete class-A electronics for bes...
393.00 EUR
store
local_shipping
INFO
Zoom
XLR-6c
With 6 colour-coded pairs (12 rings in all), the Zoom XLR-6c coloured microphone cable rings make it easy to identify which microphone is connected to which channel via the corresponding cable.
17.00 EUR
store
local_shipping
RTX
XMB
Compatible Class-X (X83 to X203) or Rotar-X (RX20 to RX40)Adaptable directly on s...