Audix DN4

The DN4 microphone interface is a key part of the Audix Dante | AES67 Integrated Microphone System, the fast, trouble-free way to stream Audix audio performance through Ethernet networks. High-quality audio and all microphone functions – including on-off contact closure and LED status indicators – are available through a single CAT5 – CAT7 cable with RJ45 connections at both interface and microphone. This simple configuration eliminates wiring errors, accelerates installation, and reduces cost.

The DN4 features four inputs for Audix RJ45-equipped, single-element microphones and two 5V logic outputs per port, with source/sink capability for LEDs that are controlled by network-connected DSPs and one logic input per port for buttons. Low-pass and high-pass filter settings are available on each audio channel, as are eight selectable gain levels, with all settings configurable via software.

Designed, assembled, and tested by Audix in the USA.

AUDIO FEATURES
Compatible with all Audix RJ45-equipped, single-element, analog microphones
High-fidelity 24-bit, 48kHz audio
Balanced audio inputs with RFI filtering
48V phantom power output
Each channel has eight selectable pre-amp gain levels, as well as low- and high-pass filters
All channels controlled independently
Flash memory prevents loss of settings in the event of power loss
DANTE® FEATURES
Supports AES67 audio streams
Dante Domain Manager (DDM) ready
Dynamic or static IP address
Evaluated to the requirement of UL2043 and is suitable for use in above-ceiling applications
POWER FEATURES
Operates on PoE from any IEEE 802.3af compliant equipment