Rycote InVision INV-3

The Rycote INV-3 InVision Microphone Suspension addresses the demand for a professional, Rycote-quality shockmount in the studio, conference settings and speech capturing applications.

The entire mount is comprised of two low-profile InVision lyres with a 20mm (0.78") clip at the front and rear. The lyres rest on a bar with a 3/8" threaded stand adapter at the base.

The stand adapter itself features an integrated cable clip for securing excess cable and minimizing noise. The unique lyre suspension is engineered with Hytrel for a virtually indestructible design that maximizes shock and noise suppression.

The InVision suspension system is available in various clip sizes to accommodate different microphones. The dual 20mm mounting clips included with this system are intended for mounting microphones such as the DPA4021, Neumann KM100/180 Series, Sennheiser MKH8000 (with XLR module).

InVision Lyre Suspension
The small InVision lyre suspension webs measure 42mm high and 40mm wide. The small, low-profile design is ideal in broadcasts, recording applications, etc.
Two 20mm Clips
The 20mm mounting clips included with this system are intended for mounting microphones such as the DPA4021, Neumann KM100/180 Series, Sennheiser MKH8000 (with XLR module).
Hytrel Construction
The unique lyre suspension is engineered with Hytrel for a virtually indestructible design that maximizes shock and noise suppression.
Integrated 3/8" Threaded Stand Adapter
A 3/8" threaded stand adapter is featured at the base for microphone stand mounting.