Tascam MA-BT240

The MA-BT240 is a versatile mixer amplifier designed for audio distribution, presentations and announcements in smaller commercial environments.

Combining amplification for both low and high impedance speaker systems with a microphone input, two line level inputs and a Bluetooth receiver for wireless audio streaming, it is an ideal choice for restaurants, shops, institutions, waiting rooms and similar locations.

Ready for a pair of stereo speakers or distributed speaker systems,
the MA-BT240 can drive both standard low-impedance speakers and high-impedance 70-volt/100-volt distributed speaker systems, making it an ideal choice for virtually any small-format commercial sound reinforcement system.

Efficient Class-D amplifier for standard stereo speakers or high-impedance distributed speaker systems
Bluetooth receiver for wireless music streaming from portable devices and two line inputs
Mic/Line input with switchable Ducking/Paging function to automatically mute background music during announcements
The Bluetooth antenna can be extended so you can place the device in the most suitable position for your environment
Two-band EQ and high-pass filter on the output let you fine-tune your system
The output signal can be switched between mono/stereo mode
Master volume can be adjusted remotely from an external controller (sold separately)
Rack mountable with optional AK-RM05 kit (sold separately)
Built-in Bluetooth receiver for wireless streaming
The MA-BT240 makes it easy to stream music wirelessly with its built-in Bluetooth receiver. The Bluetooth antenna is mounted on the front panel for stable reception. You can also extend* the antenna with a commercially available PR-SMA cable, allowing you to place it in the optimal position for your specific space.

* Maximum possible antenna extension is approximately 20 meters

Recorder Specifications

Audio inputs
Mic/line inputs (MIC/LINE IN)
Front: XLR/TRS combo jack (balanced)
Rear: 4-pin Euroblock connector (balanced, 3.81 mm pitch)
MIC selected
Maximum input level: –30 dBu
Minimum input level: –65 dBu
Input impedance: ≥2 kΩ

LINE selected
Maximum input level: +20 dBu
Nominal input level: +4 dBu
Input impedance: ≥10 kΩ

Line inputs (LINE IN 1 / LINE IN 2)
RCA pin jacks (unbalanced)
Maximum input level: +6 dBV
Nominal input level: –10 dBV
Input impedance: ≥10 kΩ

Audio outputs
Line outputs (LINE OUT)
RCA pin jacks (unbalanced)
Maximum output level: +6 dBV
Nominal output level: –10 dBV
Output impedance: 200 Ω

Loudspeaker outputs
High-impedance output: 2-pin Euroblock connector (5.08 mm pitch)
Rated output: 1 × 240 W (70 V / 100 V)
Composite impedance: 100 V: ≥42 Ω, 70 V: ≥21 Ω
Low-impedance output: 4-pin Euroblock connector (5.08 mm pitch)
Rated output: 2 × 120 W (4 Ω or 8 Ω, 1 kHz, 1 % THD)
Load impedance: 4 Ω / 8 Ω (selectable)

Other inputs/outputs
Remote output volume adjustment
3-pin Euroblock connector (3.81 mm pitch)
(1: Vcc 5 V, 2: Control, 3: GND)

Bluetooth
Version: 5.1
Output class: Class 2 (approx. 10 m unobstructed transmission range)
Supported profiles A2DP, AVRCP
Codecs: SBC, AAC

Power supply and other specifications
Power supply
Model for Europe: AC 220–240 V, 50/60 Hz
Cooling method: Natural air cooling
Guaranteed operating temperature range: 0–40 °C
Guaranteed operating humidity range: 5–85% (no condensation)
Power consumption: Rated: 58 W (1/8 W output, 1 kHz sine wave, 4 Ω)
Idle: 18 W
Dimensions (W × H × D): 214 mm × 44 mm × 298 mm
(excluding protrusions and Bluetooth antenna)
Weight: 2.5 kg