Shure MoveMic Receiver Kit

Specifications
Frequency Response 50-20kHZ +/-1dB
Dynamic Range (A-Weighted) 100dB
Equivalent Noise (A-Weighted, Camera Out = Line Level) 31 dBSPL
Equivalent Input Noise (A-Weighted, Direct to phone) 26 dBSPL
Max Sound Pressure Level (SPL) 130dBSPL
Sensitivity when used with MV-LAV (Mic Gain = 0dB) -45dBV @94dBSPL (1 Pascal RMS)
Bit Depth 24 Bit
Sampling Rate 48ksps or 44.1ksps (Host dependant)
Gain Adjustment Range 0 - 60 dB
Minimum Load Impedance - HP 16 ohms
Maximum Headphone Output Level 26.4mW @1% THD
Minimum Load Impedance - Camera Out 2k ohms
Maximum Camera Output Level (Mic Setting) -26dBV
Maximum Camera Output Level (Line Setting) -8.3dBV
Latency to 3.5mm (without NR) 15.33 ms (within 1 frame @60fps)
Latency to 3.5mm (with NR) 17.33 ms
Latency to USB: Device Dependant Host Device Dependent

* Direct to phone is only recommended for use with the MOTIV Video and Audio App(s) only. Shure recommends using the MoveMic Receiver for additional compatibility with third party apps on mobile.

PHYSICAL SPECIFICATIONS (MICROPHONES)
Overall Dimensions (w/o windscreen) 46 mm x 22 mm x 15 mm [1.81" x 0.87" x 0.59"]
Weight (w/o windscreen) 8.2 g [0.29 oz]
Housing Black PC/ABS Thermoplastic
Antenna Sheet metal with copper-nickel-zync alloy
PHYSICAL SPECIFICATIONS (RECEIVER)
Overall Dimensions (with cold shoe mount fully extended) 65 mm x 67 mm x 19 mm
Weight (w/o windscreen) 81 g
Housing Black PC/ABS Thermoplastic
Antenna Sheet metal (tin-plated steel)