Sennheiser EW-DP ME2 Set Y1-3

Portable digital UHF wireless microphone system with ME 2 omnidirectional lavalier for filmmakers, content creators, and broadcasters.
Fully digital UHF wireless microphone system for video applications
Integrated Bluetooth for synchronization and control
Smart Notifications for troubleshooting and system guidance
Intelligent battery management provides operating time (hours:minutes)
Extended battery life: up to 12h on transmitter, 7h onreceiver
Magnetically stackable components for versatile mounting
Industry leading 134 dB dynamic range for distortion free transmission
Up to 56 MHz bandwidth for flexibility in any RF environment
Exceptionally low latency (1.9 ms)
External charging and powering via USB-C (receiver only)
Smart Assist app for monitor & control
Delivery Content
• EW-DP EK digital portable single channel receiver
• EW-D SK digital bodypack transmitter
• ME 2 omnidirectional lavalier microphone
• Mounting kit (cheese plate, cold shoe, belt clip & screws)
• BA 70 li-ion battery & (2) AA battery
• Locking 3.5 mm TRS plug to 3.5 mm TRS plug cable
• Locking 3.5 mm TRS plug to XLR plug cable
• USB-C charging cable

Specifications
System
Bluetooth® Low Energy (BLE) frequency range
2402 - 2480 MHz
Audio frequency response
20 Hz - 20 @ 3 dBfs
Audio THD
≤ -60 dB for 1 kHz @ -3 dBfs input level
Dynamic range
134 dB
System Latency
1.9 ms
Operating temperature
-10 °C - +55 °C (14 °F - 131 °F)
Relative air humidity
5 - 95 % (non-condensing)
EW-DP EK
Input voltage
~ 1.8 - 4.35 V
Input Current
Typ. < 250 mA / Max. < 400 mA (BA 70)
Typ. < 400 mA / Max. < 750 mA (2x AA batteries)
< 300 mA@5 V (USB-C standalone)
Power supply
2x AA batteries 1.5V or BA70 rechargeable battery pack or USB-C PD power supply (max.):
5V / 1500mA
9V / 900mA
12V / 700mA
Transmission power
BLE: max. 10 mW EIRP
Audio output power
< 2 dBV max. (high level) / < 4dBU max (high level)
Headphone Output
< 50 mW into 16 Ohms
Dimensions
86 x 67 x 28 mm (3.39" x 2.64" x 1.1")
Weight (without antennas and power supply)
approx. 140g (0.31 lbs)
EW-D SK (Transmitter)
Input voltage
2.0 - 4.35 V
Input Current
< 300 mA
Power supply
2 AA batteries 1.5 V (alkali manganese) or BA 70 rechargeable battery pack
Occupied bandwidth
200 kHz
Transmit power (radiated)
Audio link: 10 mW ERP (Range Y1-3: 12 mW ERP)
BLE: max. 10 mW EIRP
ME 2 (Lavalier)
Transducer principle
pre-polarized condensor microphone
Pick-up pattern
omni-directional
Sensitivity in free field, no load (1kHz)
17 mV/Pa
Frequency response
50 to 18,000 Hz
Equivalent noise level A-weighted
32 db
Connector
3.5 mm jack
Cable length
approx. 1.60 m (62.99")
Supply voltage
7.5 V