Light4me ALU Tetra RGBW Par 18x10W

LIGHT4ME ALU TETRA RGBW PAR 18x10W – DMX LED PAR light for DJs, clubs and stages

LIGHT4ME ALU TETRA RGBW PAR 18x10W is a DMX-controlled LED PAR light with 18 x 10W RGBW 4-in-1 LED sources. Individual focusing lenses provide a 25° beam angle, while RGBW color mixing combines red, green, blue and white. The fixture featuresDMX512, sound-activated mode, master/slave operation, built-in color effects and power linking.

Features
18 × 10W RGBW 4-in-1 LEDs
RGBW color mixing: red, green, blue and white
White color temperature: 3500 K
CRI: 70–75
TLCI: 60
25° beam angle
819 lx at 5 m, RGBW 100%
18 individual focusing lenses
Electronic linear dimmer, 0–100%
Four dimmer curves: linear, square law, inverse square law and S-curve
8-bit dimmer resolution
Master Dimmer via DMX
Strobe with adjustable frequency of 0–20 Hz
Color effects: Color Jump, Color Gradient, Color Pulse and Color Fade
Adjustable color effect speed
15 static colors
Auto, DMX, master/slave, sound-activated and manual modes
Adjustable microphone sensitivity in sound-activated mode
LED display and 4 buttons
DMX512
8 DMX channels
3-pin XLR DMX input and XLR output
DMX signal daisy-chain
Power linking
Up to 8 units can be power linked at 230 V
Active fan cooling
Operating temperature -20 to +40°C
IP20 for indoor use
Aluminum housing
Two-piece yoke-style mounting bracket made of powder-coated steel
Adjustable tilt angle
Side clamping knobs for the bracket
Freestanding or suspended installation on a compatible structure/truss

Power supply and connections
AC 90–240V, 50/60 Hz
Power consumption 150W
Fuse 5A
Locking blue Powercon A-type input
Locking white Powercon B-type output
1.2 m power cord

Dimensions and weight
Device dimensions: 28 × 8 × 25 cm
Package dimensions: 24 × 10.5 × 23 cm
Net weight: 2.2 kg
Gross weight: 2.5 kg

Included
LIGHT4ME ALU TETRA RGBW PAR 18x10W
Powercon-type power cord
Two-piece mounting bracket
2 bracket knob screws
2 washers
User manual