Art MX524

MX524 Five Channel Four Zone Mixer
With five input channels and four output zones, the MX524 is the most fully-featured zone mixer.

Four channels feature combo inputs for XLR or 1/4” connections, and switchable phantom power for condenser microphones. The fifth channel offers RCA line inputs.

All channels have controls for input gain and output level as well as two-band EQ, and can be assigned to any or all of the zones. Each zone has an independent level control, and any combination of zones can be monitored by headphones or the line out terminals.

When a signal is detected on the first input, the other channels will automatically lower in volume so that announcements can be clearly heard throughout a venue. Rear terminal connections also allow the connection of an auxiliary telephone signal for paging.

Flexible and easy to use, the MX524 is an ideal solution for distributed audio in restaurants, conference rooms, houses of worship, and more.

Features
Five input channels with individual level controls using XLR/Phono jacks with master level, bass and treble controls
Balanced Mic/Line XLR inputs for channels one thru four
Full +48V low-noise phantom power for channels one thru four mic inputs
Front panel 1/8-inch stereo (TRS) mini-phone plug for Headphone monitoring
Four sets of Euro Bloc connectors for the Zone outputs
Telephone paging function
DC power back up
Separate monitor outputs
LED VU meter on all outputs
Rear mount RCA Line inputs for additional audio inputs
Rugged 3U rack-mount steel chassis with built-in power supply
Perfect for stage, studio and permanent installations

Specifications
Inputs XLR / 1/4 Combo Jacks, RCA
Outputs Euroblock, Screw terminals
Input Impedance Microphone input: 1.4k Ω All other inputs 10k Ω or greater
Output Impedance Zone outputs 120 Ω Monitor Speaker output 8 Ω Monitor Line output 120 Ω
Maximum Gain 60 dB CH MIC. Input Main out (XLR, balanced)  50 dB CH MIC. Input & REC. out (unbalanced) 60 dB CH MIC. Input Mono out (unbalanced)
Frequency Response 20 Hz – 22 kHz (± 2 dBu)
Total Harmonic Distortion <0.03% @1 kHz
Phantom Power 48 VDC
Power Requirements 110~120 VAC 50/60 Hz or 24 VDC
Dimensions (HWD) 13.0 cm x 48.3 cm x 19.1 cm
Weight 3.0 kg
Note 0 dBu = 0.775Vrms