ART AR5

The ART AR5 has been engineered to deliver incredibly open and natural sounding recordings available only from a classic ribbon microphone with the added advantages available only in a true active ribbon mic design.

Classic ribbon diaphragm design delivers the warmest and most natural sound reproduction available from virtually any style of studio microphone. With incredibly fast and accurate transient response and stunning realism, the ART AR5 ribbon element is ideal for today’s direct to digital recordings.

What sets the AR5 apart from a standard passive ribbon microphone design is the integrated active preamp module that allows the classic ribbon tone to be realized with the added advantages of increased output with more stable frequency and dynamic response when the microphone is used with various differing input channel strips or preamps. Please Note – unlike standard ribbon microphones, the AR5 is active and requires phantom power to operate.

Although ribbon microphones are by their nature extremely fragile, the AR5 can handle high sound pressure levels approaching 150dB range. The low-tension 2-micron aluminum ribbons offer audio reproduction with smooth, natural extended low and high frequency response. The asymmetrical figure-8 pickup pattern has an extended sweet spot on the rear face of the microphone allowing the recording to accurately reproduce the natural space and ambient reverberation of a good sounding live room.

The microphone’s precision-tooled body and dent resistant stainless-steel wire-mesh windscreen offer unmatched long term reliability. The included shock-mount virtually eliminates vibration and handling noise, while at the same time safely securing the microphone in any position needed during the recording process. Aluminum carry case included.
Key Features
Dual Ribbon Construction for Added Sensitivity
 Integrated Active Electronics for Improved Stability and Increased Output
 Compact Design
 Removable Shockmount
Specifications
Type
Dual Ribbon
Polar Pattern
Figure-8
Frequency Response
20Hz to 18kHz
Max SPL
150dB (1kHz @ 1%THD)
S/N Ratio
69dB (1kHz@1kPa)
Open Circuit Sensitivity
-42dB (7.9mV) 1v@1Pa
Noise
25dB SPL
Impedance
Recommended Load Impedance
1000 Ω
Power Requirement
48v Phantom Power 3.0mA Typical
Dimensions
1.1″ x 6.9″ (28mm x 174.5mm)