Yamaha DHR10

The DHR10 is the perfect active speaker for the stationary PA system. With a combined 700W amplifiers, high quality DSP and two great units, the speakers deliver the best sound you'll find in this price range. The cabinet is the same construction high-end series DZR from Yamaha, so you get minimal vibration and great sound in compact format.

2-way, Bi-amped Powered Speaker, Bass-reflex
Frequency range (-10dB) 52 Hz - 20 kHz
Coverage area H90 x V60 (Rotatable)
Crossover 1.9 kHz: FIR-X tuning™ (linear phase FIR filter)
Maximum Output Level (Measured peak, IEC noise@1m) 128 dB SPL
Components LF Diameter: 10" cone, Voice Coil: 2", Magnet: Ferrite
HF Diaphragm: 1.4", Type: 1" throat compression driver, Magnet: Ferrite
Amplifier class Class-D
Power rating Dynamic 700 W (LF: 500 W, HF: 200 W) *1
Continuous 325 W (LF: 260 W, HF: 65 W)
Cooling Fan cooling, 4 speeds
Power consumption 60 W (1/8power), 18 W (Idle)
Power requirements 100 V, 100-120 V, 220-240 V, 110/127/220 V (Brazil), 50/60 Hz
A/D D/A Converters 24 bit 48 kHz Sampling
Processors HPF: OFF, 100 Hz, 120 Hz, 24 dB/Oct.; D-CONTOUR: FOH/MAIN, MONITOR, OFF
I/O connectors INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix)
Cabinet material Plywood
Finish Durable Polyurea Painting, Black
Handle Top x1
Pole socket Φ35 mm x1 (Bottom)
Rigging Top x 2, Rear x 1 (Fit for M10 x 30 - 50 mm Eyebolts)
Floor Monitor Angle -
Dimensions W 305 mm (12.0")
H 494 mm (19.5") (with rubber feet)
D 300 mm (11.8")
Net weight 15.0 kg (33.1 lbs)
Options U-bracket: UB-DXRDHR10