Thorens TD 202 Walnut

Thorens TD 202 Turntable with MM Phono preamplifier and USB

New TD 202 completes the new series of manual plug and play turntables. Compared with its “smaller” brother TD 201 it comes with a more massive plinth and a AT 95E cartridge.

Special Features

The integrated phono stage includes an additional analogue/digital converter with USB out. So the record played will be automatically digitized and can easily be recorded on a computer using several kinds of recording software that can be downloaded from the web.

Specification
Drive System: Belt
DriveMotor: DC Motor
Speed: 33 1/3 RPM, 45 RPM
Rotation Speed Variation: +/–2%
Wow and Flutter: 0.2%
Signal-to-Noise Ratio:
67dB or higher (A-weighted, 20kHz LPF)
60dB or higher (unweighted, 20kHz LPF)
Platter: Aluminum Die-cast
Diameter of Platter: 12", 300mm
Tonearm section: Alumi tube
Type: Static Balance, Straight
Effective Arm Length: 8.8", 223.6mm
Stylus Pressure Range: 0 to 4g
Supported Cartridge Weight: 3.5 to 6.0g
Overhang: 18.6mm
Anti-skating Adjustment: Supported
Cartridge sectionType: MM type (Audio-Technica AT-95E)
Stylus Construction: Bonded Diamond
Frequency Response: 20Hz to 20kHz
Channel Separation: >18dB
Channel Balance: 2.5dB
Vertical Tracking Angle: 20 degrees
Supported Load Impedance: 47k ohms
Output Voltage: 2.5mV (1kHz, 3.54cm/sec.)
Stylus Pressure: 2.0g +/–0.5g
Cartridge Weight: 5.7g +/–0.5g
Head-shell Weight: 11g (including Screws, Nuts and Wires)
OutputConnector: RCA Pin jack (Gold-plated)
Power: AC 100 to 240V, 50/60Hz
Power Consumption: 1.5W (less than 0.5W at Standby)
Overall Dimensions(W x H x D): 420 x 355x 121mm