Tascam FR-AV4

The FR-AV4 is more than just a 4-track field recorder – it's an indispensable audio solution for videographers, content creators and audio professionals.

With dual A/D converters, Tascam's Ultra HDDA low-noise mic preamp and 32-bit float resolution, the FR-AV4 captures every nuance – from the quietest whispers to the loudest explosions – with crystal clarity and no clipping. With a built-in timecode generator and HDMI sync that locks audio to video, this compact and robust tool is perfect for professional audio recording in almost any environment.
Record six tracks (four individual tracks + stereo mix) to an SDXC card
Wide analog dynamic range of 133 dB with dual A/D converters and 32-bit float resolution
Crystal-clear sound thanks to ultra-low-noise preamps (Ultra HDDA, EIN –127 dBu) on all four XLR/TRS combo inputs
Built-in mixer to mix up to four inputs to two outputs
Built-in timecode generator, synchronization via HDMI, Timecode In/Out, USB
Atomos Bluetooth-synk
Precise AV synchronization via HDMI clock, with support for cascading and record trigger control, as well as 4K/8K video pass-through
Wireless audio monitoring (via the Tascam Recorder Connect app)
Portable, lightweight and slim design – ideal for mobile recording and studio production
Selectable recording format for all types of projects (24-bit/32-bit float, 48/96/192 kHz)
6-in/2-out USB-C audio interface (24-bit or 32-bit float)
The free Tascam Recorder Connect app for iOS and Android allows control of up to 5 devices (including FR-AV2 and DR-10L Pro)*
Monitor button for quick and easy monitoring source selection
Assignable button for instant access to desired function
Built-in low-pass filter, EQ, limiter and noise gate
Selectable input and output delay (0–300 ms)
High-precision clock (TCXO) for Jam Sync and time code generation
Support for ambisonics audio recording in A or B format (AmbiX, FuMa)
Automatic file end function to prevent data loss in the event of a power failure
Phantom power (24/48 V) can be switched on/off individually for each XLR input
3.5mm TRS camera/external input (mono/stereo) with plug-in power (2.5V or 5V)
3.5mm stereo camera/timecode/line output
3.5mm stereo headphone output with volume control
Built-in tone generator for easy level matching between devices
1.9-inch (4.8 cm) LCD touchscreen and intuitive jog wheel for easy operation
Camera screw holes for use with camera rigs or tripods
Power supply via four AA batteries, USB mobile battery or optional power adapter (Tascam PS-P520U)
Interchangeable battery holder (BH-4AA) for quick and easy battery replacement (additional holders available as accessories)
*Requires optional Bluetooth adapter Tascam AK-BT2

Recorder Specifications

Recording Media
Recording media: SD/SDHC/SDXC (up to 512 GB)

Recording / Playback Formats
WAV (BWF): 48 kHz, 96 kHz, 192 kHz, 24-bit / 32-bit float, Metadata: BEXT, iXML
MP3: 48 kHz, Bitrate: 128, 192, 256, 320 kbps

Input Channels
Inputs: 4 (XLR/TRS combo for 1–4)
Hi-Z input 3–4: Unbalanced JACK, 1 MΩ
Stereo Line Input 5–8: Balanced JACK, 10 kΩ

Tracks
Number of recording/playback tracks: 6 (4 inputs + stereo mix)

Timecode
Mode: Off / Free Run / File TC Offset
Sync master: Internal / TC In / HDMI / ATOMOS / Jam Sync
Output: TC Out, Camera/TC/LINE Out, HDMI, USB

Audio Inputs (Analogue)
Mic/Line inputs 1–4: XLR-3-31 / 6.3-mm TRS
MIC: Max +4 dBu, Min −76 dBu, ≥2 kΩ, Phantom 24/48V
LINE: Max +24 dBu, Nom +4 dBu, ≥8 kΩ
Line/Camera input: 3.5-mm stereo mini jack, Max 1 dBV, Min −79 dBV, Input impedance ≥1.6 kΩ

Audio Outputs (Analogue)
Line/Camera/TC output: 3.5-mm stereo mini jack, Max +6 dBV, Impedance 210 Ω
Headphones output: 3.5-mm stereo mini jack, 50 mW + 50 mW, Min impedance 16 Ω

USB / Bluetooth / HDMI
USB: Type-C, USB 2.0 High Speed, Mass Storage / Audio Class 2.0
Bluetooth: Version 5.2, Audio Streaming
HDMI: Type-A, Version 2.1, supports 4k@60Hz, 8k@30Hz

Audio Performance
EIN: ≤ −127 dBu
Frequency response: 48 kHz: 20 Hz–20 kHz, ±0.5 dB; 96 kHz: 20–40 kHz ±1 dB; 192 kHz: 20–60 kHz ±3 dB
Dynamic range: ≥133 dB
THD+N: ≤0.01 %

Battery Operation
Alkaline (Evolta), NiMH (Eneloop), Lithium (Ultimate) – 1.5–17 hrs depending on input and phantom power

User Interface
3” capacitive touch display, 7 direct selection keys, 8 access keys, rotary dial, Wi-Fi remote control

Dimensions & Weight
184 x 42 x 130 mm
Weight: 756 g (with batteries), 660 g (without batteries)

Power Supply
4 AA batteries (alkaline, NiMH, lithium-ion), USB bus power, optional PS-P520U AC adapter, max 5.4 W

Included Accessories
Safety guide, Tascam ID registration guide