Taga Harmony HTA-2000B V2 Silver

The HTA-2000B v.2 is a 150 W high-end hybrid integrated amplifier utilizing a 12AX7 tube preamp section with a cathode-type amplifier circuit and a 12AU7 SRPP stage serving as a buffer amplifier. This design ensures a warm, linear, and lifelike sound with impressive dynamics.

High-performance tubes and a precise high-voltage hybrid transistor power supply provide voltage stability and very low AC ripple. The result is a natural and fresh sound with a deep, multidimensional soundstage.

High-power transistors used in the 0 dB current amplification circuit reveal more musical detail, delivering pure energy and dynamic drive even for demanding speakers.

The tube circuit is cross-connected with audiophile-grade MKP capacitors for stable playback and improved tonal balance and depth. An audiophile-grade Japanese ALPS volume potentiometer minimizes noise and channel crosstalk while ensuring precise control.

An oversized aluminum heat sink system dissipates internal heat, allowing long-term high-power playback with low distortion. Gold-plated speaker terminals ensure nearly lossless signal transmission.

Analog inputs with solid machined brass RCA sockets support up to three stereo devices including turntables with MM and MC cartridges. A built-in high-resolution 32bit / 384kHz DAC ensures excellent digital performance via USB or optical input. Bluetooth® enables wireless streaming from compatible devices.

A high-end headphone preamplifier is included for private listening. The pre-out allows connection to an external power amplifier or powered subwoofer.

Specifications
Design: Hybrid amplifier
Class: A/B
Vacuum tubes: 2 x 12AX7
Vacuum tubes: 2 x 12AU7
Power output / impedance: 2 x 150W 8 ohm
DA converter USB-DAC: Asynchronous 32bit / 384kHz Texas Instruments PCM-5100
Wireless connectivity: Bluetooth® v4.0
Digital inputs: USB (computer), Optical
Analog inputs: CD, Line
Phono (MM/MC): Input impedance 47Kohm/120pF | 100ohm/120pF
Phono output voltage: 300mV @1kHz – 3mV (MM) 0.3mV (MC)
Phono SNR: 83dB | 70dB
Analog output: RCA Pre-Out
Headphone output impedance: 32–320 ohm
Headphone output power: 1W 160 ohm
Frequency response: 20Hz – 20kHz (±0.5dB)
Total harmonic distortion: <0.1% (1kHz 1W)
Signal/Noise ratio: 90dB
Features: Tube window dimmer, Direct mode, Loudness
Bass control: 100Hz ±8dB
Treble control: 10kHz ±10dB
Remote control: Aluminum
Bluetooth antenna: Yes
Removable IEC power cord: Yes
AC power / consumption: 220–230V 50/60Hz, 450W
Dimensions (H x W x D): 14.2 x 43 x 38 cm
Weight: 16.5 kg