Sony DWM-02N/21 handheld Channel 21-29

Sony DWX wireless radiomic systems include Series 2 and Series 3 products, with the latter being backwards compatible. They have been designed for use in broadcast TV studios, ENG, and live event sectors. The DWX series UHF digital system uses a ‘complete digital workflow’ from preamp to AES/EBU output and provides a full 24-bit digital signal from transmitter input to receiver output by using 96kHz A/D and D/A convertors.

All DWX transmitters and receivers are compatible with Sony’s Wireless Studio software when running on a compatible computer. This allows the user to remotely operate transmitters and receivers from a connected computer within the same network when the receiver(s) is connected. This remote control can be achieved using the antenna on the back of the receiver, with no extra hardware required, or via the RMU-01. By using the optional RMU-01 the user can control of up to 88 transmitters with one unit.

The DWX series transmitters and receivers have three codec modes to best suit the application. Depending upon the models used these modes offer differing levels of latency for either higher quality, more reliability or compatibility.

DWX transmitters, with the exception of the DWT-B03R micro-bodypack, are available in three frequency bands;
TV Channel 21-29 covers 470.025MHz to 542.000MHz
TV Channel 33-40 covers 566.025MHz to 630.000MHz
TV Channel 42-50 covers 638.025MHz to 710.000MHz