Sonnet Solo5G USB-C

5x Network Performance - 500% the Speed of Gigabit Ethernet

Even Faster Transfers Across Existing Ethernet Cabling

Interested in economically achieving 5x network performance at your desk using the existing Cat 5e cabling already in your walls? Sonnet has the solution — Solo5G USBC to 5 Gigabit Ethernet Adapter, an affordable solution that connects an RJ45 port for superfast 5 Gigabit network connectivity to Mac, Windows, and Linux computers with USBC or Thunderbolt ports.

Same Connector and Cabling

Featuring NBASE-T technology, the compact Sonnet Solo5G adapter supports 5 Gbps link speeds (5GBASE-T) over common Cat 5e or better cabling when used with a compatible Ethernet switch with multi-Gigabit (NBASE-T) support. Affordable models are available now.

Connected to the right switch, you can get great performance gains — 500 percent the speed of Gigabit Ethernet — without rewiring! In case you’re connecting to a switch without 5GbE support, Solo5G also supports 2.5 Gbps, 1 Gbps, and 100 Mbps link speeds.

Even Faster Speeds with a Multi-Gigabit Switch

Solo5G measures just 1.2 inches wide by 3.2 inches deep by 0.7 inches tall and fits easily into a pocket in your backpack or equipment bag. Enabling truly portable use, this Sonnet aluminum enclosure adapter is powered by your computer’s USB or Thunderbolt port, connecting via the attached 6-inch (0.15-meter) USBC cable. The adapter’s rugged aluminum case withstands heavy use.

Zero Driver Installation, Simple Configuration

There’s no software for you to install — just connect Solo5G USBC to 5 Gigabit Ethernet Adapter to your computer and to the network switch (or directly to your NAS), and then configure the adapter’s settings through the macOS Network control panel, Windows Device Manager, or Linux command line (or graphical utility). How’s that for simple?

Efficent, Silent, and Runs Cool

Solo5G supports the Energy-Efficient Ethernet (IEEE802.3az) standard, which reduces the adapter’s power demands on your computer. The adapter runs cool and silent.

Faster Connection to Your NAS

Solo5G enables you to achieve faster file transfers to and from your Network Attached Storage (NAS) with 5GbE or 2.5GbE support.

FEATURES

- Adds 5 Gigabit Ethernet Connectivity: Adds a 5 Gigabit Ethernet (RJ45) port to your computer.
- Supports NBASE-T Standard: 5 Gb/s speed supported when used with a multi-Gigabit compatible 10GbE switch or router. Also supports 2.5 Gbps, 1 Gbps and 100 Mbps speeds.
- Budget Friendly: Low-cost adapter connects your computer to infrastructure via inexpensive Cat 5e (or better) cables at distances up to 100 meters.
- Broad Computer Compatibility: Connects to any USBC or Thunderbolt computer port, or to a USB-C port on a dock.
- Zero Driver Installation: The drivers that support Solo5G are part of your computer’s operating system software; there’s nothing for you to install.
- Easy Configuration: Change the adapter’s settings using operating system tools.
- Aluminum Construction – Small and Silent: Solid aluminum construction adapter is pocketable and uses no fan, perfect for use in noise-sensitive environments.
- Bus-powered: Powered through its USB connection, the Solo5G requires no power adapter.
- USB Cable: Convenient USBC captive cable.