Shure SLXD15 Portable Bodypack Without S50

SLXD5 Specifications

Dimensions
(H × W × D) 4.21 × 2.68 × 1.0 in
(107 × 68 × 25.3 mm)
Weight 1.8 lb (182 g)
Housing Aluminum
Power Requirements Battery: Rechargeable Li-Ion or
1.5 V AA batteries
Power Supply: SBC-DC-903 Battery
Eliminator, or 5 VDC via USB-C
RF INPUT

Spurious Rejection >75 dB
Typical
Impedance 50 Ω
Phantom Power Protection Yes
Antenna Type 1/4 Wave Whip
AUDIO OUTPUT

Audio Frequency Response 20 Hz – 20 kHz
(+1, -3 dB)
Connector Type 1/8" (3.5 mm), ×2
Configuration Balanced (Mono): Tip=audio +,
Ring=audio –, Sleeve=ground
Dual Mono: Tip = left, Ring = Right,
Sleeve = Ground
Impedance
(Camera) Balanced (Mono) Line: 450 Ω
Balanced (Mono) Mic: 240 Ω
Dual Mono Line: 400 Ω
Dual Mono Mic: 200 Ω
Full Scale Output Camera (Balanced Line): 15 dBV
Headphone: 13 mW @ 64 Ω Load
SLXD1 Specifications

Battery Type Rechargeable Li-Ion
or 1.5 V AA batteries
Dimensions
(H × W × D) 3.86 × 2.68 × 1.0 in
(98 × 68 × 25.5 mm)
Weight 3.1 oz (89 g)
Housing PC/ABS
AUDIO INPUT

Connector 4-Pin male mini connector (TA4M)
Configuration Unbalanced
Impedance 1 MΩ
Maximum Input Level 8.2 dBV
(2.57 Vrms, 7.27 Vpp)
Preamplifier Equivalent
Input Noise (EIN) –118 dBV
RF OUTPUT

Antenna Type 1/4 Wave
Occupied Bandwidth Modulation Type Shure Propietary Digital
Power 1 mW/10 mW
Varies by region.