Artiklinumber: IDS0136915
Tellides 2-10 tööpäeva.
Tarneaeg ca. 2-10 tööpäeva.
Saadaval tarnija laos
Tarneaeg on meie hinnanguline aeg, mille jooksul saame kauba teile kohale toimetada kas meie enda või välise lao kaudu. See on ainult hinnanguline ja tarneaega võivad mõjutada mitmed tegurid, mis on meie kontrolli alt väljas. Jätame endale õiguse võimalikele viivitustele, läbimüügi lõppemisele ja muudatustele. Samuti jätame endale õiguse muuta tarneviisi, kui tellimus on teie valitud tarneviisi jaoks liiga suur või raske. Saate SMS-i või e-kirja, kui teie pakk on teie valitud pakiautomaadis või esinduses kättesaadav. Kui valisite kojuveo, saadetakse teile eelnev teavitus, et leppida kokku tarneaeg. Kui soovite kauba poest ise järele tulla, olete oodatud pärast SMS-i saamist, et teie tellimus on valmis.
881.00 EUR/tk
Igakuine kuumakse alates 27.03 euro
The Shure KSM11 wired vocal microphone is specifically optimized to accurately project and present the artist's voice. As touring stage technology has evolved, Shure has developed the KSM11 to take advantage of increased linearity and sound quality. Featuring a premium cardioid condenser design, the KSM11 offers near-perfect off-axis rejection and a highly consistent polar response, thanks to a skillfully engineered combination of transducer and shock-mount technology. The result is an elegant and natural balance between clarity in the low and mid ranges and important details in the high frequencies, specifically developed for prominent applications such as live performances, live event recording, and premium streaming.
Proprietary condenser capsule with a ¾-inch gold diaphragm and premium electronics for exceptional dynamic range and transient response.
Highly consistent and deep cardioid polar pattern reduces off-axis phase distortion and enables focused vocal reproduction with rich, full bass response, linear and transparent midrange, and natural high-frequency detail.
Streamlined design for a smaller, lighter capsule.
Advanced suspension isolation system for virtually no handling noise.
Bite-resistant hardened steel grille with three-stage plosive reduction filter for consistent, artifact-free voice reproduction.
Also available as a wireless capsule, in black and nickel (RPW192 and RPW194), and in a package with a handheld transmitter for ULX-D and Axient Digital.
Specifications
Type: Electret condenser
Polar pattern: Cardioid
Frequency response: 80 Hz to 20 kHz
Output impedance (1 kHz): 150 Ω
Sensitivity:
1k load: –49 dBV/Pa (3.5 mV)
5k load: -48 dBV/Pa (3.9 mV)
1 Pa=94 dB SPL
Maximum SPL: 149 dB SPL
Signal-to-noise ratio: 75 dB (S/N ratio is the difference between 94 dB SPL and the corresponding SPL for self-noise, A-weighted)
Dynamic range:
1 k load: 130 dB
5 k load: 131 dB
Clipping level:
1 k load: 6.2 dBV
5 k load: 7.7 dBV
Self-noise: 19 dB SPL (typical, equivalent SPL, A-weighted)
Common mode rejection: > 55 dB
Connector: Three-pin professional audio connector (XLR), male, balanced
Polarity: Positive pressure on the diaphragm produces positive voltage on pin 2 relative to pin 3
Power supply: 11 to 52 V DC phantom power (IEC-61938) 5.2 mA, maximum
Weight: 239 g (8.43 oz.)
Dimensions: (diameter × height) 48.7 × 76.3 mm
Enclosure: Aluminum and steel grille