Radial JDI DUPLEX STEREO

This machine is a feature-packed stereo passive DI box. XLR and 1/4-inch phone and are equipped with a mini phone jack and RCA. Through terminals that can be used to provide input, so a variety of equipment can be connected in a variety of ways. Could be used in musical instruments, broadcasting equipment, AV equipment, etc. with high quality, low-noise signal. Must be strong enough just by connecting the use immediately and withstand harsh use.

[Feature]
• Stereo DI box, high-output sound support
-10 up to 40 kHz Hz flat frequency response is
-Phase slippages are almost zero.
-Eliminate cause ground loop hum or buzz

♦ featuring high-quality Jensen transformers
Jensen audio Transformers 2 with this machine, you can work with the high-quality audio signals of the source. Signal phase almost no deviation or distortion, flat frequency response. Ideal for use in high-output instruments like electric pianos and electronic drums can drive extreme transformer allows you to the warm sound of a natural saturation. Audio systems, video monitors, ground loops occur caused by hum and buzz can be removed by the isolated transformer.

♦ professional model equipped with various pins
This machine is equipped with various terminals. 1 / 4 inch phone, instruments, RCA & 3.5 mm TRS unbalanced-10 dB consumer for the XLR is the +4 DB Pro audio equipment. Unique bookends-style flared around the switch protects the front panel pin and prevents switch is pressed by surprise. Case is 14 gauge steel and sturdy and the internal frame is strong shocks and twists, solder Board peeling of unlikely to use. Transformers are protected with Mu-metal shielding can, protects the transformer from magnetic and forming a Faraday shield, occurring from the stage amplifier, etc. Pad is located on the bottom, in addition to insulating effect, non-slip also serves as a.

* The JDI Duplex model change.
Changes from the previous model are as follows.
-Change the size of the enclosure, rack-mount kit (sold separately).
-Add a stereo mini headphone input jack.
And changing the layout of the Terminal (1/4-inch phone jack goes to the rear panel)
-Ground lift switch on each channel equipped with a (formerly common in both CH)
-Abolition of the HI-CUT switch
Switch name changed (MERGE MIX to MONO SUM)

[Specification]
Dimension: 160 W x 48 H x 127 Dmm
Weight: 1.0 kg