Radial Dinet DAN-TX Dante transmitter, stereo DI inputs & digital out

Stereo analog input device for Dante networks
Connect instruments or line level sources
¼”, RCA and 3.5mm stereo TRS inputs
24bit/96kHz analog to digital conversion

The DiNET DAN-TX is a robust solution for interfacing analog audio gear with a digital Dante-enabled network. Inputs are provided for ¼”, RCA, and 3.5mm connections; so instruments, mobile phones, tables, and professional audio gear can be seamlessly integrated. The DAN-TX handles signal levels up to +24dB, so even the hottest outputs can be used without overloading the device. Side switches allow you to configure the DAN-TX for use with either instruments or line level devices, engage a -20dB pad, or utilize a high-pass filter when needed. 24bit / 96kHz converters ensure the best possible audio quality, and 14-gauge steel construction ensures the DAN-TX will stand up to the toughest touring conditions.
Specifications 
Block Diagram 
Specifications
 
Audio circuit type:
High current balanced active input device
Number of channels:
2
Frequency response:
20Hz - 20kHz
Dynamic range:
>103dB
Total harmonic distortion:
0.008% @ -6dBfs
Intermodulation Distortion:
0.0017% -10dBfs
Input Impedance:
Unbal 240kΩ (20kΩ Line Mode), Bal 40kΩ,
Noise:
-98dB (EIN)
Noise:
44.1kHz, 48kHz, 88.2kHz, and 96kHz (24bit)
Features
Input pad, HPF, Level Control
Input Connectors:
1/4" TRS, 3.5mm & RCA
Output Connectors:
RJ45 Ethernet
Extras:
Instrument or Line Mode
General
Construction:
14-gauge steel
Size (L x W x D):
5" x 3.31" x 1.88" (12.7cm x 8.4cm x 4.8cm)
Weight:
1.45lb (0.66kg)
Shipping size (L x W x D):
11.75" x 4.75" x 3" (29.8cm x 12.1cm x 7.6cm)
Shipping weight:
2.1lb (0.95kg)
Power:
15VDC 400mA (included) or PoE
Conditions:
For use in dry locations only between 5°C and 40°C
Warranty:
Radial 3-year, transferable