Peavey Invective 112 20 Watt Combo

Peavey Invective. 112 20 Watts Combo
An amplifier that delivers what you would expect from an Invective amplifier. The Invective.112 is a combo with a 12" speaker element, perfect for when you just want to play a little at home in your living room or in the studio, but if you want to take it with you to a gig, that's no problem. Based on the legendary 6505 series, this amplifier with both tubes in the preamp and power amp has a generous control panel that lets you dial in your perfect tone regardless of volume.

Like the Invective 120 and Invective MH, the Invective.112 was designed in collaboration with Misha Mansoor from the band Periphery, where the Clean channel delivers crystal-clear sound regardless of volume, which is not only good in itself, but also makes it the perfect companion for any distortion or overdrive pedals you want to add to your sound.

The Lead channel can deliver everything from a thin, brittle overdrive to a fat, attack-rich distortion using the Tight, Gate, and Boost functions. All so you can tailor the sound you want, these functions can also be controlled via the included footswitch.

Add reverb to your clean or distorted sound, or connect effects to the effects loop, which also has a built-in buffer to guarantee signal quality and further increase flexibility. To give you even more options for finding the sound you want, there are also Resonance and Presence controls that work on both the Clean and Lead channels.

Now you can get the Invective sound in a smaller format and at a lower volume. The combo has three 12AX7/ECC83 tubes in the preamp and two EL84 power amp tubes, delivering up to 20 watts, but can be turned down to 5 or 1 watt while maintaining the tone. With the DI output that has speaker simulation, you can connect the amplifier directly to a mixer for recording or live use. It is also possible to turn off the speaker if, for example, you only want sound through the monitors on stage or in the studio. Another way to connect the amplifier to your computer during recording is via the USB output, which functions as a sound card and can send an audio signal directly to your computer.

20, 5, or 1 Watt
12" Celestion Vintage 30 Element
2 EL84 tubes in the power amp, 3 12AX7/ECC83 tubes in the preamp
Clean and Lead channels with separate 3-band EQ and Pre- and Post-Gain
Resonance and Presence controls
Reverb
Effects loop with built-in buffer
DI output (XLR) with speaker simulation (MSDI)
USB output with audio out
Tube status indicator
Mute function for the built-in speaker
Output for external speaker cabinet
Headphone output