Light4me Bros 5 Beam LED

Light4me Bros 5 Beam is a professional LED light effect, whose light sources are 5 moving heads each equipped with 40W RGBW main diodes and 24 0.2W RGB background diodes! The operation of each head, including the main diode effects and background effects, can be controlled separately using the DMX (Pixel Control) protocol. LED lighting works great on music stages, during performances and shows, in dance clubs and discos, as well as dynamic lighting for wedding bands and mobile DJs .

Included:
light effect Light4me Bros 5 Beam
powercon power cord
2 mounting brackets

Simple operation of the highest quality effect from Light4me
The LED effect of Light4me Bros 5 Beam is a very high quality of workmanship and electronic components used. The device has a very solid housing, and the included 2 mounting brackets allow installation on lighting ramps and stage trusses . The device has a powercon power socket, as well as a 3-pin XLR input and output that allows you to control the LED effect using the DMX protocol. The front control panel has a color LCD display and 4 buttons that allow you to navigate the menu and choose one of the four available operating modes:

auto - in this mode, the device works autonomously based on built-in programs responsible for movement and lighting;
sound - sound control mode, using a very sensitive microphone installed in the body of the case;
master/slave – synchronous operation mode, in which units are connected to each other into assemblies using DMX sockets and cables, and the way the first device in the line is operated by other lighting devices;
DMX – when external controllers and control panels are used to control the operation of the lights.

DMX and RDM control - possibility of two-way communication
Individual functions of the Light4me Bros 5 Beam light effect can be controlled using controllers that support the standard DMX protocol, as well as via RDM (Remote Device Management) mode . This second control mode offers an improvement in the DMX protocol by adding two-way communication between lighting controllers and connected RDM-compliant devices. This can be achieved with standard DMX512 wires. The RDM protocol enables two-way communication, which provides many benefits and is especially useful for setting addresses and other functions.

Stage lighting for a band or DJ
The Light4me Bros 5 Beam light effect is a perfect stage lighting that has been designed for various lighting installations. Thanks to its low weight, the LED effect is very mobile, and its internal mechanisms and functions allow it to be used in almost any stage situation. The device can work as a dynamic disco lighting, stage illuminator, in homes and cultural centers, as well as a lighting fixture for event bands and mobile DJs . It is also worth adding that compared to other lighting devices of this class currently available on the market, Light4me Bros 5 Beam is also a competitive LED light effect, the highest quality of which is guaranteed by the Light4me brand.

Technical specification:
Power supply: AC 100-240V, 50/60Hz
Power consumption: 250W
Fuse: F5AL/250V
Light source: 5x40W 4in1 RGBW LED + 120x0.2W 3in1 RGB LED
Power socket: powercon
DMX input and output: 3-pin type XLR
Strobe frequency: 1-20 Hz
DMX channels: 11/60
Dimmer: full range (0-100%)
Operating modes: auto, sound, master/slave, DMX
RDM function: yes
PAN range: 540°
Reversal of PAN movements: yes
TILT range: 200°
TILT motion reversal: yes
Display off: yes
Invert display orientation: yes
IP class: IP20
Dimensions: 100 x 13.7 x 25.8 cm
Net weight: 12.4 kg