LD Systems Anny 8 G

Portable battery-powered Bluetooth® PA loudspeaker with mixer and 1x wireless handheld microphone.
8" Portable active 2-way full-range loudspeaker
Built-in 5-channel mixer with 3-band EQ, reverb and delay
Long battery life: up to 11h (ECO mode) / 3.5h (max. volume)
1x wireless handheld microphone incl. AA batteries
Bluetooth® 5.0 and stereo streaming (TWS) with two ANNYs
Clear and distortion-free sound at maximum volume through DynX® DSP (Gen. 2)
2x microphone/line inputs for versatile connection options
1x stereo channel with 3.5mm jack (AUX) or Cinch
Priority/ducking mode to emphasise the microphone signal
Tilt-Back cabinet for optimum sound dispersion
35-mm flange for use with a speaker stand
USB-C port for charging a tablet or smartphone
Footswitch input for hands-free effect control
Integrated holder for tablet or smartphone

Specifications
LD Systems ANNY® 8 GN Portable battery-powered Bluetooth® PA loudspeaker with mixer,
Product type
Battery-powered PA speaker
Type
Powered
Color
Urban Grey
System output (RMS)
80 W
System output (Peak)
160 W
Max. SPL Average (Sine burst)
110 dB
Max. SPL Peak (Sine burst)
117 dB
Frequency response (-10dB)
53 - 20000 Hz
Crossover frequency
1800 Hz
Dispersion (H x V)
120° x 60 °
Width
249 mm
Depth
282 mm
Total Height
390 mm
Features
3-band-EQ, 6-channel mixer with system presets, Effects (reverb and delay), Priority/ducking mode, TWS, USB-C port für mobile device charging
low-mids:
Woofer dimensions
8 "
Woofer dimensions (mm)
203 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil (inch)
1.5 "
Controls
effect, Input 1 Mic/Line switch, Input 1 volume, Input 2 Mic/Line switch, Input 2 volume, Input 3+4 volume, Input 5+6 (Bluetooth) volume, Main volume / menu navigation, Power
Woofer voice coil (mm)
38 mm
Indicators
battery status, multifunction LC display
Cabinet construction
Bass Reflex
Housing material
ABS plastic
Weight
8,8 kg
HF:
Horn
Constant directivity
Tweeter dimensions
1 "
Tweeter dimensions (mm)
25 mm
Tweeter magnet
Ferrite
Tweeter brand
Custom-made
Tweeter voice coil
1 "
Tweeter voice coil (mm)
25 mm
Amplifier module (integrated):
Amplifier
Class D
Protection circuits
Short circuit, thermal overload
Ambient temperature (operating)
0°C - 40 °C
Relative Humidity
0 - 80% (non condensing)
Fuse
T2 AL 250V
Mains connector
IEC
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power consumption
150 W
Physical inputs
5
Physical input connectors
2 x 6.3 mm / XLR combo, 2 x RCA, 3.5 mm jack
Mix output
1
Mix output connector
XLR male
Bluetooth Standard
5.0
Bluetooth Audio Decoder
AAC, SBC
Rechargeable battery:
Rechargable batteries
14.8V / 5Ah
Battery technology
Li-Ion rechargeable battery
Indicator battery
4 - segment LED
Battery life music (MUSIC, full volume)
3.5 Hours
Battery life music (ECO, mid volume)
11 Hours
Charging time (80%, no signal)
3 hours
Charging time (full recharge)
5 hours