Focal Utopia Main 212

Focal has stepped into the realm of main monitoring, with the brand-new Utopia Main range.
This range combines over 40 years of Focal’s research in driver design and 20 years of innovation in studio monitor development, within its Pro Audio Division.
The Utopia Main 212 is the 3.5-way model, featuring a dual bass driver and a dual midrange driver configuration, of this incredible range.

Key points

• All-new 'M'-shaped 'W' membrane midrange driver: extreme rigidity due to its shape and
material, with a powerful magnet, to ensure a precise midrange with no resonance and very-low
distortion.
• 1.5" 'M'-shaped Beryllium tweeter: including the Tuned Mass Damper® and Infinite Acoustic
Loading® technologies, to improve stiffness and rigidity, for excellent transient response with
minimum distortion – causing less listening fatigue.
• Current Mode Amplification: the most natural way to amplify a loudspeaker, achieving
the lowest THD levels ever measured. Controlling the current instead of voltage is directly
controlling the force on the driver and, therefore, it’s response and getting rid of any additional
unwanted artifacts.
• Available port plug accessory*: for either precision ("sealed") or more energetic bass ("ported").
• On-site fine-tuning using the amplifier’s feature board: 2 PEQs, volume trims for each driver,
low-shelf, high-shelf, soffit compensation filter, port compensation filter ("sealed" or "ported"),
front LED deactivation, standby mode deactivation, etc.
• Massive cabinet using 30mm-thick MDF panels, reinforced with a bracing network cleverly
designed to remove any warping including quarter-wavelength resonance reduction systems:
maintaining precision even at the highest SPL.

Includes:
2x Utopia Main 212 speaker
2x Utopia Main 212 Power Amp (incl. speaker cables)

*Port Plug accessory not included

Specifications
Performance
 Frequency response (@ -3dB)
28Hz-40kHz
Maximum SPL
(CEA2034 standard 5010kHz free-field @ 1m)
123dB
Electronic Section
 
Input Balanced XLR 10kOhm
Bass Amplifier Stage 2x500W RMS Class-D
Midrange Amplifier Stage 2x180W RMS Class-H Current Mode
Treble Amplifier Stage 140W RMS Class-H Current Mode
Nominal Power Supply 100-120V, 50-60Hz; 220-240V, 50-60Hz
Nominal Power Consumption 1000 W
Fuses T10AH/25V, T5AH/250V; 100-120V     220-240V
Crossover Frequencies 330 Hz / 2.7 kHz
Dimensions (H x W x D) 18.8 x 48.3 x 44.4 cm
Rack Height 4U
Weight 25.1 kg
Automatic Standby Mode After approx. 14 min. with no signal
Power consumption in standby mode <0.5W
Power consumption when amplifier is off <0.1W
Transducers
Woofer 2x 13" (33cm) "W"-cone
Midrange 2x 5" (12.7cm) "M"-shaped "W"-cone
Tweeter 1.5" (38mm) "M"-shaped Beryllium
Loudspeaker
Construction 30mm MDF
Finish Black
Dimensions (H x W x D) 79.6 x 105 x 46 cm
Weight 119.5 kg
Temperature Range Operating: 5-30°C; Storage: 0-50°C