FiiO DP11 Silver

The FiiO DP11 is a compact desktop CD player, digital transport and USB DAC, combining several playback and conversion functions in one full-metal device. It features a built-in Cirrus Logic CS43198 DAC with stereo RCA analogue output, as well as three digital outputs for connecting an external DAC. CDs can also be ripped directly to a USB storage device without using a computer.

The custom-designed CD drawer drive uses optimized servo firmware and a decoupled mounting system to reduce operating noise and improve disc-reading accuracy. A 3.71-inch retro-style LCD display and included infrared remote control provide convenient operation in a desktop or HiFi setup.

The built-in DAC delivers an analogue output of 2.2 Vrms via stereo RCA connectors. The DP11 can also function as a preamplifier and connect directly to active speakers or a power amplifier. For use with an external DAC, it offers balanced AES/EBU via XLR, coaxial and optical digital outputs. MQA CDs can be output as a bitstream via the optical and coaxial connections for decoding by a compatible external DAC.

As a USB DAC, the DP11 supports PCM audio up to 32-bit/384 kHz and native DSD256. Its USB ripping function saves audio CDs in lossless WAV format directly to a USB stick. Ripping requires a FAT32-formatted USB storage device with a maximum capacity of 32 GB.

Two femtosecond oscillators provide clocking, while the CD drive, digital and analogue sections are separated into dedicated circuit board areas with individual power supplies. The DP11 features an internal 100–240 V AC power supply and can alternatively be powered by an external 12 V DC linear power supply rated at a minimum of 2 A (not included).

Features
Desktop CD player, digital transport and USB DAC
Custom-designed, low-noise CD drawer drive
Cirrus Logic CS43198 DAC
Stereo RCA analogue output, 2.2 Vrms
Balanced AES/EBU (XLR), coaxial and optical digital outputs
CD ripping directly to USB storage in WAV format
USB DAC supports PCM up to 32-bit/384 kHz and native DSD256
Native MQA CD bitstream output via optical and coaxial connections
Can function as a preamplifier for active speakers or power amplifiers
Two femtosecond oscillators
3.71-inch retro-style LCD display
Infrared remote control
Full-metal housing

Specifications
Type: Desktop CD player with USB ripping and USB DAC functionality
CD drive: Custom-designed drawer drive with optimized servo firmware
DAC: Cirrus Logic CS43198
Clocking: 2 femtosecond oscillators
Analogue output: Stereo RCA, 2.2 Vrms
Digital outputs: AES/EBU (XLR), coaxial and optical
AES/EBU output: Up to 24-bit/192 kHz
Coaxial output: Up to 24-bit/192 kHz
Optical output: Up to 24-bit/96 kHz
USB DAC: PCM up to 32-bit/384 kHz, native DSD256
USB ports: Firmware updates and CD ripping
CD ripping format: WAV
Supported discs for ripping: Audio CD (CDDA)
USB storage requirements: FAT32, maximum 32 GB
MQA CD output: Bitstream via optical and coaxial outputs; external MQA decoder required
Signal-to-noise ratio: ≥ 109 dB (A-weighted)
Dynamic range: ≥ 109 dB (A-weighted)
THD+N: < 0.00068% (USB), < 0.0014% (CD)
Background noise: < 8.1 μV (A-weighted)
Frequency response: 20 Hz – 20 kHz
Frequency response deviation: < 0.1 dB (USB), < 1.3 dB (CD)
Display: 3.71-inch LCD
Power supply: Internal 100–240 V AC or external 12 V DC (minimum 2 A)
Colours: Black / Silver

Dimensions & Weight
Dimensions: 21.3 × 23 × 6.7 cm (without feet)
Weight: Approx. 1.8 kg

In The Box
FiiO DP11 CD player
Infrared remote control
USB-C cable
Power cable
Quick Start Guide
Warranty card