DPA 4098 CORE Supercardioid Ceiling Mic 16 cm (6 in) White XLR P48

Directional pattern: Supercardioid
Principle of operation: Pressure gradient
Cartridge type: Pre-polarized condenser
Frequency response: 20 Hz - 20 kHz
Effective frequency range ± 2 dB, at 20 cm: 100 Hz - 15 kHz with 3 dB soft boost at 8-15 kHz and permanent 2nd order low-cut filter at 80 Hz
Sensitivity, nominal, ±3 dB at 1 kHz: 16 mV/Pa; -36 dB re. 1 V/Pa
Equivalent noise level, A-weighted: Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
Equivalent noise level, ITU-R BS.468-4: Typ. 35 dB (max. 38 dB)
Distortion, THD < 1%: 130 dB SPL RMS, 133 dB SPL peak
Dynamic range: Typ. 110 dB
Max. SPL, THD 10%:135 dB SPL peak
Rated output impedance: 100 Ω
Minimum load impedance: 2 kΩ
Cable drive capability: Up to 100 m
Output balance principle: Signal balanced with XLR connector or DAD6001-BC XLR Adapter
Common mode rejection ratio (CMRR): > 60 dB from 50 Hz to 15 kHz
Power supply (for full performance): P48 (Phantom power)
Current consumption: Typ. 1.5 mA
Connector: XLR-3M
Color: White
Temperature range: -40°C to 45°C
Relative humidity (RH): Up to 90%
Microphone diameter: 10 mm
Capsule diameter: 5,4 mm
Microphone length: 16 cm
Weight: 75 g