DPA 4017ES Shotgun Mic, Side Cable, XLR

DPA 4017ES Shotgun Mic, Side Cable, XLR

Artiklinumber: IDS0076450

With their most tiny pre-amp design, the 4017E features an integrated cable solution wi...

Laoseis / Tarneaeg info
store

Ajutiselt otsas

local_shipping

Ajutiselt otsas. Teavituseks klõpsake »

warehouse

Ajutiselt otsas tarnija laos

Tarneaeg on meie hinnanguline aeg, mille jooksul saame kauba teile kohale toimetada kas meie enda või välise lao kaudu. See on ainult hinnanguline ja tarneaega võivad mõjutada mitmed tegurid, mis on meie kontrolli alt väljas. Jätame endale õiguse võimalikele viivitustele, läbimüügi lõppemisele ja muudatustele. Samuti jätame endale õiguse muuta tarneviisi, kui tellimus on teie valitud tarneviisi jaoks liiga suur või raske. Saate SMS-i või e-kirja, kui teie pakk on teie valitud pakiautomaadis või esinduses kättesaadav. Kui valisite kojuveo, saadetakse teile eelnev teavitus, et leppida kokku tarneaeg. Kui soovite kauba poest ise järele tulla, olete oodatud pärast SMS-i saamist, et teie tellimus on valmis.

1930.00 EUR/tk

Igakuine kuumakse alates 59.14 euro

Payment
EAN: 5713055010485 MPN:

Teised, kes ostsid DPA 4017ES Shotgun Mic, Side Cable, XLR ostsid ka

With their most tiny pre-amp design, the 4017E features an integrated cable solution with either side (4017ES) or rear (4017ER) cable entry. Being the shortest professional interference tube shotgun mic available today, the 4017E will with its only 12,5 cm length and 30 g capsule weight (121 g in total with 3 m cable and connector) be able to boom actors or capture distant voice dialogue for broadcast and video situations.

The SM4000 suspension mount is included in the package, allowing the 4017E to be hung from the ceiling and create precision spot miking of orchestra sections or ambience atmosphere. At any time and with no tools necessary it is possible to transform the basic 4017E microphone into a new configuration by combining it with another DPA microphone capsule or preamp.
DPA Microphones Supercardioid Microphone Features
Sleek shotgun for distant miking
Short and lightweight
Integrated active cable
Highly directional

 

Directional characteristicsSupercardioid, lobe-shapedPrinciple of operationPressure gradient, with interference tubeCartridge typePre-polarized condenserFrequency range20Hz - 20kHz
+/- 2dB at 60cm: 40Hz - 18kHz with typ. 3dB soft boost at 15kHzSensitivityNominal +/- 2dB at 1kHz: 19mV/Pa
-34.4dB re. 1V/PaEquivalent noise levelA-Weighted: 
Typical: 13dB(A) re. 20Pa
Maximum: 15dB(A)

ITU-R BS.468-4: 
Typical: 24dB
Maximum: 26dBS/N ratio(A-weighted) re. 1kHz at 1Pa (94dB SPL): Typ. 81dB(A)Total Harmonic Distortion (THD)< 1 % up to 137dB SPL peakDynamic rangeTypical: 124dBMax. SPLPeak before clipping: 138dBOutput impedance100OhmsMinimum load impedance2kOhmsCable drive capability328' / 99.98mOutput balance principleImpedance balancingCommon Mode Rejection Ratio (CMRR)>40dBPower supply48V Phantom power (+/-4V)Current consumption3.5mAConnectorXLR-3M
Pin 1: shield
Pin 2: signal + phase
Pin 3: phaseOutput voltage2.2V RMSPolarity+V at pin 2 for positive sound pressureTemperature range-40 to 45 deg. C / -40 to 113 deg. FRelative Humidity (RH)Up to 90%Capsule diameter0.75" / 19.05mmDimensions (Dia. x L)Microphone: 0.75 x 4.9" / 19.05 x 124.46mmWeight121g / 4.27oz