DAP Audio COM-BTX BT 5.0 Audio Receiver

Converts active speakers into Bluetooth speakers
Configurable mono/stereo output (L/R when used in pairs)
BT 5.0 with aptX, AAC, and SBC support
>8-hour battery life, chargeable via micro-USB (5 V / 1 A)
Stereo 3.5 mm jack and mono XLR output

The DAP COM-BTX BT 5.0 Audio Receiver is a wireless, high-quality receiver that can be plugged into an XLR input directly, turning an active loudspeaker into a Bluetooth speaker or adding Bluetooth reception to a mixing desk. Thanks to its modern BT 5.0 standard, it is compatible with many current mobile devices and laptops and offers an excellent range of over 40 m (130 ft) (free line of sight). Through the support of the aptX, AAC, and SBC codecs, the receiver is capable of offering a high level of sound quality. It offers a mono audio signal output via its male XLR plug, but also has a stereo output via a 3.5 mm TRS jack socket. When a pair of COM-BTX receivers is used, this mono output is configured to pass the left or right audio signal (instead of a monaural, combined signal from both channels). This is especially handy when two (active) loudspeakers are set up as a stereo pair.

The unit has a rechargeable, internal Li-ion battery and can play without an external power supply for at least 8 hours at an average signal level. Powering/charging can be done with a standard 5 V USB charger via a micro-USB socket. A USB A to micro-USB charging cable is included (a 5 V power supply is not included).

Specifications

Wireless Specifications
Wireless Audio Frequency Start 2402 MHz
Wireless Audio Frequency End 2480 MHz
RF Bandwidth 2400 MHz
Audio Specifications
THD Level < 0.1%
Signal-to-noise Ratio > 75 dB
Frequency Response Minimum 20 Hz
Frequency Response Maximum 20000 Hz
Battery
Battery Type Lithium ion
Battery Voltage 3.7 V
Capacity 0.3 Ah
Runtime @Full 8 h
Charging Time 5 h
Product Properties
LED Indicators Battery status, BT Pairing, Operation mode
Electrical Specifications and Connections
Power Supply 5 VDC
Power Connector in Micro USB
Mechanical Specifications
Height (mm) 26 mm
Width (mm) 27 mm
Length (mm) 111 mm
Housing Plastic
Weight 0.052 kg
Colour Black
Thermal Specifications
Maximum Ambient Temperature 40 °C

Included Items
Included Cables USB-A - Micro USB cable