Blackmagic Design ATEM Streaming Bridge

The Blackmagic Design ATEM Streaming Bridge for ATEM Mini Pro Streaming Switchers allows you to convert the IP signal from any ATEM Mini Pro unit into SDI and HDMI video. It features two SDI outputs and a single HDMI output and supports resolutions up to 1080p60. You can connect the Streaming Bridge directly to the streaming output of your ATEM Mini Pro, and it will provide SDI and HDMI output for use in broadcast environments, or directly to a monitor. You can also connect the streaming bridge to the same LAN that an ATEM Mini Pro is connected to, and the devices will find each other allowing you to easily stream across the network.

The downloadable software enables you control the decoding settings as well as set an IP address to the device and save that information to your computer. That information can be emailed to any computer connected to an ATEM Mini Pro, and this allows the ATEM Mini Pro to locate and stream to the Streaming Bridge connected to the internet.

Specifications:
Audio Input Connectors None 
Video Output Connectors 2 x BNC (3G-SDI / HD-SDI)
1 x HDMI (HDMI 1.4) 
Output Video Format HDMI
1080p: 23.98/24/25/29.97/30/50/59.94/60 fps 
1080i: 50/59.94/60 fps 
SDI (10-Bit 4:2:2 YUV)
1080p: 23.98/24/25/29.97/30/50/59.94/60 fps 
1080i: 50/59.94/60 fps  
Audio Output Connectors None 
Video Standard Compliance SMPTE 259M/292M/296M/424M-B/425M-A/425M-B 
Other I/O 1 x RJ45
2 x BNC Reference 
Expansion Slots None 
Video IP Decoding H.264: 1920 x 1080 
Power Connector 1 x Barrel (6 to 30 VDC) Input 
Power Consumption Device: 6 W 
Operating Temperature 32 to 104°F / 0 to 40°C 
Storage Temperature -4 to 140°F / -20 to 60°C 
Operating Humidity 0 to 90% (Recommended) 
Certifications CE, FCC, Kcc, as per Manufacturer 
Dimensions 13.41 x 9.22 x 2.29 cm 
Weight 230 g