Audac VEXO110A/W Active White

The Audac VEXO110/W is a compact, 2-way active, ported 10“ full-range speaker with a 1.7” driver. The horn’s coverage is 90° x 70°. It delivers 300W RMS and a maximum peak power of 1200W. The frequency response (-10dB) ranges from 65Hz to 20kHz, and the sensitivity (1W/1m) reaches 96dB, while a continuous sound pressure level of 121dB can be achieved.

By installing the ANI44XT Dante module (accessory), the active VEXO speakers can be integrated into a Dante-based solution and/or controlled via the Audac Touch2 app (TouchLink™).

The integrated DSP features presets for applications such as top-of-line or full-range use, but also supports WaveDynamics™ profiles (Audac’s speaker profiles). These profiles can also be modified or fine-tuned via the Audac Touch2 app for optimal room adaptation. Low power consumption in standby and inactive modes.

Constructed from 12mm plywood with polyurethane coating (DuraCoat™), full-coverage steel grille with foam front. 35mm mounting cup, carrying handle, and 10 mounting points (M10):

- 2-way, active, DSP-based 10-inch speaker
- 1.7-inch horn-loaded compression driver
- 90° x 70° coverage, swivel horn
- Peak power handling 1200 W
- Program power handling 600 W
- RMS/AES power handling: 300 W
- 12 mm plywood construction
- Full-coverage steel grille with foam front
- Stand socket, integrated carrying handle
- 10 rigging points (M10)
- Two balanced inputs, mic/line
- EtherCon input (with ANI44XT installed)
- Balanced line-out
- 230V connection: PowerCon True1 (included)
- U-bracket: Audac MBK110V/W (accessory)
- Idle power consumption: 22.5W
- Standby: 3.2W
- White finish