Audac COM24 MK2

The Audac COM24MK2 is a line-level amplifier with a total of five different zone outputs. The five zones all have the same sound level, which is set using the master volume, but they can be switched on/off individually.

The COM24MK2 has a 3-level priority function. When a signal is received on one input, all inputs with lower priority are muted.

Highest priority: Tele-Paging, external closing contact can be used to mute all other incoming signals. Used, for example, for fire alarms with priority messages. Medium priority: Chime, Remote Mic, Ch1 and Ch2 with separate switch for priority function in on mode. Lowest priority: Ch1 and Ch2 with separate switch for priority function in off mode, Ch3, Ch4, Ch5, Ch6.

COM24MK2 can be rack mounted (19" 2U), rack angles included.

Inputs:
4 microphone inputs, all with 15V phantom power and 2 channels with priority option
2 line inputs/stereo, unbalanced
2 line inputs/mono, balanced (priority + phantom) 1 link input
1 remote microphone input
Option to connect telephone line
Volume control for all input channels

Outputs:
Number of zone outputs: 5 (100V/83 ohms)
1 low impedance output (4 ohms)
1 pre-amp output
1 link output