Eliminator Lighting - Mirrorball Motor 50cm DMX

Artnr: IDS0126735
Tarneaeg: 6-20 tööpäeva.

Teave:

If you need a mirror ball motor that will allow you to synchronize up to 4 mirror balls via DMX control, then the Eliminator Lighting MBDMX-PLUS is the motor you are looking for. This motor supports mirror balls up to 50cm (20 inches) in size. Let your mind be at ease knowing that your mirror ball is safely supported by the MB DMX II motor from Eliminator Lighting.

The MBDMX-PLUS  motor will allow you to control up to 4 units simultaneously via 3-pin DMX In/Out and allow for a synchronized motor rotation and universal speed. This will results in many dramatic visual effects. Circuit Breaker protection is included so you don't need to worry about changing fuses. The MBDMX-PLUS motor is meant for indoor use only but is great for night clubs, mobile entertainers, bands, and permanent installations. Plus, there are two 3-prong Edison plus on the motor for powering pinspots or other lighting fixtures to light up the mirror ball.

The MBDMX-PLUS is equipped with 2 DMX channels: 1 channel to adjust the motor speed/direction of the mirror ball and 1 channel to turn the pinspots on and off. So when you are setting up that next dance and need the a fantastic display of light, hook up multiple mirror balls using the ADJ MB DMX II heavy-duty mirror ball motor. There is a 1/4-inch socket and a suppled infrared cable that allows control of the MBDMX-PLUS with a UC IR remote control.

Mirror ball, lighting and UC IR remote not included.

SPECIFICATION
• Heavy Duty DMX Mirror Ball Motor
• Includes two 3-prong Edison socket to power Pinspots
• 2 DMX Channels: Channel 1: Turns lighting On/Off; Channel 2: Adjustable motor speed and direction control of mirror ball
• For use with up to a 50cm (20-inch) mirror ball
• Circuit breaker protection (no need to change fuses)