Two Notes - Torpedo Captor 8 Ohm

Artnr: IDS0083934
Tarneaeg: 2-10 tööpäeva.

Teave:

Attenuator
The Torpedo Captor provides players with a constant loadbox impedance similar to a speaker’s, while remaining low enough to drive the speaker in the ultimate way possible. This setup allows the tone to be picked up by the loadbox and transmitted to the speaker without any modifications, resulting in a beautifully superb tones.

Built to Survive Life on the Road
The Torpedo Captor is designed with an aluminium and steel chassis, creating a roadworthy structure which can survive the lifestyle of a touring musician, and the workload from a studio. This reliable housing is built to last, and includes rubber feet for added stability. The durable unit also includes an active security system which protects the player and the amplifier against any overheating and inappropriate impedance matching.

Wall of Sound Plug-In
The Wall of Sound (WoS) plug-in from Two Notes offers a virtual alternative to traditional miking to achieve an authentic tone never experienced previously with simulations tools. Simply connect the amplifier’s speaker output to the Captor without modifying any of your usual settings. From there, the Torpedo’s output signal can be sent to any microphone preamplifier and recorded to your DAW, with the Torpedo WoS plugin embedded on a track. The Wall of Sound also comes with a library of 16 cabinets based on a range of popular models, ensure players can find the perfect setup for their music.

Features
Designed for use with 8 Ohm Amplifiers
Safely loads any tube amp up to 100W
Speaker thru, 20dB attenuation, or silent modes
Save space, weight, and noise on stage
Can be used for easy and fast recording
Compact design allows Captor to be placed on pedalboard or on top of amp
Use your favourite loud amp at a lower volume or completely silently
Free Wall Of Sound III plug-in (16 supplied virtual cabinets to get you started)
Powered by 48V phantom power or optional PSU (Power is required only for the XLR DI output and speaker simulation)
Specifications
General
Input Impedance: 8 Ohms
Admissible Power: 100W RMS
Speaker Sim: Guitar or Bass (Analogue)
Power: Phantom Power or DC Jack, 2.1×5.5mm, Negative Centre
Current: 5mA
Input/Output
Speaker Input: 1/4'’ Jack Unbalanced (TS, Tip/Sleeve)
Speaker Att: 1/4'’ Jack Unbalanced (TS)Attenuation: -20dB
Speaker Thru: 1/4'’ Jack Unbalanced (TS)
Line Output: 1/4'’ Jack Balanced (TRS)Impedance: Approx 1 kOhms
DI Output: XLR BalancedImpedance: 600 Ohms
Dimensions
Width: 126 mm
Height: 175 mm
Depth: 62 mm
Weight: 1kg