dj service
shopping_cart
Shure P3TERA PSM300 System Premium K3E

Shure P3TERA PSM300 System Premium K3E Shure P3TERA PSM300 System Premium K3E Shure P3TERA PSM300 System Premium K3E Shure P3TERA PSM300 System Premium K3E Shure P3TERA PSM300 System Premium K3E Shure P3TERA PSM300 System Premium K3E

Shure - P3TERA PSM300 System Premium K3E

Artnr: IDS0080663
Tarneaeg: 2-7 tööpäeva.

Shure
913.00 EUR/pcs

Igakuine kuumakse alates 30.64 euro

Teave:

PSM®300 Stereo Personal Monitor Systems deliver reliable wireless freedom to every corner of the stage. Patented Audio Reference Companding ensures the clearest sound, with ultra-low noise and no artifacts.

Easy to setup and operate, PSM 300 systems offer one-touch frequency scan and sync to find and assign a clean wireless channel. Adjust the volume and use MixMode® technology or stereo mode to create a personal mix from two channels of audio.
Features
24-Bit digital audio provides clear, detailed sound
Up to 90 dB signal-to-noise ratio
Exceptionally wide stereo separation
Solid analog RF connection over a 300 ft (90 m) range
Half-rack, single-channel transmitter includes rackmount kit
P3R bodypack systems available with SE112 Sound Isolating™ Earphones
P3RA professional bodypack systems available with SE215 Sound Isolating Earphones

PSM300 System overview
RF Carrier Range 488–937.5 MHz
(Varies by region, see frequency range and output power table)
Compatible Frequencies
Per band up to 15
Tuning Bandwidth 24 MHz maximum (Note: varies by region)
Operating Range
Environment dependent 90 m (300 ft)
Audio Frequency Response 38 Hz–15 kHz
Signal-to-Noise Ratio
A-weighted 90 dB (typical)
Total Harmonic Distortion
ref. ±34 kHz deviation @1 kHz <0.5% (typical)
Companding Patented Shure Audio Reference Companding
Spurious Rejection
ref. 12 dB SINAD >80 dB (typical)
Frequency Stability ±2.5 ppm
MPX Pilot Tone 19 kHz (±1 Hz)
Modulation FM*, MPX Stereo
(ref. ±34 kHz deviation @ 1 kHz)
Operating Temperature -18 °C (0 °F) to +63 °C (145 °F)
P3T Wireless Transmitter
RF Output Power 10, 20, 30 mW
Note: varies by region
RF Output Impedance 50 Ω (typical)
Net Weight 783 g (27.6oz.)
Dimensions 43 × 198 × 172 mm (1.7 × 7.8 × 6.8 in.), H × W × D
Power Requirements 12–15 V DC, 260 mA maximum
Audio Input
Connector Type 6.35 mm (1/4") TRS
Polarity Tip positive with respect to ring
Configuration Electronically balanced
Impedance 40 kΩ (actual)
Nominal Input Level Switchable, +4 dBu, -10 dBV
Maximum Input Level +4 dBu: +22 dBu
-10 dBV: +12.2 dBu
Pin Assignments Tip=hot, Ring=cold, Sleeve=ground
Phantom Power Protection Up to 60 V DC
Audio Output
Connector Types 6.35 mm (1/4") TRS
Configuration Electronically balanced
Impedance Connected directly to inputs
P3RA Professional Wireless Bodypack Receiver
Active RF Sensitivity
(at 20 dB SINAD) 2.2 μV
Image Rejection >90 dB
Adjacent Channel Rejection >60 dB
Intermodulation Attenuation >50 dB
Blocking >60 dB
Audio Output Power
1 kHz @ <1% distortion, peak power, @32 Ω 80 mW (per output)
Minimum Load Impedance 16 Ω
Headphone output 3.5 mm (1.8") stereo
Net Weight 196 g (6.9 oz.)
(with batteries)
Dimensions 99 × 66 × 23 mm (H × W × D)
Battery Life
(continuous use) 4–5.5 hours, AA batteries
5.5–7 hours, SB900A battery