+372 537 358 82 / info@djservice.ee
Cart
Ostukorv: tühi

dj service
Tascam TM-280

Tascam - TM-280

Artnr: IDS0073362
Tarneaeg: 7-14 tööpäeva.

234.00 EUR/pcs

Information:

The more you know the tone of the condener microphone, the more fun it gets!

A fine microphone is the doorway to a great recording, and TASCAM's TM-280 Studio Condenser Microphone has been designed to capture each and every nuance of your performance faithfully and accurately. Featuring a switchable high pass filter and a 10dB pad, this large diaphragm condenser microphone is sensitive enough for the most demanding acoustic sessions while being robust enough to handle the most powerful rock and roll.

 

Easily gets a precise, high-definition sound quality from a condenser microphone

TM-280 is a condenser-type microphone, which is quite different from the dynamic microphone which usually being used in live performances. The diaphragm operates due to the pneumatic vibration. Inside of a dynamic microphone, the voice coil operates with the diaphragm, which increases the weight of the entire part. On the other hand, the condenser microphone incorporates a diaphragm in the either side of the electrode in an electrical part referred to as condenser, realizing a lightweight structure. This allows excellent follow-up performance, greatly contributing to high-precision sound. Thus the mechanism to convert into electrical signals is completely different between the two: the dynamic microphones are powered by electromagnetic induction to obtain electrical signals, whereas the condenser microphones take out the static signals. To give the condenser the potential difference, power supply is required.

Features at a glance
Condenser-type microphone
Cardioid (Unidirectional)
34-mm aluminum diaphragm
Suspension shockmount
Pop filter
Flight case


Spec description
Model Condenser (34mm Pure Gold-sputtered diaphragm)
Directivity Cardioid (Uni-directional)
Frequency response 20Hz to 20,000Hz
Output impedance 50Ω ±30%
Load impedance > 1kΩ
Sensitivity –36dB ±2dB (0dB=1V/Pa at 1kHz)
Max. SPL 135dB
S/N ratio 80dB
Connector 3 pin XLR, Male × 1
Phantom power 48V
Dimensions (φ×L) φ1.98" × 7.4" / φ50.5 × 187.5 mm
Weight 14.7 oz. / 417 g (Microphone body only)
Accessory Suspension shockmount (Screw φ5/8"), Pop filter, Flight case, 5/8 to 3/8 conversion adapter