Ibanez - RG470DX-TMN

Artnr: IDS0124125
Tarneaeg: Tarneaja prognoos 2024-07-26 »

Teave:

RG470DX-TMN. (Tokyo Midnight). Ibanez electric guitar.

An RG guitar from the Ibanez Standard range. Well-built guitars for those who want the Ibanez feel and look but at a lower price without compromising too much on quality. The guitar has a Wizard III neck which is a slightly thicker version of the popular Wizard profile, it is also a slightly rounder and softer profile than Wizard and Super Wizard. It also has a radius of 400mm instead of the Wizard neck's 430mm. A very nice neck for those who want a little more wood in their hand without the neck being thick, stiff and clumsy. A fast and very easy-to-play neck equipped with 24 well-ground jumbo frets.

The body is made of Meranti (mahogany), which is a fairly light wood with an even frequency reproduction over the entire register. This makes it a wood that, in terms of sound, is easy to color in many different directions and get many different kinds of sounds out of it. The even frequency reproduction also makes it very suitable for distorted sounds, it glues the sound together nicely without it being either scattered or indistinct.
The bridge is Ibanez's excellent Edge-Zero II, a stable bridge that holds the tone incredibly well.

Specs:
• Wizard III Maple neck.
• Mercanti body.
• Jatoba fretboard w/Sharktooth inlay.
• Jumbo frets.
• Edge-Zero II tremolo bridge.
• Quantum (H) neck mic.
• Quantum (S) mid.mic.
• Quantum (H) stable mic.
• Black hardware.
Matching case: M300C
Matching bag: Ibanez IGB540-BK.

Neck:
• Scale: 648mm/25.5".
• Width at Nut: 43mm.
• Width at Last Fret: 58mm.
• Thickness at 1st: 19mm.
• Thickness at 12th: 21mm.
• Radius: 400mmR.

The pickups are connected to a 5 -mode switch with common tone and volume control.
The modes you can access on the switch are,
1. Bridge mic in series*
2. Bridge mic split** together with center mic
3. Middle mic
4. Neck mic split together with center mic
5. Neck mic in series

* Series , both coils on the mic are connected in series one after the other and the mic gives as much output and power as it is designed for. If you read about the mic on the manufacturer's website, this is the mode that is described. The mic is then hum canceling and completely silent.
** Split, the mic being split means that one of the mic's two coils is turned off and becomes a singlecoil (only one active coil). This means you get half the output and power of the mic when the coils are connected in series. The mic loses its hum cancellation ability when a coil is switched off But modes 2 and 4 are hum canceling and still quiet when the active coil on the stand (mode 2) or neck mic (mode 4) is connected in parallel with the center mic.
It produces a softer, brighter and more open sound with a cleaner, clearer and firmer bass. A sound that suits very well clean and semi-distorted sounds (or for all intents and purposes, to open up even a hard-distorted sound). Since only one coil is active, you can choose whether you want the active coil towards the bridge or towards the neck, which affects how it sounds, warmer closer to the neck and brighter closer to the bridge.