QSC - WL2102

Artnr: IDS0118857
Tarneaeg: Kaup on ajutiselt otsas. Kontakteeruge meiega tarneaja prognoosiks. »

Teave:

QSC's WL2102-w is a full range line array loudspeaker system designed for use in a wide variety of venues, ranging from ballrooms, theaters and nightclubs to concert halls, houses of worship and arenas. This WideLine™ series speaker offers an open, natural sound quality and exceptionally wide 140° horizontal coverage pattern - the widest of any line array system currently available.

A three transducer system that can be operated in either biamplified or triamplified modes, the WL2102-w features two 10" low-frequency transducers and one 3" driver. Both 10" diameter LF transducers are used to cover the lowest frequency range. One driver covers only low frequencies while the range of the other extends through the mid frequencies to the mid/high crossover point. The use of a single midrange transducer allows the horizontal coverage pattern to remain as wide as possible and assures smooth response both on and off axis at the transition to the diffraction slot loaded high frequency section. Biamplification uses passive elements to affect the required frequency response shading of the low-frequency drivers and offers reduced amplifier channel counts and simplified wiring. Triamplification allows the required low-frequency shading to be controlled with greater precision via active electronics and is recommended where maximum output and highest sound quality are required.

Features
Patented multiple aperture diffraction slot waveguide provides exceptionally wide 140° horizontal coverage and a near ideal vertical line source
Exceptionally high output capability in a very compact form factor
May be operated as a bi-amplified or tri-amplified system. DSP settings are available on Q-SYS, SC-28, PLD amplifiers and CXD amplifiers
Dual 10" long-excursion, high-power, low-frequency transducers
Single 3" diaphragm neodymium compression driver
Birch ply enclosure with black finish
Fully captive hardware design incorporates all components necessary for box to box rigging
Specifications
Configuration: Biamp or Triamp mode
Transducers:HF: 1.4" exit, 3" titanium diaphragm, neodymium magnet assembly
LF: 2 x 400W, 16 Ω 10" woofer, 3" voice coil, ceramic magnet assembly
Frequency Response (±3 dB): 55 Hz to 18 kHz (with recommended DSP processing)
Frequency Response (-10 dB): 48 Hz to 20 kHz (with recommended DSP processing)
Nominal Impedance:HF: 16 Ω
LF biamp mode: 8 Ω
LF triamp mode: 16 Ω (x 2)
Continuous Power Capacity:HF: 80W (2 hours, AES1984-2 method, 1 to 10 kHz)
LF biamp mode: 600W (2 hours, AES1984-2 method, 80 to 800 Hz)
LF triamp mode: 400W (×2) (2 hours, AES1984-2 method, 80 to 800 Hz)
Max Recommended Power:HF: 300W @ 16 Ω
LF bi-amp mode: 1400W @ 8 Ω
LF tri-amp mode: 700W @ 16 Ω (x 2)
Sensitivity (1W at 1 m):HF: 107.5 dB (single cabinet measured in free space)
LF: 98 dB (single cabinet measured in free space. LF drivers connected in parallel)
Maximum Output (SPL at 1 m):Continuous: HF: 127 dB / LF: 127 dB
Peak: HF: 133 dB / LF: 133 dB
Maximum Output (dB SPL at 1 m) Continuous / Peak:HF: 126 dB / 132 dB
LF: 122 dB / 128 dB
Nominal Coverage:Horizontal: 140°
Vertical: Dependent on number of elements used
Cabinet Type: Ported, trapezoidal
Material: Baltic birch plywood
Grille: Perforated, formed powder coated steel
Connectors: (2) Neutrik speakON® NL8 in parallel
Attachment Points: Integral, adjustable rigging system, vertical splay adjustable
Weight:Net: 83 lbs. (37.7 kg)
Shipping: 91 lbs. (41.4 kg)
Dimensions (H x W x D): 10.75" x 27.5" x 20.25" (27.3 x 69.85 x 51.43 cm)