dj service
shopping_cart
DAP Audio COM-BTX BT 5.0 Audio Receiver

DAP Audio COM-BTX BT 5.0 Audio Receiver DAP Audio COM-BTX BT 5.0 Audio Receiver DAP Audio COM-BTX BT 5.0 Audio Receiver

DAP Audio - COM-BTX BT 5.0 Audio Receiver

Artnr: IDS0121142
Tarneaeg: 2-7 tööpäeva.

Dap Audio
91.00 EUR/tk 55.00 EUR/tk

Igakuine kuumakse alates 4.74 euro

Teave:

Converts active speakers into Bluetooth speakers
Configurable mono/stereo output (L/R when used in pairs)
BT 5.0 with aptX, AAC, and SBC support
>8-hour battery life, chargeable via micro-USB (5 V / 1 A)
Stereo 3.5 mm jack and mono XLR output

The DAP COM-BTX BT 5.0 Audio Receiver is a wireless, high-quality receiver that can be plugged into an XLR input directly, turning an active loudspeaker into a Bluetooth speaker or adding Bluetooth reception to a mixing desk. Thanks to its modern BT 5.0 standard, it is compatible with many current mobile devices and laptops and offers an excellent range of over 40 m (130 ft) (free line of sight). Through the support of the aptX, AAC, and SBC codecs, the receiver is capable of offering a high level of sound quality. It offers a mono audio signal output via its male XLR plug, but also has a stereo output via a 3.5 mm TRS jack socket. When a pair of COM-BTX receivers is used, this mono output is configured to pass the left or right audio signal (instead of a monaural, combined signal from both channels). This is especially handy when two (active) loudspeakers are set up as a stereo pair.

The unit has a rechargeable, internal Li-ion battery and can play without an external power supply for at least 8 hours at an average signal level. Powering/charging can be done with a standard 5 V USB charger via a micro-USB socket. A USB A to micro-USB charging cable is included (a 5 V power supply is not included).

Specifications

Wireless Specifications
Wireless Audio Frequency Start
2402 MHz
Wireless Audio Frequency End
2480 MHz
RF Bandwidth
2400 MHz
Audio Specifications
THD Level
< 0.1%
Signal-to-noise Ratio
> 75 dB
Frequency Response Minimum
20 Hz
Frequency Response Maximum
20000 Hz
Battery
Battery Type
Lithium ion
Battery Voltage
3.7 V
Capacity
0.3 Ah
Runtime @Full
8 h
Charging Time
5 h
Product Properties
LED Indicators
Battery status, BT Pairing, Operation mode
Electrical Specifications and Connections
Power Supply
5 VDC
Power Connector in
Micro USB
Mechanical Specifications
Height (mm)
26 mm
Width (mm)
27 mm
Length (mm)
111 mm
Housing
Plastic
Weight
0.052 kg
Colour
Black
Thermal Specifications
Maximum Ambient Temperature
40 °C
Included Items
Included Cables
USB-A - Micro USB cable