dj service
shopping_cart
Sontronics DM-1B condenser mic

Sontronics - DM-1B condenser mic

Artnr: IDS0099147
Tarneaeg: Kaup on ajutiselt otsas. Kontakteeruge meiega tarneaja prognoosiks. »

Sontronics
370.00 EUR/tk

Igakuine kuumakse alates 15.18 euro

Teave:

Representing over two years of research, development and field testing, Sontronics DM-1B for kick drum and our pencil condensers (DM-1T for tom and DM-1S for snare) take Sontronics further into application-specific miking.
 
The DM-1B is a large-diaphragm, end-fire condenser microphone that has been designed specifically to capture and reproduce the various characteristics of a kick drum: the beater click, the heavy thump, the boomy decay and so on.
 
Sontronics DM-1B has a switchable -15dB pad that allows the microphone to deal with a whopping 155dB, and its sturdy build plus the aluminium flightcase mean it will perform equally well in the studio and in live applications.
 
The DM-1B and our other drum mics were all tested to destruction before launch, by various session drummers, live musicians and producers, including Flood (U2, Killers, Arctic Monkeys) who found that the DM-1B also gives excellent results on bass instruments, especially bass guitar cabs.

For a kick drum or bass instrument stand that stands out in the mix and is comparable to that offered by mics costing up to ten times the price, the Sontronics DM-1B is the obvious choice.

Features
large-diaphragm end-fire condenser mic for kick drum and bass instruments
supplied with its yoke-style shockmount in a sturdy aluminium flightcase
road-tested by producers Flood, Alan Moulder and Mark Rankin
covered by Sontronics LIFETIME WARRANTY
ideal for kick drum but also gives fantastic results on other bass instruments especially bass guitar cabs
Specifications
Polar pattern: Cardioid (end-fire)
Frequency response: 20Hz - 20kHz
Pad: 0, -15dB
Sensitivity: 6mV/Pa -45dB ±1dB (0dB = 1V/Pa @ 1,000Hz)
Impedance: 200 Ohms
Equivalent noise level: 14dB (A-weighted)
Max SPL (for 0.5% THD @ 1,000Hz): 155dB (with -15dB pad switched in)
Power source: Phantom power 48V ±4V
Connector: Three-pin XLR
Supplied with: Alumnium flightcase