DPA - CORE 4060 Stereo Microphone Kit

Artnr: IDS0076672
Tarneaeg: Kaup on ajutiselt otsas. Kontakteeruge meiega tarneaja prognoosiks. »

Teave:

Directional Pattern Omnidirectional
Principle of Operation Pressure
Cartridge Type Pre-polarized condenser
Frequency Range 20 Hz to 20 kHz (±2 dB)
Soft-Boost Grid: 20 Hz to 20 kHz, 3 dB soft boost at 8 to 20 kHz
High-Boost Grid: 20 Hz to 20 kHz, 10 dB boost at 12 kHz
Sensitivity Nominal, ±3 dB at 1 kHz: 20 mV/Pa; -34 dB re. 1 V/Pa
Equivalent Noise Level A-Weighted: Typ. 23 dBA re. 20 µPa (max. 26 dBA)
ITU-R BS.468-4: Typ. 35 dB (max. 38 dB)
Signal to Noise Ratio A-Weighted, re. 1 kHz at 1 Pa (94 dB SPL)
Typ. 71 dBA
Total Harmonic Distortion (THD) Core: Typ. 129 dB
Dynamic Range (Typical) Core: 106 dB
Max SPL Peak before Clipping: 134 dB
Output Impedance 30 to 40 Ohms
Cable Drive Capability Up to 984' / 300 m
Power Supply For Wireless Systems: Min. 5 V max. 50 V through DPA adapter
With DAD6001-BC/DAD6024/DAD4099: 48 V phantom power ±4 V for full performance
Connector MicroDot
Microphone Diameter 0.21" / 5.4 mm
Microphone Length 0.5" / 12.7 mm
Cable Length 5.9' / 1.8 m
Polarity Positively increasing sound pressure produces positive going voltage on MicroDot pin
Temperature Range -40 to 113°F / -40 to 45°C
Relative Humidity Up to 90%
Weight 0.26 oz / 7.5 g, including cable and MicroDot connector