dj service
shopping_cart
djservice.ee »  Tootja » ART » MyMonitorII
ART MyMonitorII

ART - MyMonitorII

Artnr: IDS0082134
Tarneaeg: Kaup on ajutiselt otsas. Kontakteeruge meiega tarneaja prognoosiks. »

ART
130.00 EUR/pcs

Igakuine kuumakse alates 8.23 euro

Teave:

The MYMonitorII allows blending of any microphone source with any stereo source in a convenient personal monitoring solution. The microphone thru provides direct connection to any mixer and will pass phantom power from the board for powering condenser microphones.

Built for maximum flexibility, the ARTcessories MyMonitorII can be powered with the supplied 12vDC power supply, or from an internal 9v battery.

The pop-less microphone on/off switch lets you locally mute the microphone. The headphone section has independent 1/8-inch and ¼-inch TRS outputs with plenty of drive for both.
Key Features
Blends any Microphone, Instrument and Stereo Source for Personal Monitoring
 Microphone Input and Thru with Pop-less On/Off Mute Switch
 Passes Phantom Power for Operation with Condenser Microphones
 Instrument/Line Input and Thru Jacks
 Stereo Monitor Input with Blend Control
 Headphone output section has 1/8-inch and 1/4-inch Jacks
 High Performance, Low Noise Circuitry
 9v battery and 12vDC Power Operation
Specifications
Maximum Input Level
+6 dBu (mic), +12 dBu (instrument),
+32 dBu (line), >+32 dBu (stereo monitor)
Input Impedance
4.5k Ω (mic), 1m Ω (instrument),
100k Ω (stereo monitor, line)
Maximum Output Level
+12dBu (headphones)
Maximum Gain
47dB (mic), 41dB(instrument), 21dB(stereo monitor, line)
Output Impedance
47 Ω (each headphone output)
Input Connections
XLR balanced microphone, 1/4-inch stereo monitor,
1/4-inch mono instrument/line input
Output Connections
XLR balanced microphone, 1/4-inch and 1/8-inch headphones, 1/4-inch mono instrument/line thru
Signal To Noise Ratio
> 96dB
Power
12VDC @ 150mA (Adaptor Included) or 9VDC Battery
Dimensions
1.85″H x 4.6″W x 4.1″D (47mm x 117mm x 104mm)
Weight
1.10 lbs (0.50kg)