dj service
shopping_cart
Audix M1250BW-HC

Audix - M1250BW-HC

Artnr: IDS0047685
Tarneaeg: Kaup on ajutiselt otsas. Kontakteeruge meiega tarneaja prognoosiks. »

Audix
718.00 EUR/tk

Igakuine kuumakse alates 24.06 euro

Teave:

Audix M1250BW-HC

Miniature Hypercardioid Condenser Microphone with RFI Immunity - White

 

 

M1250BW-HC is a mini condenser microphone by Audix production. This microphone has a white color and type hypercardioid polar pattern. With the integration of preamp and detachable cable thorough, M1250BW have a very good immunity for RF interference caused by mobile phone or any GSM device. AUDIX M1250BW which was equipped with a cardioids condenser capsule and the transducer is most appropriately used as a microphone overhead, choirs, vocals group, acoustic instruments, ambient recording space, areas of the symphony, presentations, and on cymbals/percussion.

 

 

Audix M1250B series models are also available with hypercardioid polar pattern, supercardioid, omni-directional or highly suitable for use in various applications live, studio, or broadcast. Audix M1250BW can be purchased at the vincent maestro. The most recommended online shop for lighting equipment and audio professional in Surabaya, Indonesia. All other information about the features and specifications M1250BW can be obtained at the following information:

 

 

 

Features:

 

  • White color, small, lightweight, low profile
  • Miniaturized integrated preamp circuitry
  • No external power adapter needed
  • 12mm gold vapor diaphragm
  • Immune to RF interference
  • Extremely low noise, high SPL handling
  • Available with a cardioid, hypercardioid, omni or supercardioid capsule

 

 

Spesifications:

 

  • Polar Pattern: Hypercardioid
  • Transducer Type: Condenser
  • Frequency Response: 50Hz-19kHz
  • Optional: Hypercardioid, Omni, Supercardioid
  • Output Impedance: 150 ohms
  • Sensitivity: 10 mV/Pa @ 1k
  • Signal/Noise Ratio (A-weighted): 73 dB
  • Equivalent Noise Level (A-weighted): 21 dB
  • Maximum SPL @ .5% THD: 140 dB
  • Dynamic Range: 119 dB
  • Power Requirements: 18-52 V
  • Connector: 3 pin mini-XLRM
  • Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
  • Housing/Finish: Machined brass/powder coat
  • Weight: 0.7 oz
  • Length: 2.1"