Radial - SW8-USB - USB Interface and Auto-Switcher (MAC OS)

Artnr: IDS0107295
Tarneaeg: 3-10 tööpäeva.

Teave:

The Radial Engineering OX8 is a high-performance 8-channel microphone splitter that lets you send a microphone signal to as many as three consoles at the same time. Each channel is configured with a balanced input, a direct out which also serves as a return path for 48V phantom power, a thru-put with ground lift switch and a transformer isolated output to eliminate hum and buzz, making this tool ultra quiet.

For maximum flexibility, several connector options are available. Inputs may be accessed via the front panel, using standard XLRs, or the rear panel, with a choice of either 25 pin D-subs (wired to the Tascam standard) or Euro screw-down terminal connectors (Note: Wire-end terminal blocks are sold separately). Outputs include D-subs and Euro connectors, which are also located on the rear panel. These make it easy to connect to popular multi-track recording systems while providing easy termination for permanent installations.

Although primarily designed for mic signals, the OX8 is equipped with a -36dB pad to accommodate line level sources, making the OX8 highly adaptable for all types of signal splitting. Several connector options are available to enhance flexibility. Inputs may be accessed via the front panel using standard XLRs, or via the rear panel with a choice of either 25 pin D-subs wired to the ProTools standard or screw-down Phoenix/Euro terminals which are commonly used in permanent installations.

Because the OX8 is 100% passive, it does not require any power whatsoever to make it work. You simply plug in and the transformers do all the work. The OX8 comes standard with Eclipse ET-MS10 mic bridging transformers or may be special ordered with premium transformers for the ultimate purist. Each channel is further advantaged with an ultra-short signal path and built in RF filters to ensure absolute quiet performance even in the most noise-prone environments.

The Radial Engineering OX8 is a professional recording tool that is equally at home in live touring, permanent installations or broadcast. For massive, high-performance routing possibilities, get the OX8 today!

Features
Balanced 8-channel mic splitter in single space 19" frame
24 output channels (3 outputs per input)
Delivers exceptional audio without artifact
Eliminates hum and buzz caused by ground loops
-36 dB Pad allows for line level inputs
Ideally suited for live recording, PA and broadcast
Equipped with Radial Eclipse MS10 transformers
Specifications
Audio Circuit Type: Passive transformer-based mic level splitter
Transformer: Radial Eclipse MS10
Shield: Durable Faraday, MuMETAL can
Number of Channels: 8 channel 3-way splitter (1-in/3-out)
Frequency Response: 20 Hz - 18 kHz (+0 dB/-3 dB)
Dynamic Range: 140 dB
THD + Noise: 0.005% @ 1 kHz
Phase Deviation: 1° @ 100 Hz; 5° @ 20 Hz
CMRR: -114 dB @ 60 Hz
Inputs: XLR, Euroblock, DB-25
Input Impedance: 150 Ω, balanced
Input Pad: -36 dB (allows line-level sources)
Maximum Input: +2 dBu @ 20 Hz
Outputs: Euroblock, DB-26
Output Impedance: 150 Ω, balanced
Ground Lift: Disconnects XLR pin-1 at direct-2 and isolated output
XLR Configuration: AES Standard (pin-2 hot)
DB-25 Configuration: Tascam analog audio standard
Construction: 14-gauge steel
Finish: Durable powder coat
Dimensions (H x W x D): 1.75" x 19" x 6" (4.45cm x 48.25cm x 15.25cm)
Weight: 7.5 lbs (3.4 kg)
Conditions: For use in dry locations only, between 5° C and 40° C
Warranty: Radial 3-year, transferable