+372 537 358 82 / info@djservice.ee
Ostukorv: tühi

dj service
SPL Phonitor 2 Black

Phonitor 2 Black

SPL - Phonitor 2 Black

Artnr: IDS0026642
Tarneaeg: Kaup on ajutiselt otsas. Kontakteeruge meiega tarneaja prognoosiks. »

1467.00 EUR/tk

Igakuine kuumakse alates 44.36 eurot


We are uber-happy to introduce the successor of our legendary Phonitor headphone preamp. We have kept all proven features while incorporating some major improvements — as such, the new Phonitor can be used as the ultimate monitor controller and preamp for three different sources. Likewise, we revised the 120-Volt technology in order for it to perform better, which resulted in our measurement gear being outclassed.


  • Preamplifier/Monitor Controller functionality
  • Suited for all headphones and impedances
  • Volume remotely controllable

Special Features

  • The Reference ? The Phonitor2 sets new technical and sound standards.
  • Dual-channel 120 Volt amp for headphones and active loudspeakers or power amps
  • For dynamic and balanced headphones
  • Optimallyy suited for low-impedance headphones starting from 10 Ohm (40 Ohm for balanced headphones)
  • Remote volume control with motor potentiometer
  • High-resolution laterality correction compensates right/left hearing differences
  • Switchable level adjustment (consumer to professional level, 1:1, +6dB, +12 dB)


  • Stereo preamplification and headphone amplification for three sources
  • High-quality music playback at home
  • Central monitoring unit with phase reverse L/R , solo L/R, mono switch functions
  • Laterality control to compensate hearing imbalances
  • Headphone amplifier for all headphone systems and impedances (from 10?)
  • Loudspeaker simulation with headphones
  • Monitoring alternative in studios and mobile units
  • Adjustment of headphone playback to match familiar monitor speakers
  • Mobile reproduction of usual monitoring conditions


XLR connectors, electronically balanced
Impedance: bal. Ca. 20?k?, unbal. Ca. 10?k?
Max. Input Level: +32,5?dBu

Monitor/Line Outputs: XLR connectors, electronically balanced
Frequency Range: 4?Hz to 480?kHz ( -3?dB)
CMR: -82?dBu (at 1?kHz, 0dBu input level and unity gain)
Crosstalk at 1?kHz: -106?dB
THD&N at 1?kHz: 0,00085?% (at 0dBu input level and unity gain)
Noise: Unweighted -101,87 dB; A-weighted -104,76 dB; CCIR: -96,1 dB
Dynamic Range: 134,37?dB

Headphone Output:
6.3-mm TRS connector
Pin wiring: Tip = Left, Ring = Right, Sleeve = GND
Impedance: 0,18 ?
Attenuation Factor: 180 @ 40Ohm
Frequency Range: 4?Hz to 480?kHz ( -3?dB)
CMR: -106?dBu (at 1?kHz, 0dBu input level and unity gain)
Crosstalk at 1?kHz: -106?dB
THD&N at 1?kHz: 0,00091?% (at 0dBu input level and unity gain)
Noise: Unweighted -101,12 dBu; A-weighted -?103,98 dBu; CCIR -95,02 dBuDynamic Range: 133,62?dB

Power Amplifier:
Voltages: 230?V AC, 50?Hz / 120?V AC, 60?Hz
Power Consumption: max 23,7?VA
Fuses: 100-120?V AC: T 1?A / 200-240?V AC: T 630?mA

Measurement & Weight:
Height x Width x Depth: 99 x 277 x 305 mm / 3.9 x 10.9 x 12 in
Weight: 4,3?kg / 9.5 lbs
0?dBu = 0,775?V.