Sonarworks - SoundID Reference for Speakers & Headphones with Mic

Artnr: IDS0104715
Tarneaeg: 2-7 tööpäeva.

Teave:

Key Features
Studio reference sound for your existing headphones and speakers
More than 280 headphone calibration profiles
Completely flat frequency response across all audible frequencies
Simulates over 20+ speakers for accurate mix translation
Treat your room with the included measurement microphone

Total precision
The Sonarworks Calibrated Measurement Microphone lets you hear your speakers with unparalleled precision. Get an accurate acoustic image from a pre-polarised electret-condenser capsule, and treat your room with ease. From mixing to mastering, you'll hear every single detail.

No colouration. No inaccuracies. The Sonarworks Measurement Microphone delivers superior audio capture across a flat, extended frequency response. Its unobtrusive housing design prevents disturbances in your sound field, so you won't get a spike in the measured pressure level.

Ready to go - as soon as you open the box. The measurement mic has been tested by Sonarworks acousticians to eliminate sample-to-sample irregularities. Files for 0-degrees and 30-degrees calibration are included.

What’s included
SoundID Reference app for Speakers & Headphones
SoundID Reference DAW plugin (AU, VST, AAX) for Headphones
Averaged profiles for 280+ supported headphone models
Activation key for the product license: the product can be activated and used on 1 machine
SoundID reference measurement microphone
Microphone calibration file for 30-degree off-axis measurements in Sonarworks software native format (.swmic)
Microphone calibration file for 0-degrees on-axis measurements in .txt format

System requirements
Mac: macOS 10.12 or later
PC: Windows 8 (64-bit) or later
Sonarworks supported or Sonarworks individually calibrated headphones
2.0 or 2.1 stereo speaker system
An audio interface featuring +48V Phantom Power and 44.1 kHz sample rate capability
With SoundID Reference during the speaker measurement process, the audio hardware setup must consist only of a single external hardware device
XLR to XLR audio cable

Features
Sonarworks SoundID Reference for Speakers & Headphones
Calibrate almost all headphones with profiles for over 280 supported models
Lets you save as many profiles as needed for speaker calibration
Easily make target curve adjustments in real time
Accurate mix translation with over 20 device simulations
Flexible filter modes with Zero Latency, Mixed, and Linear Phase on board
Wide range of DSP processing modes, including Mono, Dry/Wet, and Safe Headroom
Various control options with MIDI mapping in the SoundID Reference app
Switch between your favourite device/channel pair combinations with user preset functionality
Sonarworks Calibrated Measurement Microphone
Perfect accuracy from a pre-polarised condenser capsule
Flawless operation with freedom from sample-to-sample irregularities
Uniform audio capture with an omnidirectional polar pattern
Picks up every detail across a wide frequency range (20Hz – 20kHz)
Fine-tune your microphone with included calibration profiles
Precisely tested by Sonarworks acousticians against an ANSI certified measurement microphone

Specifications
Product code: SW-XREF20R5
Sonarworks Calibrated Measurement Microphone
Capsule type: Pre-polarised electret-condenser
Frequency response: 20Hz – 20kHz
Polar pattern: Omnidirectional
Sensitivity: -37dB/Pa (14mV)
Self noise: 24dB
S/N ratio: 70dB
Dynamic range: 106dB
Maximum SPL: 132dB