+372 537 358 82 / info@djservice.ee
Cart
Ostukorv: tühi

dj service
SPL Transducer

SPL - Transducer

Artnr: IDS0014458
Tarneaeg: Kaup on ajutiselt otsas. Kontakteeruge meiega tarneaja prognoosiks. »

881.00 EUR/tk

Information:

The SPL TRANSDUCER Guitar Amplifier power attenuator with analogue speaker simulation and speaker action. Supplants your guitar speaker cabinet and microphone(s).

•The Transducer supplants at least four loudspeaker cabinets, two high quality microphones, their preamp, a good room ambiance, and at any time, the amplification may be cranked up
•The Transducer offers a unique ability for the guitarist during production performance to hear a true playback and then adjust his playback to the moment in the control room
•Fully analog construction for the highest authenticity in sonic quality and outstanding playability throught direct, latency-free response
•Critical parts are carefully selected for exceptional sonic characteristics
•The Transducer replaces all major cabinet and microphone types, thereby enormous savings in cost and space in transport, on stage, or in the studio
•Processing is independent from absolute volume levels, which means that no recording room is necessary and ear-saving work is possible everywhere and at any time
•Sonically much more flexible than a fixed cabinet/mike set in that all important loudspeaker and cabinet types, as well as dynamic and condenser microphones can be simulated
•Multiple guitar tracks can be “stacked”
•200-Watt Power Soak
•Resulting recorded sounds are independent from room characteristics – what you hear is what you get
•Signals for live mixes are at recording quality level and free from crosstalk from other sound sources
•As on-stage recording loudspeakers are not needed any in-ear monitoring is done at safehearing levels as the cabinet must not be drowned out
•Significantly less time spent and much more efficiency and convenience in equipment setup, preparation, and working with sound variations
•Working procedures and connections follow customary standards of amp and cabinet sets
•Live application advantage: It is extremely easy to achieve a dry-wet-wet setup. The amp signal passes via “Speaker Thru“, for a dry direct signal and the Transducer line out is connected to the effects machine; FX left and right out provides a wet signal on stage
•Live application advantage: two line outs with separate balancing drivers - the Transducer provides for both FOH and stage routings
•Input - Speaker Input: 1/4 inch Jack connection, Impedance 8 Ohms, Max. Input Load 100 W RMS, 200 W Peak
•Speaker Thru 1/4 inch Jack connection
•Pre Simulation Out 1/4 inch Jack connection, Impedance ca. 1 kOhm
•Mic Level Output XLR, electronically balanced, Impedance unbalanced ca. 600 Ohms, Impedance balanced ca. 1,2 kOhms, Max. Output Level +6 dBu, Signal to Noise Ratio -100 dBu (A weighted)
•Line Output 1 - XLR, electronically balanced, Impedance unbalanced ca. 600 Ohms, Impedance balanced ca. 1,2 kOhms, Max. Output Level +21,5 dBu, Signal to Noise Ratio -94 dBu (A weighted)
•Line Output 2 - XLR and 1/4 inch TRS connection, electronically balanced, Impedance unbalanced ca. 600 Ohms, Impedance balanced ca. 1,2 kOhms, Max. Output Level +21,5 dBu, Signal to Noise Ratio -94 dBu (A weighted)
•Power Supply - Selectable Line Voltages: 115 V AC, 60 Hz, 230 V AC, 50 Hz, Power Consumption: 5,2 VA, Fuses: 110 – 120 V AC: 400 mA slow blow / 220 – 240 V AC: 200 mA slow blow, Power Connector: Standard 3-prong IEC connector
•Height x Width x Depth: 88,2 mm x 482,6 mm x 270 mm / 3,4 x 19 x 10,6 inches
•Weight: 4,8 kg/10,58 lbs