dj service
shopping_cart
LD Systems FX 300 SET

LD Systems - FX 300 SET

Artnr: IDS0110451
Tarneaeg: 6-14 tööpäeva.

LD Systems
277.00 EUR/tk

Igakuine kuumakse alates 11.4 euro

Teave:

Effects processor with 16 digital effects presets in 16-bit quality
Water-repellent bag with 8 mm padding
Power supply unit with 9-volt DC at 500 mA
 

When you take the stage as a singer-songwriter or perform a living room concert, the quality of your sound plays a crucial role in how you are received by the audience. With the FX 300 SET from LD Systems (consisting of effects processor, transport bag and power supply), they will be convinced from the first tone you make – even if there was no time for a proper sound check. The practical little device is not only an effect pedal for your voice and instrument, but also a handy 2-channel mixer. Best of all, the mute functions can be controlled by pedals using your feet or hands. If you want to make an announcement, you can use the FX MUTE pedal to mute all effects so that your voice can be heard clearly without reverberation or delay. If you want neither your microphone signal nor that of your instrument to reach the outputs, simply tap MUTE ALL – extremely practical during breaks or at the end of your set.

The FX 300 offers 16 digital effect presets in 16-bit quality, 2 inputs with separate gain setting and two outputs: one balanced and one unbalanced. Thanks to the +48 V phantom power supply at the mic input, you can connect either a condenser or dynamic microphone. The high-impedance, low-noise instrument input produces impressive sound not only for acoustic guitar and bass, but with any instrument. Thanks to generous headroom, you no longer have to worry about distorted signals. And just in case no power outlet is nearby, the FX 300 can be operated with a 9-volt battery for up to five hours.

 

Product type: Artist Pedal
Type: Home-Recording , Live
Channels: 2
HEADLINE 1: Microphone channels – 1
Mic inputs: XLR/6.3 mm jack
Frequency Response Microphone Channel: 50 – 20000 Hz
Amplification range Microphone channel XLR input: 42 dB
Mono Mic Input Input THD-N: <0,03%
Impedance XLR input: 6000 Ohm(s)
Phantom power: +48V DC to XLR Input
Microphone channel Jack input Input type: Electronically balanced
Amplification range Microphone channel Jack input: 20 dB
THD jack input: <0.045%
Microphone Equalizer: +5/-8dB @ 8kHz
Microphone channel controls: FX SEND , Gain , tone
Microphone Channels Display Elements: hannel signal
HEADLINE 2: Instrument channels
Instrument inputs: 1
gain range: 23 dB
THD: 0.03%
Equalizer: +7/-8dB @ 10kHz
Channel Inserts: 1
Controls: FX SEND , Gain , tone
Indicators: 3-colour LED (SIG) , channel signal
HEADLINE 3 – Main Section
Line outputs: 2
Line output connectors: 6.3 mm TRS , XLR
Output level XLR: Max. +17dBu, balanced
Impedance XLR output: 150 Ohm(s)
Output level Jack output: Max. +5dBV, unbalanced
Impedance jack output: 40 Ohm(s)
Digital Effects Processor: Yes
Number of Presets: 16
Main section controls: DFX Presets , FX MUTE , MIX OUT , MUTE ALL , Power
Display elements Main section: Effekt-Clip , FX MUTE , MUTE ALL , red LED (FX CLIP)
Operating voltage: 9 V block , External mains adapter 9 V DC / 250 mA (not included
Ambient temperature ( in operation ): 0 – 40° °C
Relative Humidity: < 80% (non-condensing)
Width: 160 mm | Height: 55 mm | Length: 163 mm | Weight: 0,65 kg