QSC - GP118SW

Artnr: IDS0118855
Tarneaeg: Kaup on ajutiselt otsas. Kontakteeruge meiega tarneaja prognoosiks. »

Teave:

QSC’s GP118 subwoofer offers a unique solution that addresses the requirements of high end audio reproduction.

Featuring a high excursion, 18" low-frequency transducer mounted in ported enclosures, these systems extend response to the lowest audible frequency.

With an impressive combination of low frequency performance and musical accuracy, the GP118 is an ideal subwoofer companion to QSC’s AcousticPerformance™ Series loudspeakers when used in high output immersive sound surround applications.

Cabinets can be placed on the floor, or suspended from the ceiling to avoid occupying floor seating space.

The GP118 features a single 18-inch transducer that incorporates a double layer spider and triple roll surround for extended and controlled excursion at extreme power.

The 4" voice coil is wound on a fiberglass former to prevent deformation at high operating temperatures and is extensively vented to reduce power compression. An aluminum demodulating ring also further reduces distortion. The GP118 enclosure is constructed of 18mm Baltic birch plywood with internal bracing to eliminate acoustic losses due to panel resonance while maintaining the enclosure’s robustness. Built-in M10 threaded fittings allow the GP118 to be easily and safely suspended (using installer provided hardware).

Further contributions to cabinet rigidity include vent walls constructed of the same plywood as the enclosure. Ample port area allows free movement of air resulting in minimal turbulence and port distortion. Finishing the enclosure’s aesthetic design, the transducer is protected by a 16-gauge, powder coated steel grille. The subwoofers can be stacked vertically using their interlocking feet and recess features machined into the enclosure’s top panel. Features • GP118 features one premiumgrade, long excursion, high power 850 W 18-inch transducer • Interlocking feet and recess features allow for rigid vertical stacking • M10 fittings allows for suspension in permanent and portable applications • Dual NL4 Speakon™ connectors • 18mm Baltic birch plywood construction • 16-Gauge powder coated steel grilles.

GP Series GP118-sw Flyable Subwoofers
Frequency Range (-10dB) 29 Hz to 800 kHz 24 Hz to 1.2 kHz Rated Noise
Power (Voltage)1 850 W continuous power rating

Features
• GP118 features one premium grade, long excursion, high power 850 W 18-inch transducer
• Interlocking feet and recess features allow for rigid vertical stacking
• M10 fittings allows for suspension in permanent and portable applications
• Dual NL4 Speakon™ connectors
• 18mm Baltic birch plywood construction
• 16-Gauge powder coated steel grille