QSC - E115 Passive Speaker
Artnr: IDS0081629
Tarneaeg: Kaup on ajutiselt otsas. Kontakteeruge meiega tarneaja prognoosiks. »
Teave:
The E115 is a trapezoidal, two-way loudspeaker using a 15-inch, 500W, die cast aluminum frame woofer with a 3.5-inch voice coil. It is intended for use when high-power and authoritative low-end are needed from a full-range loudspeaker. A 2.8” compression driver attached to the 75° DMTTMwaveguide assures that even distant listeners will be well covered.
E Series loudspeakers will perform very well with any quality, professional power amplifier – but by taking advantage of the complete E Series Entertainment System, more performance and options are available. Today’s powered loudspeakers rely on finely tuned digital signal processing (DSP) to achieve a higher level of performance. When used with QSC GXD or PLD amplifiers or with a QSC TouchMix digital mixer, E Series loudspeakers can also take advantage of advanced DSP. QSC has developed E Series DSP settings for all three platforms. These settings support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke.
Features
High output, professional quality sound with E115 – 500 W continuous power
E Series Entertainment System – Advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers.
E Series Entertainment System DSP Tunings are now available for PLD, CXD and GXD processing amplifiers:
- For PLD/CXD visit Amplifier Navigator Software
- For GXD visit the GXD Firmware Updater
Titanium diaphragm for high fidelity and long life
Rugged tour-grade textured paint
Foam-lined perforated steel grill
Available U-Style Yoke and M10 rigging kit for permanent installation
Dual angle pole socket
Model
E115
Configuration
1 x 15-inch, 2-way, non-powered
Frequency Response (-6 dB)
55 Hz – 20 kHz
Frequency Range (-10 dB)
43 Hz – 20 kHz
Power capacity1: continuous/peak
500 W / 2000 W
Sensitivity
97 dB, 1 W @ 1 m
Coverage Angle
75° conical DMT
Output2 (peak SPL @ 1 m)
130 dB
Drivers
LF
HF
381 mm (15-inch) driver with 89 mm (3.5-inch) voice coil
38 mm (1.5-inch) exit, 71 mm (2.8-inch) voice coil, compression driver
Nominal Impedance
8Ω
Cross-over
Full-range only 1.55 kHz
Input connectors
2 x NL4, 1 x barrier strip
Enclosure
Trapezoidal, plywood, black texture paint finish. Two side-mounted handles, Perforated, powder-coated steel grille with foam lining.
Dimensions
(WxHxD)
16.5 x 28.2 x 17.5 in
420 x 716 x 445 mm
Net weight
31 kg / 68 lb
Shipping weight
34 kg / 75 lb