+372 537 358 82 / info@djservice.ee
Cart
Ostukorv: tühi

dj service
PreSonus CDL18S EU Active Subwoofer

PreSonus - CDL18S EU Active Subwoofer

Artnr: IDS0078954
Tarneaeg: Kaup on ajutiselt otsas. Kontakteeruge meiega tarneaja prognoosiks. »

2316.00 EUR/pcs

Information:

Huge sound impact
Massive sound reinforcement for your venue. The integrated 1000-watt Class D power amplifier drives the 18" speaker. The low-frequency transducer has a 4mm coil which provides 7mm of driver travel. The unique ported design maximises efficiency in a compact form.

It articulates the bass frequencies excellently and works wonders when integrated into the CDL system. These systems can be stood on stage or flown using the safe and secure custom rigging system.

Onboard processing helps get the job done
With onboard processing power, the CDLs sub allows you to perfectly tune to the room it's based in. Giving you the best possible sound from this fantastic speaker ecosystem. The robust DSP is coupled with the 1000w Class D Amplifier so you're always getting the most responsive reproduction.

The sub can be hooked up to a standard LAN network and remotely controlled using Worx Control software.

This allows you to control aspects like compression, limiting, and delay remotely using a Mac or Windows computer. These speakers can be managed individually or grouped together so that your tunings are consistent.

Dante compatible
The CDL18s can speak Dante. This means if you're a venue or club with a Dante network installed already. The CDL18s can be slot right in next your existing.Perfect if you're venue is missing that low end robustness but you don't want to replace your entire system.

Being able to talk to other Dante products is an integral part of today's audio reproduction world - the CDL18s delivers.

Features
Unique porting
Up to five subs can be flown
Heavy duty 1000w Class D power amp
Worx Control software
Powerful low end reproduction
Dante compatible
Six year warrenty
Specifications
Acoustic Performance
Configuration: Active Subwoofer
Frequency Response (-3 dB): 42 Hz – 150 Hz (Variable)
Frequency Response (-10 dB): 36 Hz – 144 Hz
Maximum Peak SPL: 135 dB
Crossover Frequency: 90 Hz
Transducer
LF Transducer: 1x18" Ferrite magnet
Voice Coil Diameter: 4"
Amplifier
Type: Class D
Total Power Output: 2000W Peak, 1000W Program (500W RMS)
LF Power: 2000W Peak, 1000W Program (500W RMS)
Cooling: Free air convection
Rated THD:
Dynamic Range: 119 dB (A-weighted)
Bandwidth: 20 Hz - 20 kHz
Connections and Controls
Input Channels: 1 Line
Input Connector Types: (XLR)
Line Input Impedance: 40 kΩ
Maximum Input: +4 dBu
Output Connector: 1 XLR, Direct out
Controls: Preset Select, Polarity Invert
Indicators: Over Temperature, Signal, -3 dB, Limiter, Clip, Network Status
DSP
Effects: Compression, Polarity Invert, Limiting, Delay, 8-band EQ and preset selection via WorxControl
Bit Depth: 24-bit
Sample Rate: 48 kHz
Enclosure
Material: 15 mm Eucalyptus plywood
Finish: Chemline™ Polyurea
Grille: Powder-coated steel
Dimensions (HxWxD): 23.2” x 20.8” x 24” (590 mm x 529 mm x 610 mm)
Unit Weight: 105 lbs. (47.6 kg)
Handles: 2 (One on each side)
Safety
Amplifier Protection: Over-current, DC, over/under-voltage, over-temperature, high frequency
Transducer Protection: Limiter
Power
AC Power Input: 90-260V~, 50-60 Hz
AC Power Consumption: (1/8 Power) 4.2 Amps
Suspension Mounting
Rigging Points: M20 Threaded pole receiver, Integrated rigging (10:1 load)