- Mega Menu
Komponendid Line 6
Video & kaamera komplekt
Kondensaator suur membraan
Kondensaator väike membraan
USB & iOS
Video/Kaamera & Shotgun
Shoe extensions & T-bars
Kompressorid ja limiterid
Muud LED valgustid
PAR - prožektorid ja paneelid
Ernie Ball nylon
Ernie Ball steel
- Kaablid ja pistikud
Grado - Gold2 P-Mount Pickup
Tarneaeg: Kaup on ajutiselt otsas. Kontakteeruge meiega tarneaja prognoosiks. »
The Grado's Gold presentation was extremely easy to live with and comfortably communicative. It didn't ram feisty music in my face but maintained it's lively character. For that reason alone, the Grado will probably gel in a great many systems. yet holds its head up in more expensive company, its a definite Best Buy.HIFI + Alan Sircom
I've always found the sound of cartridges other than moving coils to be unrefined by comparison; in particular, the top end of high output designs never quite matches coils for speed, clarity and grace. The Prestige Gold, however, seemed to be sweeter than most. It was lively and detailed but never edgy on vocal sibilants, and didn't over-emphasis leading edges on acoustic guitar. Gold? Smooth? Mellow Yellow! - HI-FI CHOICE
The Prestige series of cartridges are designed for high output and excellent stability under severe use. A considerable tip mass reduction results in a frequency response to 50 kHz and beyond and tracking forces from 1-2 grams. Acclaimed by experts as virtually the finest pickups in the world at their price.
Prestige models available in both 1/2" mount and P-mount. All styli in the Prestige series are user replaceable.
Prestige 2 Both the Silver2 and Gold2 use a four piece OTL cantilever with a Grado specific elliptical diamond stylus mounted on a brass bushing. With the Silver2 and Gold2, a machined turned generator is used to achieve a lower distortion and greater transparency. The Gold2 are hand selected from Silver2 production runs which meet higher test specifications. Approximately 5% of the run usually exhibits these specs and become a Gold2.
Grado’s OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system.
This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.
Grado’s OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.
The Silver2 & Gold2 are all hand assembled by our team in Brooklyn, with some builders having over 25 years of experience. With the recent development of the highly received Lineage Series of cartridges, we were able to have a trickle down of technology and bring a new technique to the Silver2 & Gold2. This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. Our coil winding techniques, using ultra high purity copper wire which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.
As in all Grado phono cartridges the Silver2 & Gold2 are powered by a twin magnet system that optimizes the balance between stereo channels. All
internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado’s patented Flux-Bridger design allows the Silver2 & Gold2 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.
The development of the Epoch in the Lineage Series gave us an in-depth experience with using an outer housing as a damping device. This led to the creation of a process which de-stresses the chassis and dissipates unwanted energy & resonant frequencies, allowing the desired signal to travel freely.
Frequency Response: 10-60
Channel Separation at 1KHz: 35
Input Load: 47K
Output at 1KHz 5CM/sec.: 5mV
Recommended Tracking Force: 1.5
Stylus Type: E
Compliance CUs: 20
Stylus Replacement F=Factory: U
P-mount cartridges (T4P) are designed to be interchangeable. A "T4P" insignia is usually present on the turntable to indicate a P-mount tonearm. So, for all practical purposes any brand below will fit and work in a T4P tonearm
Specifically designed to be user-friendly, the P-MOUNT or T4P cartridge makes changing and setting-up a phono cartridge very simple, easy and fast. It takes only two steps: plug and screw. That's it.
Now why is P-MOUNT desirable? Most users simply want to play and listen to records. To them a turntable is simply a means to an end. The half-inch mount turntable requires several steps to install the cartridge and several other steps to balance and align the cartridge. Balancing and aligning a cartridge are required for optimal tracking, groove retrieval and sound quality. The P-MOUNT design simplifies cartridge installation and eliminates the need for cartridge alignment.